From: Frank Lichtenheld <frank@lichtenheld.de>
To: Hannes Reinecke <hare@suse.de>
Cc: linux-scsi@vger.kernel.org,
Randy Dunlap <randy.dunlap@oracle.com>,
Frank Lichtenheld <frank@lichtenheld.de>
Subject: [PATCH alternative] [SCSI] aic7xxx: Fix warnings with CONFIG_PM=n
Date: Fri, 9 Nov 2007 08:55:44 +0100 [thread overview]
Message-ID: <1194594944-14277-1-git-send-email-frank@lichtenheld.de> (raw)
In-Reply-To: <4733A715.70008@oracle.com>
Fixes the following warnings:
CC [M] drivers/scsi/aic7xxx/aic79xx_osm_pci.o
drivers/scsi/aic7xxx/aic79xx_osm_pci.c:101: warning: ‘ahd_linux_pci_dev_suspend’ defined but not used
drivers/scsi/aic7xxx/aic79xx_osm_pci.c:121: warning: ‘ahd_linux_pci_dev_resume’ defined but not used
CC [M] drivers/scsi/aic7xxx/aic7xxx_osm_pci.o
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:148: warning: ‘ahc_linux_pci_dev_suspend’ defined but not used
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:166: warning: ‘ahc_linux_pci_dev_resume’ defined but not used
Reorder code as suggested by Randy Dunlap to minimize
needed #ifdefs
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
---
drivers/scsi/aic7xxx/aic79xx_osm_pci.c | 25 +++++++++++++------------
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c | 25 +++++++++++++------------
2 files changed, 26 insertions(+), 24 deletions(-)
> But "ideally" the functions would be defined before the
> struct pci_driver data, so the prototypes for them could be removed.
Hmm, I'm a bit sceptical about the reordering, but here you go.
Choose whatever you like.
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
index 66f0259..f6dbd3e 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
@@ -50,8 +50,6 @@ static int ahd_linux_pci_reserve_io_regions(struct ahd_softc *ahd,
static int ahd_linux_pci_reserve_mem_region(struct ahd_softc *ahd,
u_long *bus_addr,
uint8_t __iomem **maddr);
-static int ahd_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg);
-static int ahd_linux_pci_dev_resume(struct pci_dev *pdev);
static void ahd_linux_pci_dev_remove(struct pci_dev *pdev);
/* Define the macro locally since it's different for different class of chips.
@@ -85,17 +83,7 @@ static struct pci_device_id ahd_linux_pci_id_table[] = {
MODULE_DEVICE_TABLE(pci, ahd_linux_pci_id_table);
-static struct pci_driver aic79xx_pci_driver = {
- .name = "aic79xx",
- .probe = ahd_linux_pci_dev_probe,
#ifdef CONFIG_PM
- .suspend = ahd_linux_pci_dev_suspend,
- .resume = ahd_linux_pci_dev_resume,
-#endif
- .remove = ahd_linux_pci_dev_remove,
- .id_table = ahd_linux_pci_id_table
-};
-
static int
ahd_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
@@ -139,6 +127,19 @@ ahd_linux_pci_dev_resume(struct pci_dev *pdev)
return rc;
}
+#else
+#define ahd_linux_pci_dev_suspend NULL
+#define ahd_linux_pci_dev_resume NULL
+#endif
+
+static struct pci_driver aic79xx_pci_driver = {
+ .name = "aic79xx",
+ .probe = ahd_linux_pci_dev_probe,
+ .suspend = ahd_linux_pci_dev_suspend,
+ .resume = ahd_linux_pci_dev_resume,
+ .remove = ahd_linux_pci_dev_remove,
+ .id_table = ahd_linux_pci_id_table
+};
static void
ahd_linux_pci_dev_remove(struct pci_dev *pdev)
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
index 4488946..ab53189 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
@@ -49,8 +49,6 @@ static int ahc_linux_pci_reserve_io_region(struct ahc_softc *ahc,
static int ahc_linux_pci_reserve_mem_region(struct ahc_softc *ahc,
u_long *bus_addr,
uint8_t __iomem **maddr);
-static int ahc_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg);
-static int ahc_linux_pci_dev_resume(struct pci_dev *pdev);
static void ahc_linux_pci_dev_remove(struct pci_dev *pdev);
/* Define the macro locally since it's different for different class of chips.
@@ -132,17 +130,7 @@ static struct pci_device_id ahc_linux_pci_id_table[] = {
MODULE_DEVICE_TABLE(pci, ahc_linux_pci_id_table);
-static struct pci_driver aic7xxx_pci_driver = {
- .name = "aic7xxx",
- .probe = ahc_linux_pci_dev_probe,
#ifdef CONFIG_PM
- .suspend = ahc_linux_pci_dev_suspend,
- .resume = ahc_linux_pci_dev_resume,
-#endif
- .remove = ahc_linux_pci_dev_remove,
- .id_table = ahc_linux_pci_id_table
-};
-
static int
ahc_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
@@ -182,6 +170,19 @@ ahc_linux_pci_dev_resume(struct pci_dev *pdev)
return (ahc_resume(ahc));
}
+#else
+#define ahc_linux_pci_dev_suspend NULL
+#define ahc_linux_pci_dev_resume NULL
+#endif
+
+static struct pci_driver aic7xxx_pci_driver = {
+ .name = "aic7xxx",
+ .probe = ahc_linux_pci_dev_probe,
+ .suspend = ahc_linux_pci_dev_suspend,
+ .resume = ahc_linux_pci_dev_resume,
+ .remove = ahc_linux_pci_dev_remove,
+ .id_table = ahc_linux_pci_id_table
+};
static void
ahc_linux_pci_dev_remove(struct pci_dev *pdev)
--
1.5.3.4
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2007-11-09 7:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-08 23:03 [PATCH] [SCSI] aic7xxx: Fix warnings with CONFIG_PM=n Frank Lichtenheld
2007-11-08 23:58 ` Randy Dunlap
2007-11-09 0:12 ` Frank Lichtenheld
2007-11-09 0:17 ` Randy Dunlap
2007-11-09 7:55 ` Frank Lichtenheld [this message]
2007-11-09 16:17 ` [PATCH alternative] " Randy Dunlap
2007-11-12 10:23 ` [PATCH] " Frank Lichtenheld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1194594944-14277-1-git-send-email-frank@lichtenheld.de \
--to=frank@lichtenheld.de \
--cc=hare@suse.de \
--cc=linux-scsi@vger.kernel.org \
--cc=randy.dunlap@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox