From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Nicholas A. Bellinger" Subject: Re: [Cbe-oss-dev] [PATCH] ps3rom: sector size should be 512 bytes Date: Thu, 31 Jan 2008 09:28:09 -0800 Message-ID: <1201800489.11265.134.camel@haakon2.linux-iscsi.org> References: <1201788625.11265.23.camel@haakon2.linux-iscsi.org> <1201793647.3131.8.camel@localhost.localdomain> <1201795855.11265.67.camel@haakon2.linux-iscsi.org> <1201796764.3131.15.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from smtp118.sbc.mail.sp1.yahoo.com ([69.147.64.91]:41367 "HELO smtp118.sbc.mail.sp1.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1765101AbYAaR2h (ORCPT ); Thu, 31 Jan 2008 12:28:37 -0500 In-Reply-To: <1201796764.3131.15.camel@localhost.localdomain> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: James Bottomley Cc: Geert Uytterhoeven , Aegis Lin , Masakazu Mokuno , Cell Broadband Engine OSS Development , linux-scsi@vger.kernel.org, torvalds@linux-foundation.org, akpm@linux-foundation.org, Jens Axboe , Christoph Hellwig On Thu, 2008-01-31 at 10:26 -0600, James Bottomley wrote: > On Thu, 2008-01-31 at 08:10 -0800, Nicholas A. Bellinger wrote: > > On Thu, 2008-01-31 at 09:34 -0600, James Bottomley wrote: > > > On Thu, 2008-01-31 at 06:10 -0800, Nicholas A. Bellinger wrote: > > > > Greetings Geert and Co, > > > > > > > > I have a related patch that I have been using with ps3rom.c for some > > > > time that fixes a bug in fs/bio.c that assumes 512 byte sectors for > > > > ATAPI operations. This bug actually exists for all non 512 byte sector > > > > devices go through this code path (I found it with > > > > scsi_execute_async()), but I first ran into this issue with ps3rom.c > > > > because max_sectors (32) is small enough to trigger the bug assuming 512 > > > > byte sectors during typical ATAPI READ_10 ops with iSCSI/HD. Because > > > > typical max_sector settings for libata and USB are much higher, I have > > > > never ran into this issue outside of ps3rom.c, but the bug exists > > > > nevertheless.. > > > > > > > > The current patch assumes 512 byte sectors, and adds a sector_size > > > > parameter to drivers/scsi/scsi_lib.c:scsi_req_map_sg() to change it for > > > > passed struct request. I know that some folks talked about killing > > > > scsi_execute_async() and fixing this problem elsewhere, but until then > > > > please consider this patch. Any input is also appreciated. > > > > > > My first reaction is really, no; there's no way we should be doing such > > > a nasty layering violation. > > > > > > > I don't care for it either, but without this patch (or something > > similar) all SCSI targets that use scsi_execute_async(), for non 512 > > byte requests are broken. This causes a problem when a small max_sector > > is correctly used by the LLD, and trips the check in > > fs/bio.c:__bio_add_page() > > > > if (((bio->bi_size + len) >> 9) > max_sectors) > > > > Could we rewind this discussion back to an actual problem description > then, please? Nothing in the standard path for a CD/DVD should be using > scsi_execute_async(), what's the actual problem use case? > The problem case is a SCSI Target Mode engine that receives a 2048 Byte single sector ATAPI READ_10 request from the storage fabric, and uses scsi_execute_async() (the only option >= 2.6.18) to issue said request to the underlying struct scsi_device. Because the underlying bio code assumes 512 byte only sectors, the check in __bio_add_page() incorrectly determines that max_sectors (max_sectors has to be low, as with 32 from ps3rom.c) has been exceeded, and fails the request back up the stack. --nab > James > > >