public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
	Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PATCH] SCSI fixes for 2.6.27-rc1
Date: Sun, 03 Aug 2008 17:03:05 -0500	[thread overview]
Message-ID: <1217800985.4179.55.camel@localhost.localdomain> (raw)

This is just a small selection of four fixes, one expanding driver
bindings and the other three fixing actual bugs (all of which need
backporting to 2.6.26 I'm afraid).

The patch is available here:

master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git

The short changelog is:

HighPoint Linux Team (1):
      hptiop: add more PCI device IDs

James Bottomley (2):
      scsi_transport_spi: fix oops in revalidate
      ses: fix VPD inquiry overrun

Tim Wright (1):
      block: Fix miscalculation of sg_io timeout in CDROM_SEND_PACKET handler.


The diffstat:

 block/scsi_ioctl.c                |    2 +-
 drivers/scsi/hptiop.c             |    7 +++++++
 drivers/scsi/scsi_transport_spi.c |    8 +++++---
 drivers/scsi/ses.c                |   18 ++++++++++++++----
 4 files changed, 27 insertions(+), 8 deletions(-)

With the full diff attached below.

James

---


diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index c5b9bcf..12a5182 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -518,7 +518,7 @@ int scsi_cmd_ioctl(struct file *file, struct request_queue *q,
 			hdr.sbp = cgc.sense;
 			if (hdr.sbp)
 				hdr.mx_sb_len = sizeof(struct request_sense);
-			hdr.timeout = cgc.timeout;
+			hdr.timeout = jiffies_to_msecs(cgc.timeout);
 			hdr.cmdp = ((struct cdrom_generic_command __user*) arg)->cmd;
 			hdr.cmd_len = sizeof(cgc.cmd);
 
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index da876d3..74d12b5 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -1249,6 +1249,13 @@ static struct pci_device_id hptiop_id_table[] = {
 	{ PCI_VDEVICE(TTI, 0x3522), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4311), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops },
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 75a64a6..b29360e 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -366,12 +366,14 @@ spi_transport_rd_attr(rti, "%d\n");
 spi_transport_rd_attr(pcomp_en, "%d\n");
 spi_transport_rd_attr(hold_mcs, "%d\n");
 
-/* we only care about the first child device so we return 1 */
+/* we only care about the first child device that's a real SCSI device
+ * so we return 1 to terminate the iteration when we find it */
 static int child_iter(struct device *dev, void *data)
 {
-	struct scsi_device *sdev = to_scsi_device(dev);
+	if (!scsi_is_sdev_device(dev))
+		return 0;
 
-	spi_dv_device(sdev);
+	spi_dv_device(to_scsi_device(dev));
 	return 1;
 }
 
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 0fe031f..1bcf3c3 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -345,14 +345,14 @@ static int ses_enclosure_find_by_addr(struct enclosure_device *edev,
 	return 0;
 }
 
-#define VPD_INQUIRY_SIZE 512
+#define VPD_INQUIRY_SIZE 36
 
 static void ses_match_to_enclosure(struct enclosure_device *edev,
 				   struct scsi_device *sdev)
 {
 	unsigned char *buf = kmalloc(VPD_INQUIRY_SIZE, GFP_KERNEL);
 	unsigned char *desc;
-	int len;
+	u16 vpd_len;
 	struct efd efd = {
 		.addr = 0,
 	};
@@ -372,9 +372,19 @@ static void ses_match_to_enclosure(struct enclosure_device *edev,
 			     VPD_INQUIRY_SIZE, NULL, SES_TIMEOUT, SES_RETRIES))
 		goto free;
 
-	len = (buf[2] << 8) + buf[3];
+	vpd_len = (buf[2] << 8) + buf[3];
+	kfree(buf);
+	buf = kmalloc(vpd_len, GFP_KERNEL);
+	if (!buf)
+		return;
+	cmd[3] = vpd_len >> 8;
+	cmd[4] = vpd_len & 0xff;
+	if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf,
+			     vpd_len, NULL, SES_TIMEOUT, SES_RETRIES))
+		goto free;
+
 	desc = buf + 4;
-	while (desc < buf + len) {
+	while (desc < buf + vpd_len) {
 		enum scsi_protocol proto = desc[0] >> 4;
 		u8 code_set = desc[0] & 0x0f;
 		u8 piv = desc[1] & 0x80;



             reply	other threads:[~2008-08-03 22:03 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-03 22:03 James Bottomley [this message]
2008-08-04 14:29 ` [GIT PATCH] SCSI fixes for 2.6.27-rc1 Ben Dooks
2008-08-04 14:15   ` Alan Cox
2008-08-04 21:11     ` Jeff Garzik
2008-08-04 14:44   ` James Bottomley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1217800985.4179.55.camel@localhost.localdomain \
    --to=james.bottomley@hansenpartnership.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox