* [PATCH 1/8] bnx2fc: Reset max receive frame size during link up
2011-08-30 22:54 [PATCH 0/8] bnx2fc version 1.0.6 Bhanu Prakash Gollapudi
@ 2011-08-30 22:54 ` Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 2/8] bnx2fc: Send solicitation only after vlan discovery is complete Bhanu Prakash Gollapudi
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Bhanu Prakash Gollapudi @ 2011-08-30 22:54 UTC (permalink / raw)
To: JBottomley, linux-scsi; +Cc: michaelc, mchan, nsujir, Bhanu Prakash Gollapudi
If the max receive frame size is changed during link down, the driver uses the
same value after linkup unless it is reset to default.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
---
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 24e7071..6387067 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -863,6 +863,8 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
bnx2fc_link_speed_update(lport);
if (link_possible && !bnx2fc_link_ok(lport)) {
+ /* Reset max recv frame size to default */
+ fc_set_mfs(lport, BNX2FC_MFS);
printk(KERN_ERR "indicate_netevent: ctlr_link_up\n");
fcoe_ctlr_link_up(&interface->ctlr);
} else if (fcoe_ctlr_link_down(&interface->ctlr)) {
--
1.7.0.6
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/8] bnx2fc: Send solicitation only after vlan discovery is complete
2011-08-30 22:54 [PATCH 0/8] bnx2fc version 1.0.6 Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 1/8] bnx2fc: Reset max receive frame size during link up Bhanu Prakash Gollapudi
@ 2011-08-30 22:54 ` Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 3/8] bnx2fc: No abort issued for REC when it times out Bhanu Prakash Gollapudi
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Bhanu Prakash Gollapudi @ 2011-08-30 22:54 UTC (permalink / raw)
To: JBottomley, linux-scsi; +Cc: michaelc, mchan, nsujir, Bhanu Prakash Gollapudi
Link up event is generated to the driver even before vlan discovery has
started. Because of this driver can send discovery solicitation on a stale
vlan. Call fcoe_ctlr_link_up() only when the driver is in enabled state, which
implies the vlan discovery is complete before sending solicitation.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
---
drivers/scsi/bnx2fc/bnx2fc.h | 1 +
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 21 +++++++++++++++++----
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 903e8f6..02535e8 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -224,6 +224,7 @@ struct bnx2fc_interface {
struct fcoe_ctlr ctlr;
u8 vlan_enabled;
int vlan_id;
+ bool enabled;
};
#define bnx2fc_from_ctlr(fip) container_of(fip, struct bnx2fc_interface, ctlr)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 6387067..ba88ddb 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -865,8 +865,11 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
if (link_possible && !bnx2fc_link_ok(lport)) {
/* Reset max recv frame size to default */
fc_set_mfs(lport, BNX2FC_MFS);
- printk(KERN_ERR "indicate_netevent: ctlr_link_up\n");
- fcoe_ctlr_link_up(&interface->ctlr);
+ /*
+ * ctlr link up will only be handled during
+ * enable to avoid sending discovery solicitation
+ * on a stale vlan
+ */
} else if (fcoe_ctlr_link_down(&interface->ctlr)) {
mutex_lock(&lport->lp_mutex);
list_for_each_entry(vport, &lport->vports, list)
@@ -1784,7 +1787,7 @@ static void bnx2fc_start_disc(struct bnx2fc_interface *interface)
lport = interface->ctlr.lp;
BNX2FC_HBA_DBG(lport, "calling fc_fabric_login\n");
- if (!bnx2fc_link_ok(lport)) {
+ if (!bnx2fc_link_ok(lport) && interface->enabled) {
BNX2FC_HBA_DBG(lport, "ctlr_link_up\n");
fcoe_ctlr_link_up(&interface->ctlr);
fc_host_port_type(lport->host) = FC_PORTTYPE_NPORT;
@@ -1866,6 +1869,7 @@ static int bnx2fc_disable(struct net_device *netdev)
rc = -ENODEV;
printk(KERN_ERR PFX "bnx2fc_disable: interface or lport not found\n");
} else {
+ interface->enabled = false;
fcoe_ctlr_link_down(&interface->ctlr);
fcoe_clean_pending_queue(interface->ctlr.lp);
}
@@ -1888,8 +1892,10 @@ static int bnx2fc_enable(struct net_device *netdev)
if (!interface || !interface->ctlr.lp) {
rc = -ENODEV;
printk(KERN_ERR PFX "bnx2fc_enable: interface or lport not found\n");
- } else if (!bnx2fc_link_ok(interface->ctlr.lp))
+ } else if (!bnx2fc_link_ok(interface->ctlr.lp)) {
fcoe_ctlr_link_up(&interface->ctlr);
+ interface->enabled = true;
+ }
mutex_unlock(&bnx2fc_dev_lock);
rtnl_unlock();
@@ -2002,8 +2008,15 @@ static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode)
/* Make this master N_port */
interface->ctlr.lp = lport;
+ if (!bnx2fc_link_ok(lport)) {
+ fcoe_ctlr_link_up(&interface->ctlr);
+ fc_host_port_type(lport->host) = FC_PORTTYPE_NPORT;
+ set_bit(ADAPTER_STATE_READY, &interface->hba->adapter_state);
+ }
+
BNX2FC_HBA_DBG(lport, "create: START DISC\n");
bnx2fc_start_disc(interface);
+ interface->enabled = true;
/*
* Release from kref_init in bnx2fc_interface_setup, on success
* lport should be holding a reference taken in bnx2fc_if_create
--
1.7.0.6
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 3/8] bnx2fc: No abort issued for REC when it times out
2011-08-30 22:54 [PATCH 0/8] bnx2fc version 1.0.6 Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 1/8] bnx2fc: Reset max receive frame size during link up Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 2/8] bnx2fc: Send solicitation only after vlan discovery is complete Bhanu Prakash Gollapudi
@ 2011-08-30 22:54 ` Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 4/8] bnx2fc: Validate vlan id in NETDEV_UNREGISTER handler Bhanu Prakash Gollapudi
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Bhanu Prakash Gollapudi @ 2011-08-30 22:54 UTC (permalink / raw)
To: JBottomley, linux-scsi; +Cc: michaelc, mchan, nsujir, Bhanu Prakash Gollapudi
ABTS was not issued for timed out REC, as REC completion handler exits out if
the IO completed. Check for timed out REC and issue ABTS before proceeding with
further processing in REC completion handler. Also, initialize rec_retry and
srr_retry before starting the IO.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
---
drivers/scsi/bnx2fc/bnx2fc_els.c | 26 ++++++++++++++------------
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 6 ++++--
2 files changed, 18 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c
index d66dcbd..fd382fe 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_els.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_els.c
@@ -391,18 +391,6 @@ void bnx2fc_rec_compl(struct bnx2fc_els_cb_arg *cb_arg)
BNX2FC_IO_DBG(rec_req, "rec_compl: orig xid = 0x%x", orig_io_req->xid);
tgt = orig_io_req->tgt;
- if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags)) {
- BNX2FC_IO_DBG(rec_req, "completed"
- "orig_io - 0x%x\n",
- orig_io_req->xid);
- goto rec_compl_done;
- }
- if (test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
- BNX2FC_IO_DBG(rec_req, "abts in prog "
- "orig_io - 0x%x\n",
- orig_io_req->xid);
- goto rec_compl_done;
- }
/* Handle REC timeout case */
if (test_and_clear_bit(BNX2FC_FLAG_ELS_TIMEOUT, &rec_req->req_flags)) {
BNX2FC_IO_DBG(rec_req, "timed out, abort "
@@ -433,6 +421,20 @@ void bnx2fc_rec_compl(struct bnx2fc_els_cb_arg *cb_arg)
}
goto rec_compl_done;
}
+
+ if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags)) {
+ BNX2FC_IO_DBG(rec_req, "completed"
+ "orig_io - 0x%x\n",
+ orig_io_req->xid);
+ goto rec_compl_done;
+ }
+ if (test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
+ BNX2FC_IO_DBG(rec_req, "abts in prog "
+ "orig_io - 0x%x\n",
+ orig_io_req->xid);
+ goto rec_compl_done;
+ }
+
mp_req = &(rec_req->mp_req);
fc_hdr = &(mp_req->resp_fc_hdr);
resp_len = mp_req->resp_len;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index b241f3d..1923a25 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -1743,11 +1743,13 @@ void bnx2fc_init_task(struct bnx2fc_cmd *io_req,
/* Init state to NORMAL */
task->txwr_rxrd.const_ctx.init_flags |= task_type <<
FCOE_TCE_TX_WR_RX_RD_CONST_TASK_TYPE_SHIFT;
- if (dev_type == TYPE_TAPE)
+ if (dev_type == TYPE_TAPE) {
task->txwr_rxrd.const_ctx.init_flags |=
FCOE_TASK_DEV_TYPE_TAPE <<
FCOE_TCE_TX_WR_RX_RD_CONST_DEV_TYPE_SHIFT;
- else
+ io_req->rec_retry = 0;
+ io_req->rec_retry = 0;
+ } else
task->txwr_rxrd.const_ctx.init_flags |=
FCOE_TASK_DEV_TYPE_DISK <<
FCOE_TCE_TX_WR_RX_RD_CONST_DEV_TYPE_SHIFT;
--
1.7.0.6
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 4/8] bnx2fc: Validate vlan id in NETDEV_UNREGISTER handler
2011-08-30 22:54 [PATCH 0/8] bnx2fc version 1.0.6 Bhanu Prakash Gollapudi
` (2 preceding siblings ...)
2011-08-30 22:54 ` [PATCH 3/8] bnx2fc: No abort issued for REC when it times out Bhanu Prakash Gollapudi
@ 2011-08-30 22:54 ` Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 5/8] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks Bhanu Prakash Gollapudi
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Bhanu Prakash Gollapudi @ 2011-08-30 22:54 UTC (permalink / raw)
To: JBottomley, linux-scsi; +Cc: michaelc, mchan, nsujir, Bhanu Prakash Gollapudi
From: Nithin Nayak Sujir <nsujir@broadcom.com>
When bnx2fc receives an UNREGISTER event on a vlan interface it calls
destroy on all interfaces that matches the physical interface. Add
vlan_id check to destroy only the vlan interface that generated the
event.
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
---
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index ba88ddb..886938d 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -838,9 +838,9 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
return;
mutex_lock(&bnx2fc_dev_lock);
list_for_each_entry_safe(interface, tmp, &if_list, list) {
- if (interface->hba != hba)
- continue;
- __bnx2fc_destroy(interface);
+ if (interface->hba == hba &&
+ interface->vlan_id == (vlan_id & VLAN_VID_MASK))
+ __bnx2fc_destroy(interface);
}
mutex_unlock(&bnx2fc_dev_lock);
return;
--
1.7.0.6
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 5/8] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks
2011-08-30 22:54 [PATCH 0/8] bnx2fc version 1.0.6 Bhanu Prakash Gollapudi
` (3 preceding siblings ...)
2011-08-30 22:54 ` [PATCH 4/8] bnx2fc: Validate vlan id in NETDEV_UNREGISTER handler Bhanu Prakash Gollapudi
@ 2011-08-30 22:54 ` Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 6/8] bnx2fc: Fix panic caused because of incorrect errror handling in create() Bhanu Prakash Gollapudi
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Bhanu Prakash Gollapudi @ 2011-08-30 22:54 UTC (permalink / raw)
To: JBottomley, linux-scsi; +Cc: michaelc, mchan, nsujir, Bhanu Prakash Gollapudi
It is not required to hold rtnl_lock and bnx2fc_dev_lock when calling
bnx2fc_if_destroy, as the locking is only required to serialize creation and
deletion of fcoe instances. More importantly, this unnecessary locking causes
deadlock as bnx2fc_if_destroy calls fc_remove_host holding rtnl_lock.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
---
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 8 ++------
1 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 886938d..a5111f3 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -1487,13 +1487,13 @@ static void bnx2fc_if_destroy(struct fc_lport *lport)
static void __bnx2fc_destroy(struct bnx2fc_interface *interface)
{
struct fc_lport *lport = interface->ctlr.lp;
+ struct fcoe_port *port = lport_priv(lport);
bnx2fc_interface_cleanup(interface);
bnx2fc_stop(interface);
list_del(&interface->list);
- lport = interface->ctlr.lp;
bnx2fc_interface_put(interface);
- bnx2fc_if_destroy(lport);
+ queue_work(bnx2fc_wq, &port->destroy_work);
}
/**
@@ -1541,11 +1541,7 @@ static void bnx2fc_destroy_work(struct work_struct *work)
BNX2FC_HBA_DBG(lport, "Entered bnx2fc_destroy_work\n");
- rtnl_lock();
- mutex_lock(&bnx2fc_dev_lock);
bnx2fc_if_destroy(lport);
- mutex_unlock(&bnx2fc_dev_lock);
- rtnl_unlock();
}
static void bnx2fc_unbind_adapter_devices(struct bnx2fc_hba *hba)
--
1.7.0.6
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 6/8] bnx2fc: Fix panic caused because of incorrect errror handling in create().
2011-08-30 22:54 [PATCH 0/8] bnx2fc version 1.0.6 Bhanu Prakash Gollapudi
` (4 preceding siblings ...)
2011-08-30 22:54 ` [PATCH 5/8] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks Bhanu Prakash Gollapudi
@ 2011-08-30 22:54 ` Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 7/8] bnx2fc: Fix FW assert during RSCN stress tests Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 8/8] bnx2fc: Bumped version to 1.0.6 Bhanu Prakash Gollapudi
7 siblings, 0 replies; 9+ messages in thread
From: Bhanu Prakash Gollapudi @ 2011-08-30 22:54 UTC (permalink / raw)
To: JBottomley, linux-scsi; +Cc: michaelc, mchan, nsujir, Bhanu Prakash Gollapudi
Driver incorrectly calls bnx2fc_interface_cleanup() when bnx2fc_if_create fails
which accesses bad pointer. Handle bnx2fc_if_create failure by directly calling
bnx2fc_net_cleanup.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
---
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 15 ++++++++++-----
1 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index a5111f3..330f9f0 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -1441,6 +1441,14 @@ free_blport:
return NULL;
}
+static void bnx2fc_net_cleanup(struct bnx2fc_interface *interface)
+{
+ /* Dont listen for Ethernet packets anymore */
+ __dev_remove_pack(&interface->fcoe_packet_type);
+ __dev_remove_pack(&interface->fip_packet_type);
+ synchronize_net();
+}
+
static void bnx2fc_interface_cleanup(struct bnx2fc_interface *interface)
{
struct fc_lport *lport = interface->ctlr.lp;
@@ -1453,10 +1461,7 @@ static void bnx2fc_interface_cleanup(struct bnx2fc_interface *interface)
/* Free existing transmit skbs */
fcoe_clean_pending_queue(lport);
- /* Dont listen for Ethernet packets anymore */
- __dev_remove_pack(&interface->fcoe_packet_type);
- __dev_remove_pack(&interface->fip_packet_type);
- synchronize_net();
+ bnx2fc_net_cleanup(interface);
bnx2fc_free_vport(hba, lport);
}
@@ -1991,7 +1996,6 @@ static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode)
if (!lport) {
printk(KERN_ERR PFX "Failed to create interface (%s)\n",
netdev->name);
- bnx2fc_interface_cleanup(interface);
rc = -EINVAL;
goto if_create_err;
}
@@ -2026,6 +2030,7 @@ static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode)
if_create_err:
destroy_workqueue(interface->timer_work_queue);
ifput_err:
+ bnx2fc_net_cleanup(interface);
bnx2fc_interface_put(interface);
netdev_err:
module_put(THIS_MODULE);
--
1.7.0.6
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 7/8] bnx2fc: Fix FW assert during RSCN stress tests
2011-08-30 22:54 [PATCH 0/8] bnx2fc version 1.0.6 Bhanu Prakash Gollapudi
` (5 preceding siblings ...)
2011-08-30 22:54 ` [PATCH 6/8] bnx2fc: Fix panic caused because of incorrect errror handling in create() Bhanu Prakash Gollapudi
@ 2011-08-30 22:54 ` Bhanu Prakash Gollapudi
2011-08-30 22:54 ` [PATCH 8/8] bnx2fc: Bumped version to 1.0.6 Bhanu Prakash Gollapudi
7 siblings, 0 replies; 9+ messages in thread
From: Bhanu Prakash Gollapudi @ 2011-08-30 22:54 UTC (permalink / raw)
To: JBottomley, linux-scsi; +Cc: michaelc, mchan, nsujir, Bhanu Prakash Gollapudi
Firmware asserts when the same CQE is armed twice. This scenario happens during
RSCN stress tests as driver incorrects arms the CQ after the session is
offloaded.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
---
drivers/scsi/bnx2fc/bnx2fc_tgt.c | 4 +---
1 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
index 2138da9..c1800b5 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
@@ -133,9 +133,7 @@ retry_ofld:
printk(KERN_ERR PFX "map doorbell failed - no mem\n");
/* upload will take care of cleaning up sess resc */
lport->tt.rport_logoff(rdata);
- } else
- /* Arm CQ */
- bnx2fc_arm_cq(tgt);
+ }
return;
ofld_err:
--
1.7.0.6
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 8/8] bnx2fc: Bumped version to 1.0.6
2011-08-30 22:54 [PATCH 0/8] bnx2fc version 1.0.6 Bhanu Prakash Gollapudi
` (6 preceding siblings ...)
2011-08-30 22:54 ` [PATCH 7/8] bnx2fc: Fix FW assert during RSCN stress tests Bhanu Prakash Gollapudi
@ 2011-08-30 22:54 ` Bhanu Prakash Gollapudi
7 siblings, 0 replies; 9+ messages in thread
From: Bhanu Prakash Gollapudi @ 2011-08-30 22:54 UTC (permalink / raw)
To: JBottomley, linux-scsi; +Cc: michaelc, mchan, nsujir, Bhanu Prakash Gollapudi
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
---
drivers/scsi/bnx2fc/bnx2fc.h | 2 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 02535e8..8dd5d4a 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -62,7 +62,7 @@
#include "bnx2fc_constants.h"
#define BNX2FC_NAME "bnx2fc"
-#define BNX2FC_VERSION "1.0.5"
+#define BNX2FC_VERSION "1.0.6"
#define PFX "bnx2fc: "
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 330f9f0..eb28446 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -22,7 +22,7 @@ DEFINE_PER_CPU(struct bnx2fc_percpu_s, bnx2fc_percpu);
#define DRV_MODULE_NAME "bnx2fc"
#define DRV_MODULE_VERSION BNX2FC_VERSION
-#define DRV_MODULE_RELDATE "Aug 03, 2011"
+#define DRV_MODULE_RELDATE "Aug 30, 2011"
static char version[] __devinitdata =
--
1.7.0.6
^ permalink raw reply related [flat|nested] 9+ messages in thread