[PATCH 2/4] bnx2: Add support for CNIC driver.

Michael Chan
2009-06-09T01:14:42Z

Add interface and functions to support a new CNIC driver to drive
the Broadcom bnx2 hardware for iSCSI offload.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
drivers/net/bnx2.c | 193 +++++++++++++++++++++++++++++++++++++++++++++++++++-
drivers/net/bnx2.h | 18 +++++
2 files changed, 208 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index b0cb29d..3f5fcb0 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -49,6 +49,10 @@
#include <linux/firmware.h>
#include <linux/log2.h>

+#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
+#define BCM_CNIC 1
+#include "cnic_if.h"
+#endif
#include "bnx2.h"
#include "bnx2_fw.h"

@@ -315,6 +319,158 @@ bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val)
spin_unlock_bh(&bp->indirect_lock);
}

+#ifdef BCM_CNIC
+static int
+bnx2_drv_ctl(struct net_device *dev, struct drv_ctl_info *info)
+{
+ struct bnx2 *bp = netdev_priv(dev);
+ struct drv_ctl_io *io = &info->data.io;
+
+ switch (info->cmd) {
+ case DRV_CTL_IO_WR_CMD:
+ bnx2_reg_wr_ind(bp, io->offset, io->data);
+ break;
+ case DRV_CTL_IO_RD_CMD:
+ io->data = bnx2_reg_rd_ind(bp, io->offset);
+ break;
+ case DRV_CTL_CTX_WR_CMD:
+ bnx2_ctx_wr(bp, io->cid_addr, io->offset, io->data);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void bnx2_setup_cnic_irq_info(struct bnx2 *bp)
+{
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+ struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+ int sb_id;
+
+ if (bp->flags & BNX2_FLAG_USING_MSIX) {
+ cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
+ bnapi->cnic_present = 0;
+ sb_id = bp->irq_nvecs;
+ cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
+ } else {
+ cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
+ bnapi->cnic_tag = bnapi->last_status_idx;
+ bnapi->cnic_present = 1;
+ sb_id = 0;
+ cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
+ }
+
+ cp->irq_arr[0].vector = bp->irq_tbl[sb_id].vector;
+ cp->irq_arr[0].status_blk = (void *)
+ ((unsigned long) bnapi->status_blk.msi +
+ (BNX2_SBLK_MSIX_ALIGN_SIZE * sb_id));
+ cp->irq_arr[0].status_blk_num = sb_id;
+ cp->num_irq = 1;
+}
+
+static int bnx2_register_cnic(struct net_device *dev, struct cnic_ops *ops,
+ void *data)
+{
+ struct bnx2 *bp = netdev_priv(dev);
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+ if (ops == NULL)
+ return -EINVAL;
+
+ if (cp->drv_state & CNIC_DRV_STATE_REGD)
+ return -EBUSY;
+
+ bp->cnic_data = data;
+ rcu_assign_pointer(bp->cnic_ops, ops);
+
+ cp->num_irq = 0;
+ cp->drv_state = CNIC_DRV_STATE_REGD;
+
+ bnx2_setup_cnic_irq_info(bp);
+
+ return 0;
+}
+
+static int bnx2_unregister_cnic(struct net_device *dev)
+{
+ struct bnx2 *bp = netdev_priv(dev);
+ struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+ cp->drv_state = 0;
+ bnapi->cnic_present = 0;
+ rcu_assign_pointer(bp->cnic_ops, NULL);
+ synchronize_rcu();
+ return 0;
+}
+
+struct cnic_eth_dev *bnx2_cnic_probe(struct net_device *dev)
+{
+ struct bnx2 *bp = netdev_priv(dev);
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+ cp->drv_owner = THIS_MODULE;
+ cp->chip_id = bp->chip_id;
+ cp->pdev = bp->pdev;
+ cp->io_base = bp->regview;
+ cp->drv_ctl = bnx2_drv_ctl;
+ cp->drv_register_cnic = bnx2_register_cnic;
+ cp->drv_unregister_cnic = bnx2_unregister_cnic;
+
+ return cp;
+}
+EXPORT_SYMBOL(bnx2_cnic_probe);
+
+static void
+bnx2_cnic_stop(struct bnx2 *bp)
+{
+ struct cnic_ops *c_ops;
+ struct cnic_ctl_info info;
+
+ rcu_read_lock();
+ c_ops = rcu_dereference(bp->cnic_ops);
+ if (c_ops) {
+ info.cmd = CNIC_CTL_STOP_CMD;
+ c_ops->cnic_ctl(bp->cnic_data, &info);
+ }
+ rcu_read_unlock();
+}
+
+static void
+bnx2_cnic_start(struct bnx2 *bp)
+{
+ struct cnic_ops *c_ops;
+ struct cnic_ctl_info info;
+
+ rcu_read_lock();
+ c_ops = rcu_dereference(bp->cnic_ops);
+ if (c_ops) {
+ if (!(bp->flags & BNX2_FLAG_USING_MSIX)) {
+ struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+
+ bnapi->cnic_tag = bnapi->last_status_idx;
+ }
+ info.cmd = CNIC_CTL_START_CMD;
+ c_ops->cnic_ctl(bp->cnic_data, &info);
+ }
+ rcu_read_unlock();
+}
+
+#else
+
+static void
+bnx2_cnic_stop(struct bnx2 *bp)
+{
+}
+
+static void
+bnx2_cnic_start(struct bnx2 *bp)
+{
+}
+
+#endif
+
static int
bnx2_read_phy(struct bnx2 *bp, u32 reg, u32 *val)
{
@@ -488,6 +644,7 @@ bnx2_napi_enable(struct bnx2 *bp)
static void
bnx2_netif_stop(struct bnx2 *bp)
{
+ bnx2_cnic_stop(bp);
bnx2_disable_int_sync(bp);
if (netif_running(bp->dev)) {
bnx2_napi_disable(bp);
@@ -504,6 +661,7 @@ bnx2_netif_start(struct bnx2 *bp)
netif_tx_wake_all_queues(bp->dev);
bnx2_napi_enable(bp);
bnx2_enable_int(bp);
+ bnx2_cnic_start(bp);
}
}
}
@@ -3164,6 +3322,11 @@ bnx2_has_work(struct bnx2_napi *bnapi)
if (bnx2_has_fast_work(bnapi))
return 1;

+#ifdef BCM_CNIC
+ if (bnapi->cnic_present && (bnapi->cnic_tag != sblk->status_idx))
+ return 1;
+#endif
+
if ((sblk->status_attn_bits & STATUS_ATTN_EVENTS) !=
(sblk->status_attn_bits_ack & STATUS_ATTN_EVENTS))
return 1;
@@ -3193,6 +3356,23 @@ bnx2_chk_missed_msi(struct bnx2 *bp)
bp->idle_chk_status_idx = bnapi->last_status_idx;
}

+#ifdef BCM_CNIC
+static void bnx2_poll_cnic(struct bnx2 *bp, struct bnx2_napi *bnapi)
+{
+ struct cnic_ops *c_ops;
+
+ if (!bnapi->cnic_present)
+ return;
+
+ rcu_read_lock();
+ c_ops = rcu_dereference(bp->cnic_ops);
+ if (c_ops)
+ bnapi->cnic_tag = c_ops->cnic_handler(bp->cnic_data,
+ bnapi->status_blk.msi);
+ rcu_read_unlock();
+}
+#endif
+
static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi)
{
struct status_block *sblk = bnapi->status_blk.msi;
@@ -3267,6 +3447,10 @@ static int bnx2_poll(struct napi_struct *napi, int budget)

work_done = bnx2_poll_work(bp, bnapi, work_done, budget);

+#ifdef BCM_CNIC
+ bnx2_poll_cnic(bp, bnapi);
+#endif
+
/* bnapi->last_status_idx is used below to tell the hw how
* much work has been processed, so we must read it before
* checking for more work.
@@ -4632,8 +4816,11 @@ bnx2_init_chip(struct bnx2 *bp)
val = REG_RD(bp, BNX2_MQ_CONFIG);
val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
- if (CHIP_ID(bp) == CHIP_ID_5709_A0 || CHIP_ID(bp) == CHIP_ID_5709_A1)
- val |= BNX2_MQ_CONFIG_HALT_DIS;
+ if (CHIP_NUM(bp) == CHIP_NUM_5709) {
+ val |= BNX2_MQ_CONFIG_BIN_MQ_MODE;
+ if (CHIP_REV(bp) == CHIP_REV_Ax)
+ val |= BNX2_MQ_CONFIG_HALT_DIS;
+ }

REG_WR(bp, BNX2_MQ_CONFIG, val);

@@ -7471,7 +7658,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
INIT_WORK(&bp->reset_task, bnx2_reset_task);

dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
- mem_len = MB_GET_CID_ADDR(TX_TSS_CID + TX_MAX_TSS_RINGS);
+ mem_len = MB_GET_CID_ADDR(TX_TSS_CID + TX_MAX_TSS_RINGS + 1);
dev->mem_end = dev->mem_start + mem_len;
dev->irq = pdev->irq;

diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 5b570e1..a1ff739 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -361,6 +361,9 @@ struct l2_fhdr {
#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28)

#define BNX2_L2CTX_HOST_BDIDX 0x00000004
+#define BNX2_L2CTX_STATUSB_NUM_SHIFT 16
+#define BNX2_L2CTX_STATUSB_NUM(sb_id) \
+ (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0)
#define BNX2_L2CTX_HOST_BSEQ 0x00000008
#define BNX2_L2CTX_NX_BSEQ 0x0000000c
#define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010
@@ -5900,6 +5903,7 @@ struct l2_fhdr {
#define BNX2_RXP_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)

#define BNX2_RXP_SCRATCH 0x000e0000
+#define BNX2_RXP_SCRATCH_RXP_FLOOD 0x000e0024
#define BNX2_RXP_SCRATCH_RSS_TBL_SZ 0x000e0038
#define BNX2_RXP_SCRATCH_RSS_TBL 0x000e003c
#define BNX2_RXP_SCRATCH_RSS_TBL_MAX_ENTRIES 128
@@ -6678,6 +6682,11 @@ struct bnx2_napi {
u32 last_status_idx;
u32 int_num;

+#ifdef BCM_CNIC
+ u32 cnic_tag;
+ int cnic_present;
+#endif
+
struct bnx2_rx_ring_info rx_ring;
struct bnx2_tx_ring_info tx_ring;
};
@@ -6727,6 +6736,11 @@ struct bnx2 {
int tx_ring_size;
u32 tx_wake_thresh;

+#ifdef BCM_CNIC
+ struct cnic_ops *cnic_ops;
+ void *cnic_data;
+#endif
+
/* End of fields used in the performance code paths. */

unsigned int current_interval;
@@ -6885,6 +6899,10 @@ struct bnx2 {

u32 idle_chk_status_idx;

+#ifdef BCM_CNIC
+ struct cnic_eth_dev cnic_eth_dev;
+#endif
+
const struct firmware *mips_firmware;
const struct firmware *rv2p_firmware;
};
--
1.5.6.GIT