From mboxrd@z Thu Jan 1 00:00:00 1970 From: James Bottomley Subject: Re: [PATCH 6/6] fnic: Patch MAINTAINERS, scsi Makefile, scsi Kconfig Date: Thu, 25 Jun 2009 12:00:35 -0500 Message-ID: <1245949235.4170.63.camel@mulgrave.site> References: <20090418012941.24787.58754.stgit@feynman.nuovasystems.com> <20090418013322.24787.53673.stgit@feynman.nuovasystems.com> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from bedivere.hansenpartnership.com ([66.63.167.143]:41409 "EHLO bedivere.hansenpartnership.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751514AbZFYRAg (ORCPT ); Thu, 25 Jun 2009 13:00:36 -0400 In-Reply-To: <20090418013322.24787.53673.stgit@feynman.nuovasystems.com> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Abhijeet Joglekar Cc: linux-scsi@vger.kernel.org, jeykholt@cisco.com On Fri, 2009-04-17 at 18:33 -0700, Abhijeet Joglekar wrote: > Patch MAINTAINERS file, add fnic module to scsi Makefile and Kconfig > > Signed-off-by: Abhijeet Joglekar > Signed-off-by: Joe Eykholt > Signed-off-by: Mike Christie > --- > MAINTAINERS | 8 ++++++++ > drivers/scsi/Kconfig | 11 +++++++++++ > drivers/scsi/Makefile | 1 + > 3 files changed, 20 insertions(+), 0 deletions(-) > > > diff --git a/MAINTAINERS b/MAINTAINERS > index ebaf77e..405f574 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -1167,6 +1167,14 @@ P: Nils Faerber (port to kernel 2.4) > M: Nils Faerber > S: Maintained > > +CISCO FCOE HBA DRIVER > +P: Abhijeet Joglekar > +M: abjoglek@cisco.com > +P: Joe Eykholt > +M: jeykholt@cisco.com > +L: linux-scsi@vger.kernel.org > +S: Supported > + > CODA FILE SYSTEM > P: Jan Harkes > M: jaharkes@cs.cmu.edu > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > index 876cd20..d45f3ad 100644 > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -628,6 +628,17 @@ config FCOE > ---help--- > Fibre Channel over Ethernet module > > +config FCOE_FNIC > + tristate "Cisco FNIC Driver" > + depends on PCI && X86 Why is this marked X86 only? Surely as a PCIe card it should work on any architecture? James