* Re: [PATCH 02/10] scsi: fix integer as NULL pointer warnings [not found] <1209593020.24729.112.camel@brick> @ 2008-04-30 22:29 ` James Bottomley 2008-04-30 22:34 ` Harvey Harrison 2008-05-01 21:50 ` Mark Harvey 0 siblings, 2 replies; 4+ messages in thread From: James Bottomley @ 2008-04-30 22:29 UTC (permalink / raw) To: Harvey Harrison; +Cc: Andrew Morton, LKML, linux-scsi On Wed, 2008-04-30 at 15:03 -0700, Harvey Harrison wrote: > drivers/scsi/FlashPoint.c:906:9: warning: Using plain integer as NULL pointer > drivers/scsi/FlashPoint.c:907:53: warning: Using plain integer as NULL pointer > drivers/scsi/FlashPoint.c:922:1: warning: Using plain integer as NULL pointer > drivers/scsi/aha152x.c:3585:60: warning: Using plain integer as NULL pointer > drivers/scsi/aha152x.c:3845:56: warning: Using plain integer as NULL pointer > drivers/scsi/qla1280.c:2814:37: warning: Using plain integer as NULL pointer > drivers/scsi/atp870u.c:750:47: warning: Using plain integer as NULL pointer > drivers/scsi/3w-9xxx.c:1281:36: warning: Using plain integer as NULL pointer > drivers/scsi/3w-9xxx.c:1293:36: warning: Using plain integer as NULL pointer > drivers/scsi/3w-9xxx.c:1301:35: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:447:10: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:457:10: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:479:24: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:483:22: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:1213:23: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:1214:23: warning: Using plain integer as NULL pointer > > Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> > --- > James, please look at the FlashPoint.c changes in particular. Could you please Cc linux-scsi? That way interested parties get to check their drivers. The flashpoint initialiser changes look wrong: {0} is a conventional notation for zero initialise this structure. Sparse should probably be taught to recognise that. James > drivers/scsi/3w-9xxx.c | 6 +++--- > drivers/scsi/FlashPoint.c | 7 +++---- > drivers/scsi/aha152x.c | 4 ++-- > drivers/scsi/atp870u.c | 2 +- > drivers/scsi/hptiop.c | 12 ++++++------ > drivers/scsi/qla1280.c | 2 +- > 6 files changed, 16 insertions(+), 17 deletions(-) > > diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c > index b31faec..626d6e1 100644 > --- a/drivers/scsi/3w-9xxx.c > +++ b/drivers/scsi/3w-9xxx.c > @@ -1278,7 +1278,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) > error = 0; > /* Check for command packet errors */ > if (full_command_packet->command.newcommand.status != 0) { > - if (tw_dev->srb[request_id] != 0) { > + if (tw_dev->srb[request_id]) { > error = twa_fill_sense(tw_dev, request_id, 1, 1); > } else { > /* Skip ioctl error prints */ > @@ -1290,7 +1290,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) > > /* Check for correct state */ > if (tw_dev->state[request_id] != TW_S_POSTED) { > - if (tw_dev->srb[request_id] != 0) { > + if (tw_dev->srb[request_id]) { > TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted"); > TW_CLEAR_ALL_INTERRUPTS(tw_dev); > goto twa_interrupt_bail; > @@ -1298,7 +1298,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) > } > > /* Check for internal command completion */ > - if (tw_dev->srb[request_id] == 0) { > + if (tw_dev->srb[request_id]) { > if (request_id != tw_dev->chrdev_request_id) { > if (twa_aen_complete(tw_dev, request_id)) > TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt"); > diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c > index b898d38..b252ac5 100644 > --- a/drivers/scsi/FlashPoint.c > +++ b/drivers/scsi/FlashPoint.c > @@ -903,8 +903,8 @@ static void FPT_autoCmdCmplt(unsigned long p_port, unsigned char p_card); > static void FPT_autoLoadDefaultMap(unsigned long p_port); > > static struct sccb_mgr_tar_info FPT_sccbMgrTbl[MAX_CARDS][MAX_SCSI_TAR] = > - { {{0}} }; > -static struct sccb_card FPT_BL_Card[MAX_CARDS] = { {0} }; > + { {{NULL}} }; > +static struct sccb_card FPT_BL_Card[MAX_CARDS] = { {NULL} }; > static SCCBSCAM_INFO FPT_scamInfo[MAX_SCSI_TAR] = { {{0}} }; > static struct nvram_info FPT_nvRamInfo[MAX_MB_CARDS] = { {0} }; > > @@ -918,8 +918,7 @@ static unsigned char FPT_scamHAString[] = > > static unsigned short FPT_default_intena = 0; > > -static void (*FPT_s_PhaseTbl[8]) (unsigned long, unsigned char) = { > -0}; > +static void (*FPT_s_PhaseTbl[8]) (unsigned long, unsigned char) = {NULL}; > > /*--------------------------------------------------------------------- > * > diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c > index f5215fd..0c93a49 100644 > --- a/drivers/scsi/aha152x.c > +++ b/drivers/scsi/aha152x.c > @@ -3582,7 +3582,7 @@ static int checksetup(struct aha152x_setup *setup) > if (i == ARRAY_SIZE(ports)) > return 0; > > - if ( request_region(setup->io_port, IO_RANGE, "aha152x")==0 ) { > + if (!request_region(setup->io_port, IO_RANGE, "aha152x")) { > printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port); > return 0; > } > @@ -3842,7 +3842,7 @@ static int __init aha152x_init(void) > if ((setup_count == 1) && (setup[0].io_port == ports[i])) > continue; > > - if ( request_region(ports[i], IO_RANGE, "aha152x")==0 ) { > + if (!request_region(ports[i], IO_RANGE, "aha152x")) { > printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]); > continue; > } > diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c > index db6de5e..571b43b 100644 > --- a/drivers/scsi/atp870u.c > +++ b/drivers/scsi/atp870u.c > @@ -747,7 +747,7 @@ static void send_s870(struct atp_unit *dev,unsigned char c) > dev->quhd[c] = 0; > } > workreq = dev->quereq[c][dev->quhd[c]]; > - if (dev->id[c][scmd_id(workreq)].curr_req == 0) { > + if (!dev->id[c][scmd_id(workreq)].curr_req) { > dev->id[c][scmd_id(workreq)].curr_req = workreq; > dev->last_cmd[c] = scmd_id(workreq); > goto cmd_subp; > diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c > index 5b7be1e..bc5fb5c 100644 > --- a/drivers/scsi/hptiop.c > +++ b/drivers/scsi/hptiop.c > @@ -444,7 +444,7 @@ static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index) > if (!(pci_resource_flags(pcidev, index) & IORESOURCE_MEM)) { > printk(KERN_ERR "scsi%d: pci resource invalid\n", > hba->host->host_no); > - return 0; > + return NULL; > } > > mem_base_phy = pci_resource_start(pcidev, index); > @@ -454,7 +454,7 @@ static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index) > if (!mem_base_virt) { > printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n", > hba->host->host_no); > - return 0; > + return NULL; > } > return mem_base_virt; > } > @@ -476,11 +476,11 @@ static void hptiop_unmap_pci_bar_itl(struct hptiop_hba *hba) > static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba) > { > hba->u.mv.regs = hptiop_map_pci_bar(hba, 0); > - if (hba->u.mv.regs == 0) > + if (!hba->u.mv.regs) > return -1; > > hba->u.mv.mu = hptiop_map_pci_bar(hba, 2); > - if (hba->u.mv.mu == 0) { > + if (!hba->u.mv.mu) { > iounmap(hba->u.mv.regs); > return -1; > } > @@ -1210,8 +1210,8 @@ static void hptiop_remove(struct pci_dev *pcidev) > > static struct hptiop_adapter_ops hptiop_itl_ops = { > .iop_wait_ready = iop_wait_ready_itl, > - .internal_memalloc = 0, > - .internal_memfree = 0, > + .internal_memalloc = NULL, > + .internal_memfree = NULL, > .map_pci_bar = hptiop_map_pci_bar_itl, > .unmap_pci_bar = hptiop_unmap_pci_bar_itl, > .enable_intr = hptiop_enable_intr_itl, > diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c > index 09ab3ea..d2bc60a 100644 > --- a/drivers/scsi/qla1280.c > +++ b/drivers/scsi/qla1280.c > @@ -2811,7 +2811,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) > > /* Check for room in outstanding command list. */ > for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS && > - ha->outstanding_cmds[cnt] != 0; cnt++); > + ha->outstanding_cmds[cnt] != NULL; cnt++); > > if (cnt >= MAX_OUTSTANDING_COMMANDS) { > status = 1; ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 02/10] scsi: fix integer as NULL pointer warnings 2008-04-30 22:29 ` [PATCH 02/10] scsi: fix integer as NULL pointer warnings James Bottomley @ 2008-04-30 22:34 ` Harvey Harrison 2008-04-30 22:54 ` James Bottomley 2008-05-01 21:50 ` Mark Harvey 1 sibling, 1 reply; 4+ messages in thread From: Harvey Harrison @ 2008-04-30 22:34 UTC (permalink / raw) To: James Bottomley; +Cc: Andrew Morton, LKML, linux-scsi On Wed, 2008-04-30 at 17:29 -0500, James Bottomley wrote: > On Wed, 2008-04-30 at 15:03 -0700, Harvey Harrison wrote: > > drivers/scsi/FlashPoint.c:906:9: warning: Using plain integer as NULL pointer > > drivers/scsi/FlashPoint.c:907:53: warning: Using plain integer as NULL pointer > > drivers/scsi/FlashPoint.c:922:1: warning: Using plain integer as NULL pointer > The flashpoint initialiser changes look wrong: {0} is a conventional > notation for zero initialise this structure. Sparse should probably be > taught to recognise that. Actually, looking closer, should this be initialized at all? Can we just remove the initialization here and let them end up in .bss? Harvey ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 02/10] scsi: fix integer as NULL pointer warnings 2008-04-30 22:34 ` Harvey Harrison @ 2008-04-30 22:54 ` James Bottomley 0 siblings, 0 replies; 4+ messages in thread From: James Bottomley @ 2008-04-30 22:54 UTC (permalink / raw) To: Harvey Harrison; +Cc: Andrew Morton, LKML, linux-scsi On Wed, 2008-04-30 at 15:34 -0700, Harvey Harrison wrote: > On Wed, 2008-04-30 at 17:29 -0500, James Bottomley wrote: > > On Wed, 2008-04-30 at 15:03 -0700, Harvey Harrison wrote: > > > drivers/scsi/FlashPoint.c:906:9: warning: Using plain integer as NULL pointer > > > drivers/scsi/FlashPoint.c:907:53: warning: Using plain integer as NULL pointer > > > drivers/scsi/FlashPoint.c:922:1: warning: Using plain integer as NULL pointer > > > The flashpoint initialiser changes look wrong: {0} is a conventional > > notation for zero initialise this structure. Sparse should probably be > > taught to recognise that. > > Actually, looking closer, should this be initialized at all? Can we > just remove the initialization here and let them end up in .bss? Yes, but the conventional initialiser doesn't change that (as in zero initialise a static and it ends up in bss anyway). James ^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH 02/10] scsi: fix integer as NULL pointer warnings 2008-04-30 22:29 ` [PATCH 02/10] scsi: fix integer as NULL pointer warnings James Bottomley 2008-04-30 22:34 ` Harvey Harrison @ 2008-05-01 21:50 ` Mark Harvey 1 sibling, 0 replies; 4+ messages in thread From: Mark Harvey @ 2008-05-01 21:50 UTC (permalink / raw) To: James Bottomley, Harvey Harrison; +Cc: Andrew Morton, LKML, linux-scsi -----Original Message----- From: linux-scsi-owner@vger.kernel.org [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of James Bottomley Sent: Thursday, May 01, 2008 8:29 AM To: Harvey Harrison Cc: Andrew Morton; LKML; linux-scsi Subject: Re: [PATCH 02/10] scsi: fix integer as NULL pointer warnings On Wed, 2008-04-30 at 15:03 -0700, Harvey Harrison wrote: > drivers/scsi/FlashPoint.c:906:9: warning: Using plain integer as NULL pointer > drivers/scsi/FlashPoint.c:907:53: warning: Using plain integer as NULL pointer > drivers/scsi/FlashPoint.c:922:1: warning: Using plain integer as NULL pointer > drivers/scsi/aha152x.c:3585:60: warning: Using plain integer as NULL pointer > drivers/scsi/aha152x.c:3845:56: warning: Using plain integer as NULL pointer > drivers/scsi/qla1280.c:2814:37: warning: Using plain integer as NULL pointer > drivers/scsi/atp870u.c:750:47: warning: Using plain integer as NULL pointer > drivers/scsi/3w-9xxx.c:1281:36: warning: Using plain integer as NULL pointer > drivers/scsi/3w-9xxx.c:1293:36: warning: Using plain integer as NULL pointer > drivers/scsi/3w-9xxx.c:1301:35: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:447:10: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:457:10: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:479:24: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:483:22: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:1213:23: warning: Using plain integer as NULL pointer > drivers/scsi/hptiop.c:1214:23: warning: Using plain integer as NULL pointer > > Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> > --- > James, please look at the FlashPoint.c changes in particular. Could you please Cc linux-scsi? That way interested parties get to check their drivers. The flashpoint initialiser changes look wrong: {0} is a conventional notation for zero initialise this structure. Sparse should probably be taught to recognise that. James > drivers/scsi/3w-9xxx.c | 6 +++--- > drivers/scsi/FlashPoint.c | 7 +++---- > drivers/scsi/aha152x.c | 4 ++-- > drivers/scsi/atp870u.c | 2 +- > drivers/scsi/hptiop.c | 12 ++++++------ > drivers/scsi/qla1280.c | 2 +- > 6 files changed, 16 insertions(+), 17 deletions(-) > > diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c > index b31faec..626d6e1 100644 > --- a/drivers/scsi/3w-9xxx.c > +++ b/drivers/scsi/3w-9xxx.c > @@ -1278,7 +1278,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) > error = 0; > /* Check for command packet errors */ > if (full_command_packet->command.newcommand.status != 0) { > - if (tw_dev->srb[request_id] != 0) { > + if (tw_dev->srb[request_id]) { > error = twa_fill_sense(tw_dev, request_id, 1, 1); > } else { > /* Skip ioctl error prints */ > @@ -1290,7 +1290,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) > > /* Check for correct state */ > if (tw_dev->state[request_id] != TW_S_POSTED) { > - if (tw_dev->srb[request_id] != 0) { > + if (tw_dev->srb[request_id]) { > TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted"); > TW_CLEAR_ALL_INTERRUPTS(tw_dev); > goto twa_interrupt_bail; > @@ -1298,7 +1298,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) > } > > /* Check for internal command completion */ > - if (tw_dev->srb[request_id] == 0) { > + if (tw_dev->srb[request_id]) { Swapped the test from zero to non-zero ? > if (request_id != tw_dev->chrdev_request_id) { > if (twa_aen_complete(tw_dev, request_id)) > TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt"); > diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c > index b898d38..b252ac5 100644 > --- a/drivers/scsi/FlashPoint.c > +++ b/drivers/scsi/FlashPoint.c > @@ -903,8 +903,8 @@ static void FPT_autoCmdCmplt(unsigned long p_port, unsigned char p_card); > static void FPT_autoLoadDefaultMap(unsigned long p_port); > > static struct sccb_mgr_tar_info FPT_sccbMgrTbl[MAX_CARDS][MAX_SCSI_TAR] = > - { {{0}} }; > -static struct sccb_card FPT_BL_Card[MAX_CARDS] = { {0} }; > + { {{NULL}} }; > +static struct sccb_card FPT_BL_Card[MAX_CARDS] = { {NULL} }; > static SCCBSCAM_INFO FPT_scamInfo[MAX_SCSI_TAR] = { {{0}} }; > static struct nvram_info FPT_nvRamInfo[MAX_MB_CARDS] = { {0} }; > > @@ -918,8 +918,7 @@ static unsigned char FPT_scamHAString[] = > > static unsigned short FPT_default_intena = 0; > > -static void (*FPT_s_PhaseTbl[8]) (unsigned long, unsigned char) = { > -0}; > +static void (*FPT_s_PhaseTbl[8]) (unsigned long, unsigned char) = {NULL}; > > /*--------------------------------------------------------------------- > * > diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c > index f5215fd..0c93a49 100644 > --- a/drivers/scsi/aha152x.c > +++ b/drivers/scsi/aha152x.c > @@ -3582,7 +3582,7 @@ static int checksetup(struct aha152x_setup *setup) > if (i == ARRAY_SIZE(ports)) > return 0; > > - if ( request_region(setup->io_port, IO_RANGE, "aha152x")==0 ) { > + if (!request_region(setup->io_port, IO_RANGE, "aha152x")) { > printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port); > return 0; > } > @@ -3842,7 +3842,7 @@ static int __init aha152x_init(void) > if ((setup_count == 1) && (setup[0].io_port == ports[i])) > continue; > > - if ( request_region(ports[i], IO_RANGE, "aha152x")==0 ) { > + if (!request_region(ports[i], IO_RANGE, "aha152x")) { > printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]); > continue; > } > diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c > index db6de5e..571b43b 100644 > --- a/drivers/scsi/atp870u.c > +++ b/drivers/scsi/atp870u.c > @@ -747,7 +747,7 @@ static void send_s870(struct atp_unit *dev,unsigned char c) > dev->quhd[c] = 0; > } > workreq = dev->quereq[c][dev->quhd[c]]; > - if (dev->id[c][scmd_id(workreq)].curr_req == 0) { > + if (!dev->id[c][scmd_id(workreq)].curr_req) { > dev->id[c][scmd_id(workreq)].curr_req = workreq; > dev->last_cmd[c] = scmd_id(workreq); > goto cmd_subp; > diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c > index 5b7be1e..bc5fb5c 100644 > --- a/drivers/scsi/hptiop.c > +++ b/drivers/scsi/hptiop.c > @@ -444,7 +444,7 @@ static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index) > if (!(pci_resource_flags(pcidev, index) & IORESOURCE_MEM)) { > printk(KERN_ERR "scsi%d: pci resource invalid\n", > hba->host->host_no); > - return 0; > + return NULL; > } > > mem_base_phy = pci_resource_start(pcidev, index); > @@ -454,7 +454,7 @@ static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index) > if (!mem_base_virt) { > printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n", > hba->host->host_no); > - return 0; > + return NULL; > } > return mem_base_virt; > } > @@ -476,11 +476,11 @@ static void hptiop_unmap_pci_bar_itl(struct hptiop_hba *hba) > static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba) > { > hba->u.mv.regs = hptiop_map_pci_bar(hba, 0); > - if (hba->u.mv.regs == 0) > + if (!hba->u.mv.regs) > return -1; > > hba->u.mv.mu = hptiop_map_pci_bar(hba, 2); > - if (hba->u.mv.mu == 0) { > + if (!hba->u.mv.mu) { > iounmap(hba->u.mv.regs); > return -1; > } > @@ -1210,8 +1210,8 @@ static void hptiop_remove(struct pci_dev *pcidev) > > static struct hptiop_adapter_ops hptiop_itl_ops = { > .iop_wait_ready = iop_wait_ready_itl, > - .internal_memalloc = 0, > - .internal_memfree = 0, > + .internal_memalloc = NULL, > + .internal_memfree = NULL, > .map_pci_bar = hptiop_map_pci_bar_itl, > .unmap_pci_bar = hptiop_unmap_pci_bar_itl, > .enable_intr = hptiop_enable_intr_itl, > diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c > index 09ab3ea..d2bc60a 100644 > --- a/drivers/scsi/qla1280.c > +++ b/drivers/scsi/qla1280.c > @@ -2811,7 +2811,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) > > /* Check for room in outstanding command list. */ > for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS && > - ha->outstanding_cmds[cnt] != 0; cnt++); > + ha->outstanding_cmds[cnt] != NULL; cnt++); > > if (cnt >= MAX_OUTSTANDING_COMMANDS) { > status = 1; -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-05-01 21:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1209593020.24729.112.camel@brick>
2008-04-30 22:29 ` [PATCH 02/10] scsi: fix integer as NULL pointer warnings James Bottomley
2008-04-30 22:34 ` Harvey Harrison
2008-04-30 22:54 ` James Bottomley
2008-05-01 21:50 ` Mark Harvey
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox