From mboxrd@z Thu Jan 1 00:00:00 1970 From: James Bottomley Subject: Re: aic79xx problems Date: Thu, 20 Sep 2007 09:15:51 -0500 Message-ID: <1190297751.3360.15.camel@localhost.localdomain> References: <20070920130440.GE1606@loop.mdy.univie.ac.at> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from hancock.steeleye.com ([71.30.118.248]:36077 "EHLO hancock.sc.steeleye.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753004AbXITOPx (ORCPT ); Thu, 20 Sep 2007 10:15:53 -0400 In-Reply-To: <20070920130440.GE1606@loop.mdy.univie.ac.at> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Stefan Boresch Cc: linux-scsi@vger.kernel.org On Thu, 2007-09-20 at 15:04 +0200, Stefan Boresch wrote: > I could live with all this if kernels 2.6.2x I have tried would not > simply crash. When the aic79xx module loads, I get again endless > > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< > > listings, but the warnings / error messages get more and more severe > until the system hangs. This shouldn't be happening; we should get the same behaviour as the old kernels (lots of scary warnings and problems but then turn off wide and continue on). Investigating this, unfortunately, is going to be a real pain. However, I think I can cut a cable to simulate your problem. James