RE: Re: [PATCH 7/7] scsi_dh: attach to hardware handler fromdm-mpath

[Chandra Seetharaman <sekharan@us.ibm.com>]

Shyam,

Yes, the usefulness is understood. Hannes made that available thru the
dh_state parameter (2/7 of this series). 

Just an FYI.

chandra
On Tue, 2008-05-20 at 00:41 +0530, Shyam_Iyer@Dell.com wrote:
> >Chandra Seetharaman wrote:
> >> Hence, there is no need to attach it again from the multipath layer.
> 
>  Hannes Reinecke wrote:
> >Yes, you do. The user might have it's own custom configuration file,
> covering new/unknown/unhandled/testing devices, which out of necessity
> are _not_
> >hardcoded in the device table of the device handler.
> >So multipath has to have a way of attaching device handler to those
> devices, too. 
> 
> Quite agree. There are a lot of OEM vendors that may use for example the
> LSI RDAC conrtoller but the SCSI inquiry for these devices return the
> OEM device names. 
> The DELL MD3000 is an example of such a box. Instead of hardcoding
> device tables of the handler if they could be configured using a custom
> configuration file enabling new hardware becomes such a bliss.
> 
> -Shyam Iyer
>