From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: "ILLES, Marton" <illes.marton@balabit.hu>
Cc: linux-scsi@vger.kernel.org
Subject: Re: SUN Universal Xport no attach blacklist
Date: Tue, 13 Jan 2009 10:47:11 -0600 [thread overview]
Message-ID: <1231865231.4519.15.camel@localhost.localdomain> (raw)
In-Reply-To: <1231771552.7596.11.camel@octane>
On Mon, 2009-01-12 at 15:45 +0100, ILLES, Marton wrote:
> Hi,
>
> I was using a Sun ST2510 device (iSCSI) and a special "block device"
> appeared which is used by SUN Common Array Manager in-band management.
>
> However it also appeared as a block device and caused some IO error:
>
> [ 716.868000] scsi 15:0:0:31: Direct-Access SUN Universal Xport 0735 PQ: 0 ANSI: 5
> [ 716.868000] qla4xxx 0000:04:01.1: scsi(15:0:0:31): Enabled tagged queuing, queue depth 32.
> [ 716.868000] sd 15:0:0:31: [sdf] 40960 512-byte hardware sectors (21 MB)
> [ 716.868000] sd 15:0:0:31: [sdf] Write Protect is off
> [ 716.868000] sd 15:0:0:31: [sdf] Mode Sense: 77 00 10 08
> [ 716.868000] sd 15:0:0:31: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
> [ 716.868000] sd 15:0:0:31: [sdf] 40960 512-byte hardware sectors (21 MB)
> [ 716.868000] sd 15:0:0:31: [sdf] Write Protect is off
> [ 716.868000] sd 15:0:0:31: [sdf] Mode Sense: 77 00 10 08
> [ 716.872000] sd 15:0:0:31: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
> [ 716.872000] sdf: unknown partition table
> [ 716.932000] sd 15:0:0:31: [sdf] Attached SCSI disk
> [ 716.932000] sd 15:0:0:31: Attached scsi generic sg6 type 0
> [ 717.412000] end_request: I/O error, dev sdf, sector 40
> [ 717.412000] Buffer I/O error on device sdf, logical block 5
> [ 717.412000] Buffer I/O error on device sdf, logical block 6
> [ 717.412000] Buffer I/O error on device sdf, logical block 7
> [ 717.412000] Buffer I/O error on device sdf, logical block 8
> [ 717.412000] Buffer I/O error on device sdf, logical block 9
> [ 717.412000] Buffer I/O error on device sdf, logical block 10
> [ 717.412000] Buffer I/O error on device sdf, logical block 11
> [ 717.412000] Buffer I/O error on device sdf, logical block 12
> [ 717.412000] Buffer I/O error on device sdf, logical block 13
> [ 717.412000] Buffer I/O error on device sdf, logical block 14
>
> After some googling it appeared that similar issue has been solved for
> SGI/IBM devices in 4869040512082b761de2d7c35975d01044f8bfea, so here is
> the patch for SUN, please apply.
>
> diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
> index 18dd5cc..fb95b86 100644
> --- a/drivers/scsi/scsi_devinfo.c
> +++ b/drivers/scsi/scsi_devinfo.c
> @@ -219,6 +219,7 @@ static struct {
> {"SGI", "TP9100", "*", BLIST_REPORTLUN2},
> {"SGI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
> {"IBM", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
> + {"SUN", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
OK, I have applied this with difficulty: your email tool has converted
all the tabs in the patch to spaces.
James
prev parent reply other threads:[~2009-01-13 16:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-12 14:45 SUN Universal Xport no attach blacklist ILLES, Marton
2009-01-13 16:47 ` James Bottomley [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1231865231.4519.15.camel@localhost.localdomain \
--to=james.bottomley@hansenpartnership.com \
--cc=illes.marton@balabit.hu \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox