Re: [PATCH scsi-misc-2.6] sd: implement sd_check_events()

Re: [PATCH scsi-misc-2.6] sd: implement sd_check_events()

[James Bottomley]

Added cc: linux-scsi

On Sat, 2010-12-18 at 18:42 +0100, Tejun Heo wrote:
> Replace sd_media_change() with sd_check_events().
> 
> * Move media removed logic into set_media_not_present() and
>   media_not_present() and set sdev->changed iff an existing media is
>   removed or the device indicates UNIT_ATTENTION.
> 
> * Make sd_check_events() sets sdev->changed if previously missing
>   media becomes present.
> 
> * Event is reported only if sdev->changed is set.
> 
> This makes media presence event reported if scsi_disk->media_present
> actually changed or the device indicated UNIT_ATTENTION.  For backward
> compatibility, SDEV_EVT_MEDIA_CHANGE is generated each time
> sd_check_events() detects media change event.
> 
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: Kay Sievers <kay.sievers@vrfy.org>
> ---
> Here it is.  The conflicts were due to Alan's recent patch, which was
> in the similar direction anyway.

This looks fine to me.  Jens can you strip the SCSI patches out of your
tree and I'll run them through a postmerge tree to get the fix up?

James


> Thanks.
> 
>  drivers/scsi/sd.c |   99 +++++++++++++++++++++++++++---------------------------
>  drivers/scsi/sd.h |    1
>  2 files changed, 50 insertions(+), 50 deletions(-)
> 
> Index: work/drivers/scsi/sd.c
> ===================================================================
> --- work.orig/drivers/scsi/sd.c
> +++ work/drivers/scsi/sd.c
> @@ -990,30 +990,50 @@ out:
> 
>  static void set_media_not_present(struct scsi_disk *sdkp)
>  {
> +	if (sdkp->media_present)
> +		sdkp->device->changed = 1;
>  	sdkp->media_present = 0;
>  	sdkp->capacity = 0;
> -	sdkp->device->changed = 1;
> +}
> +
> +static int media_not_present(struct scsi_disk *sdkp,
> +			     struct scsi_sense_hdr *sshdr)
> +{
> +	if (!scsi_sense_valid(sshdr))
> +		return 0;
> +
> +	/* not invoked for commands that could return deferred errors */
> +	switch (sshdr->sense_key) {
> +	case UNIT_ATTENTION:
> +		sdkp->device->changed = 1;
> +		/* fall through */
> +	case NOT_READY:
> +		/* medium not present */
> +		if (sshdr->asc == 0x3A) {
> +			set_media_not_present(sdkp);
> +			return 1;
> +		}
> +	}
> +	return 0;
>  }
> 
>  /**
> - *	sd_media_changed - check if our medium changed
> - *	@disk: kernel device descriptor
> + *	sd_check_events - check media events
> + *	@disk: kernel device descriptor
> + *	@clearing: disk events currently being cleared
>   *
> - *	Returns 0 if not applicable or no change; 1 if change
> + *	Returns mask of DISK_EVENT_*.
>   *
>   *	Note: this function is invoked from the block subsystem.
>   **/
> -static int sd_media_changed(struct gendisk *disk)
> +static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
>  {
>  	struct scsi_disk *sdkp = scsi_disk(disk);
>  	struct scsi_device *sdp = sdkp->device;
>  	struct scsi_sense_hdr *sshdr = NULL;
>  	int retval;
> 
> -	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_media_changed\n"));
> -
> -	if (!sdp->removable)
> -		return 0;
> +	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
> 
>  	/*
>  	 * If the device is offline, don't send any commands - just pretend as
> @@ -1043,40 +1063,37 @@ static int sd_media_changed(struct gendi
>  					      sshdr);
>  	}
> 
> -	if (retval) {
> +	/* failed to execute TUR, assume media not present */
> +	if (host_byte(retval)) {
>  		set_media_not_present(sdkp);
>  		goto out;
>  	}
> 
> +	if (media_not_present(sdkp, sshdr))
> +		goto out;
> +
>  	/*
>  	 * For removable scsi disk we have to recognise the presence
> -	 * of a disk in the drive. This is kept in the struct scsi_disk
> -	 * struct and tested at open !  Daniel Roche (dan@lectra.fr)
> +	 * of a disk in the drive.
>  	 */
> +	if (!sdkp->media_present)
> +		sdp->changed = 1;
>  	sdkp->media_present = 1;
> -
>  out:
>  	/*
> -	 * Report a media change under the following conditions:
> +	 * sdp->changed is set under the following conditions:
>  	 *
> -	 *	Medium is present now and wasn't present before.
> -	 *	Medium wasn't present before and is present now.
> -	 *	Medium was present at all times, but it changed while
> -	 *		we weren't looking (sdp->changed is set).
> +	 *	Medium present state has changed in either direction.
> +	 *	Device has indicated UNIT_ATTENTION.
>  	 *
> -	 * If there was no medium before and there is no medium now then
> -	 * don't report a change, even if a medium was inserted and removed
> -	 * while we weren't looking.
> +	 * Report SDEV_EVT_MEDIA_CHANGE too for backward compatibility.
>  	 */
> -	retval = (sdkp->media_present != sdkp->previous_state ||
> -			(sdkp->media_present && sdp->changed));
> -	if (retval)
> +	if (sdp->changed)
>  		sdev_evt_send_simple(sdp, SDEV_EVT_MEDIA_CHANGE, GFP_KERNEL);
> -	sdkp->previous_state = sdkp->media_present;
> -
> -	/* sdp->changed indicates medium was changed or is not present */
> -	sdp->changed = !sdkp->media_present;
>  	kfree(sshdr);
> +
> +	retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
> +	sdp->changed = 0;
>  	return retval;
>  }
> 
> @@ -1169,7 +1186,7 @@ static const struct block_device_operati
>  #ifdef CONFIG_COMPAT
>  	.compat_ioctl		= sd_compat_ioctl,
>  #endif
> -	.media_changed		= sd_media_changed,
> +	.check_events		= sd_check_events,
>  	.revalidate_disk	= sd_revalidate_disk,
>  	.unlock_native_capacity	= sd_unlock_native_capacity,
>  };
> @@ -1305,23 +1322,6 @@ static int sd_done(struct scsi_cmnd *SCp
>  	return good_bytes;
>  }
> 
> -static int media_not_present(struct scsi_disk *sdkp,
> -			     struct scsi_sense_hdr *sshdr)
> -{
> -
> -	if (!scsi_sense_valid(sshdr))
> -		return 0;
> -	/* not invoked for commands that could return deferred errors */
> -	if (sshdr->sense_key != NOT_READY &&
> -	    sshdr->sense_key != UNIT_ATTENTION)
> -		return 0;
> -	if (sshdr->asc != 0x3A) /* medium not present */
> -		return 0;
> -
> -	set_media_not_present(sdkp);
> -	return 1;
> -}
> -
>  /*
>   * spinup disk - called only in sd_revalidate_disk()
>   */
> @@ -1496,7 +1496,7 @@ static void read_capacity_error(struct s
>  	 */
>  	if (sdp->removable &&
>  	    sense_valid && sshdr->sense_key == NOT_READY)
> -		sdp->changed = 1;
> +		set_media_not_present(sdkp);
> 
>  	/*
>  	 * We used to set media_present to 0 here to indicate no media
> @@ -2382,8 +2382,10 @@ static void sd_probe_async(void *data, a
> 
>  	gd->driverfs_dev = &sdp->sdev_gendev;
>  	gd->flags = GENHD_FL_EXT_DEVT;
> -	if (sdp->removable)
> +	if (sdp->removable) {
>  		gd->flags |= GENHD_FL_REMOVABLE;
> +		gd->events |= DISK_EVENT_MEDIA_CHANGE;
> +	}
> 
>  	add_disk(gd);
>  	sd_dif_config_host(sdkp);
> @@ -2465,7 +2467,6 @@ static int sd_probe(struct device *dev)
>  	sdkp->disk = gd;
>  	sdkp->index = index;
>  	atomic_set(&sdkp->openers, 0);
> -	sdkp->previous_state = 1;
> 
>  	if (!sdp->request_queue->rq_timeout) {
>  		if (sdp->type != TYPE_MOD)
> Index: work/drivers/scsi/sd.h
> ===================================================================
> --- work.orig/drivers/scsi/sd.h
> +++ work/drivers/scsi/sd.h
> @@ -55,7 +55,6 @@ struct scsi_disk {
>  	u8		media_present;
>  	u8		write_prot;
>  	u8		protection_type;/* Data Integrity Field */
> -	unsigned	previous_state : 1;
>  	unsigned	ATO : 1;	/* state of disk ATO bit */
>  	unsigned	WCE : 1;	/* state of disk WCE bit */
>  	unsigned	RCD : 1;	/* state of disk RCD bit, unused */

Re: [PATCH scsi-misc-2.6] sd: implement sd_check_events()

[James Bottomley]

On Mon, 2010-12-20 at 10:20 -0600, James Bottomley wrote:
> Added cc: linux-scsi
> 
> On Sat, 2010-12-18 at 18:42 +0100, Tejun Heo wrote:
> > Replace sd_media_change() with sd_check_events().
> > 
> > * Move media removed logic into set_media_not_present() and
> >   media_not_present() and set sdev->changed iff an existing media is
> >   removed or the device indicates UNIT_ATTENTION.
> > 
> > * Make sd_check_events() sets sdev->changed if previously missing
> >   media becomes present.
> > 
> > * Event is reported only if sdev->changed is set.
> > 
> > This makes media presence event reported if scsi_disk->media_present
> > actually changed or the device indicated UNIT_ATTENTION.  For backward
> > compatibility, SDEV_EVT_MEDIA_CHANGE is generated each time
> > sd_check_events() detects media change event.
> > 
> > Signed-off-by: Tejun Heo <tj@kernel.org>
> > Cc: Kay Sievers <kay.sievers@vrfy.org>
> > ---
> > Here it is.  The conflicts were due to Alan's recent patch, which was
> > in the similar direction anyway.
> 
> This looks fine to me.  Jens can you strip the SCSI patches out of your
> tree and I'll run them through a postmerge tree to get the fix up?

Ping on this, please: I can't build a postmerge tree until block is
sorted out.  I need these four removing:

commit 638428ece619495edc9579b1e21493eb00f9687c
Author: Tejun Heo <tj@kernel.org>
Date:   Thu Dec 9 11:18:42 2010 +0100

    scsi: fix TUR error handling in sr_media_change()
  
commit 9f8a2c23c6c1140f515f601265c4dff7522110b7
Author: Tejun Heo <tj@kernel.org>
Date:   Wed Dec 8 20:57:40 2010 +0100

    scsi: replace sr_test_unit_ready() with scsi_test_unit_ready()
 
commit 93aae17af1172c40c6f74b7294e93a90c3cfaa5d
Author: Tejun Heo <tj@kernel.org>
Date:   Thu Dec 16 17:52:17 2010 +0100

    sr: implement sr_check_events()

commit c8d2e937355d02db3055c2fc203e5f017297ee1f
Author: Tejun Heo <tj@kernel.org>
Date:   Wed Dec 8 20:57:42 2010 +0100

    sd: implement sd_check_events()

Thanks,

James

Re: [PATCH scsi-misc-2.6] sd: implement sd_check_events()

[Jens Axboe]

On 2010-12-21 19:09, James Bottomley wrote:
> On Mon, 2010-12-20 at 10:20 -0600, James Bottomley wrote:
>> Added cc: linux-scsi
>>
>> On Sat, 2010-12-18 at 18:42 +0100, Tejun Heo wrote:
>>> Replace sd_media_change() with sd_check_events().
>>>
>>> * Move media removed logic into set_media_not_present() and
>>>   media_not_present() and set sdev->changed iff an existing media is
>>>   removed or the device indicates UNIT_ATTENTION.
>>>
>>> * Make sd_check_events() sets sdev->changed if previously missing
>>>   media becomes present.
>>>
>>> * Event is reported only if sdev->changed is set.
>>>
>>> This makes media presence event reported if scsi_disk->media_present
>>> actually changed or the device indicated UNIT_ATTENTION.  For backward
>>> compatibility, SDEV_EVT_MEDIA_CHANGE is generated each time
>>> sd_check_events() detects media change event.
>>>
>>> Signed-off-by: Tejun Heo <tj@kernel.org>
>>> Cc: Kay Sievers <kay.sievers@vrfy.org>
>>> ---
>>> Here it is.  The conflicts were due to Alan's recent patch, which was
>>> in the similar direction anyway.
>>
>> This looks fine to me.  Jens can you strip the SCSI patches out of your
>> tree and I'll run them through a postmerge tree to get the fix up?
> 
> Ping on this, please: I can't build a postmerge tree until block is
> sorted out.  I need these four removing:

I would need to revert those four then, I can't rebase any of those
branches.


-- 
Jens Axboe

Re: [PATCH scsi-misc-2.6] sd: implement sd_check_events()

[James Bottomley]

On Tue, 2010-12-21 at 20:19 +0100, Jens Axboe wrote:
> On 2010-12-21 19:09, James Bottomley wrote:
> > On Mon, 2010-12-20 at 10:20 -0600, James Bottomley wrote:
> >> Added cc: linux-scsi
> >>
> >> On Sat, 2010-12-18 at 18:42 +0100, Tejun Heo wrote:
> >>> Replace sd_media_change() with sd_check_events().
> >>>
> >>> * Move media removed logic into set_media_not_present() and
> >>>   media_not_present() and set sdev->changed iff an existing media is
> >>>   removed or the device indicates UNIT_ATTENTION.
> >>>
> >>> * Make sd_check_events() sets sdev->changed if previously missing
> >>>   media becomes present.
> >>>
> >>> * Event is reported only if sdev->changed is set.
> >>>
> >>> This makes media presence event reported if scsi_disk->media_present
> >>> actually changed or the device indicated UNIT_ATTENTION.  For backward
> >>> compatibility, SDEV_EVT_MEDIA_CHANGE is generated each time
> >>> sd_check_events() detects media change event.
> >>>
> >>> Signed-off-by: Tejun Heo <tj@kernel.org>
> >>> Cc: Kay Sievers <kay.sievers@vrfy.org>
> >>> ---
> >>> Here it is.  The conflicts were due to Alan's recent patch, which was
> >>> in the similar direction anyway.
> >>
> >> This looks fine to me.  Jens can you strip the SCSI patches out of your
> >> tree and I'll run them through a postmerge tree to get the fix up?
> > 
> > Ping on this, please: I can't build a postmerge tree until block is
> > sorted out.  I need these four removing:
> 
> I would need to revert those four then, I can't rebase any of those
> branches.

That's a bit unfortunate.  OK, just revert the sd one then.  Hopefully
we're close enough to the merge window that we won't pick up conflicts
in the others.

James

Re: [PATCH scsi-misc-2.6] sd: implement sd_check_events()

[Jens Axboe]

On 2010-12-21 21:24, James Bottomley wrote:
> On Tue, 2010-12-21 at 20:19 +0100, Jens Axboe wrote:
>> On 2010-12-21 19:09, James Bottomley wrote:
>>> On Mon, 2010-12-20 at 10:20 -0600, James Bottomley wrote:
>>>> Added cc: linux-scsi
>>>>
>>>> On Sat, 2010-12-18 at 18:42 +0100, Tejun Heo wrote:
>>>>> Replace sd_media_change() with sd_check_events().
>>>>>
>>>>> * Move media removed logic into set_media_not_present() and
>>>>>   media_not_present() and set sdev->changed iff an existing media is
>>>>>   removed or the device indicates UNIT_ATTENTION.
>>>>>
>>>>> * Make sd_check_events() sets sdev->changed if previously missing
>>>>>   media becomes present.
>>>>>
>>>>> * Event is reported only if sdev->changed is set.
>>>>>
>>>>> This makes media presence event reported if scsi_disk->media_present
>>>>> actually changed or the device indicated UNIT_ATTENTION.  For backward
>>>>> compatibility, SDEV_EVT_MEDIA_CHANGE is generated each time
>>>>> sd_check_events() detects media change event.
>>>>>
>>>>> Signed-off-by: Tejun Heo <tj@kernel.org>
>>>>> Cc: Kay Sievers <kay.sievers@vrfy.org>
>>>>> ---
>>>>> Here it is.  The conflicts were due to Alan's recent patch, which was
>>>>> in the similar direction anyway.
>>>>
>>>> This looks fine to me.  Jens can you strip the SCSI patches out of your
>>>> tree and I'll run them through a postmerge tree to get the fix up?
>>>
>>> Ping on this, please: I can't build a postmerge tree until block is
>>> sorted out.  I need these four removing:
>>
>> I would need to revert those four then, I can't rebase any of those
>> branches.
> 
> That's a bit unfortunate.  OK, just revert the sd one then.  Hopefully
> we're close enough to the merge window that we won't pick up conflicts
> in the others.

Done, sd patch reverted and pushed out.

-- 
Jens Axboe