From: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
To: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>,
Mike Christie <michaelc@cs.wisc.edu>,
Christoph Hellwig <hch@lst.de>, Hannes Reinecke <hare@suse.de>,
James Bottomley <James.Bottomley@suse.de>,
Jens Axboe <axboe@kernel.dk>, Boaz Harrosh <bharrosh@panasas.com>,
Nicholas Bellinger <nab@linux-iscsi.org>
Subject: [RFC 00/22] TCM Core and TCM_Loop patches for v2.6.37
Date: Mon, 30 Aug 2010 02:19:54 -0700 [thread overview]
Message-ID: <1283159994-6536-1-git-send-email-nab@linux-iscsi.org> (raw)
From: Nicholas Bellinger <nab@linux-iscsi.org>
Greetings Tomo-san, hch, jejb, mnc, boaz, and Co,
The following is a reviewable series containing TCM Core and TCM_Loop v4.0.0-rc3
against a fresh v2.6.36-rc3 clone who's commit log has been broken up to be reviewable,
rather than historical. This code is intended for mainline v2.6.37 acceptance, and
is currently going through a final round of public review.
The tree can be found here:
git://git.kernel.org/pub/scm/linux/kernel/git/nab/lio-4.0.git master
The patches can also be found individually here:
http://www.kernel.org/pub/linux/kernel/people/nab/TCM-v4-patches-for-v2.6.36-rc3/
Please have a look at the code at your earliest convience. I will be making any
required changes into lio-core-2.6.git/lio-4.0, and respining this tree as necessary
for an upstream maintainer pull for v2.6.37.
Thanks!
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger (22):
scsi: Add missing SPC-4 CDB and MAINTENANCE_[IN,OUT] service action
definitions
configfs: Add struct configfs_item_operations->check_link() in
configfs_unlink()
tcm: Add ConfigFS extended macro set
tcm: Add v4 base data structures and struct target_core_fabric_ops
tcm: Add SPC-4 explict and implict Asymmetric Logical Unit Access
(ALUA)
tcm: Add ConfigFS subsystem backstore infrastructure
tcm: Add fabric and subsystem transport engine core
tcm: Add HBA core infrastructure
tcm: Add device core infrastructure
tcm: Add target portal group infrastructure
tcm: Add SPC-4 compliant Persistent Reservations (PR)
tcm: Add Task Management infrastructure
tcm: Add UNIT_ATTENTION infrastructure support
tcm: Add SCSI MIB statistics support
tcm: Add FILEIO subsystem plugin
tcm: Add IBLOCK subsystem plugin
tcm: Add PSCSI subsystem plugin
tcm: Add RAMDISK_DR and RAMDISK_MCP subsystem plugins
tcm: Add generic fabric independent ConfigFS infrastructure
tcm: Add generic ProtoID and TransportID fabric handlers for SAS, FC,
and iSCSI
tcm: Add Kbuild and Kconfig for drivers/target,
Documentation/target/tcm_mod_builder.py
tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module
Documentation/target/tcm_mod_builder.py | 1039 +++
Documentation/target/tcm_mod_builder.txt | 138 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/target/Kbuild | 30 +
drivers/target/Kconfig | 36 +
drivers/target/target_core_alua.c | 1986 ++++++
drivers/target/target_core_alua.h | 134 +
drivers/target/target_core_configfs.c | 3334 ++++++++++
drivers/target/target_core_device.c | 1736 +++++
drivers/target/target_core_fabric_configfs.c | 979 +++
drivers/target/target_core_fabric_lib.c | 452 ++
drivers/target/target_core_file.c | 1185 ++++
drivers/target/target_core_file.h | 81 +
drivers/target/target_core_hba.c | 211 +
drivers/target/target_core_hba.h | 14 +
drivers/target/target_core_iblock.c | 1173 ++++
drivers/target/target_core_iblock.h | 44 +
drivers/target/target_core_mib.c | 1063 +++
drivers/target/target_core_mib.h | 31 +
drivers/target/target_core_pr.c | 4244 ++++++++++++
drivers/target/target_core_pr.h | 67 +
drivers/target/target_core_pscsi.c | 1510 +++++
drivers/target/target_core_pscsi.h | 68 +
drivers/target/target_core_rd.c | 1518 +++++
drivers/target/target_core_rd.h | 89 +
drivers/target/target_core_scdb.c | 149 +
drivers/target/target_core_scdb.h | 13 +
drivers/target/target_core_tmr.c | 405 ++
drivers/target/target_core_tpg.c | 844 +++
drivers/target/target_core_transport.c | 8272 ++++++++++++++++++++++++
drivers/target/target_core_ua.c | 332 +
drivers/target/target_core_ua.h | 36 +
drivers/target/tcm_loop/Kbuild | 11 +
drivers/target/tcm_loop/Kconfig | 13 +
drivers/target/tcm_loop/tcm_loop_configfs.c | 676 ++
drivers/target/tcm_loop/tcm_loop_configfs.h | 2 +
drivers/target/tcm_loop/tcm_loop_core.h | 79 +
drivers/target/tcm_loop/tcm_loop_fabric.c | 567 ++
drivers/target/tcm_loop/tcm_loop_fabric.h | 45 +
drivers/target/tcm_loop/tcm_loop_fabric_scsi.c | 659 ++
drivers/target/tcm_loop/tcm_loop_fabric_scsi.h | 10 +
fs/configfs/symlink.c | 13 +
include/linux/configfs.h | 1 +
include/scsi/scsi.h | 24 +
include/target/configfs_macros.h | 147 +
include/target/target_core_base.h | 985 +++
include/target/target_core_configfs.h | 57 +
include/target/target_core_device.h | 67 +
include/target/target_core_fabric_configfs.h | 106 +
include/target/target_core_fabric_lib.h | 28 +
include/target/target_core_fabric_ops.h | 89 +
include/target/target_core_tmr.h | 43 +
include/target/target_core_tpg.h | 38 +
include/target/target_core_transport.h | 560 ++
55 files changed, 35436 insertions(+), 0 deletions(-)
create mode 100755 Documentation/target/tcm_mod_builder.py
create mode 100644 Documentation/target/tcm_mod_builder.txt
create mode 100644 drivers/target/Kbuild
create mode 100644 drivers/target/Kconfig
create mode 100644 drivers/target/target_core_alua.c
create mode 100644 drivers/target/target_core_alua.h
create mode 100644 drivers/target/target_core_configfs.c
create mode 100644 drivers/target/target_core_device.c
create mode 100644 drivers/target/target_core_fabric_configfs.c
create mode 100644 drivers/target/target_core_fabric_lib.c
create mode 100644 drivers/target/target_core_file.c
create mode 100644 drivers/target/target_core_file.h
create mode 100644 drivers/target/target_core_hba.c
create mode 100644 drivers/target/target_core_hba.h
create mode 100644 drivers/target/target_core_iblock.c
create mode 100644 drivers/target/target_core_iblock.h
create mode 100644 drivers/target/target_core_mib.c
create mode 100644 drivers/target/target_core_mib.h
create mode 100644 drivers/target/target_core_pr.c
create mode 100644 drivers/target/target_core_pr.h
create mode 100644 drivers/target/target_core_pscsi.c
create mode 100644 drivers/target/target_core_pscsi.h
create mode 100644 drivers/target/target_core_rd.c
create mode 100644 drivers/target/target_core_rd.h
create mode 100644 drivers/target/target_core_scdb.c
create mode 100644 drivers/target/target_core_scdb.h
create mode 100644 drivers/target/target_core_tmr.c
create mode 100644 drivers/target/target_core_tpg.c
create mode 100644 drivers/target/target_core_transport.c
create mode 100644 drivers/target/target_core_ua.c
create mode 100644 drivers/target/target_core_ua.h
create mode 100644 drivers/target/tcm_loop/Kbuild
create mode 100644 drivers/target/tcm_loop/Kconfig
create mode 100644 drivers/target/tcm_loop/tcm_loop_configfs.c
create mode 100644 drivers/target/tcm_loop/tcm_loop_configfs.h
create mode 100644 drivers/target/tcm_loop/tcm_loop_core.h
create mode 100644 drivers/target/tcm_loop/tcm_loop_fabric.c
create mode 100644 drivers/target/tcm_loop/tcm_loop_fabric.h
create mode 100644 drivers/target/tcm_loop/tcm_loop_fabric_scsi.c
create mode 100644 drivers/target/tcm_loop/tcm_loop_fabric_scsi.h
create mode 100644 include/target/configfs_macros.h
create mode 100644 include/target/target_core_base.h
create mode 100644 include/target/target_core_configfs.h
create mode 100644 include/target/target_core_device.h
create mode 100644 include/target/target_core_fabric_configfs.h
create mode 100644 include/target/target_core_fabric_lib.h
create mode 100644 include/target/target_core_fabric_ops.h
create mode 100644 include/target/target_core_tmr.h
create mode 100644 include/target/target_core_tpg.h
create mode 100644 include/target/target_core_transport.h
--
1.7.2.2
reply other threads:[~2010-08-30 9:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1283159994-6536-1-git-send-email-nab@linux-iscsi.org \
--to=nab@linux-iscsi.org \
--cc=James.Bottomley@suse.de \
--cc=axboe@kernel.dk \
--cc=bharrosh@panasas.com \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=michaelc@cs.wisc.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).