From: Chad Dupuis <chad.dupuis@qlogic.com>
To: jbottomley@parallels.com
Cc: giridhar.malavali@qlogic.com, chad.dupuis@qlogic.com,
andrew.vasquez@qlogic.com, linux-scsi@vger.kernel.org
Subject: [PATCH 00/14] qla2xxx: Patches for 3.2-rc.
Date: Fri, 18 Nov 2011 09:02:08 -0800 [thread overview]
Message-ID: <1321635742-16426-1-git-send-email-chad.dupuis@qlogic.com> (raw)
Hi James,
Please apply the following patches for 3.2-rc.
Thanks,
Chad
Andrew Vasquez (1):
qla2xxx: Return the correct value for a mailbox command if 82xx is in
reset recovery.
Arun Easi (1):
qla2xxx: Check for SCSI status on underruns.
Chad Dupuis (3):
qla2xxx: Display IPE error message for ISP82xx.
qla2xxx: Encapsulate prematurely completing mailbox commands during
ISP82xx firmware hang.
qla2xxx: Update version number to 8.03.07.12-k.
Giridhar Malavali (6):
qla2xxx: Revert back the request queue mapping to request queue 0.
qla2xxx: Stop unconditional completion of mailbox commands issued in
interrupt mode during firmware hang.
qla2xxx: Enable Minidump by default with default capture mask 0x1f.
qla2xxx: Clear mailbox busy flag during premature mailbox completion
for ISP82xx.
qla2xxx: Disable generating pause frames when firmware hang detected
for ISP82xx.
qla2xxx: Submit all chained IOCBs for passthrough commands on request
queue 0.
Saurav Kashyap (3):
qla2xxx: Remove qla2x00_wait_for_loop_ready function.
qla2xxx: Don't call alloc_fw_dump for ISP82XX.
qla2xxx: Correct fc_host port_state display.
drivers/scsi/qla2xxx/qla_attr.c | 27 ++++++++++--
drivers/scsi/qla2xxx/qla_dbg.c | 8 ++--
drivers/scsi/qla2xxx/qla_gbl.h | 1 +
drivers/scsi/qla2xxx/qla_init.c | 3 +-
drivers/scsi/qla2xxx/qla_iocb.c | 14 +++---
drivers/scsi/qla2xxx/qla_isr.c | 2 +-
drivers/scsi/qla2xxx/qla_mbx.c | 25 +++++++++--
drivers/scsi/qla2xxx/qla_nx.c | 42 +++++++++++------
drivers/scsi/qla2xxx/qla_nx.h | 4 ++
drivers/scsi/qla2xxx/qla_os.c | 86 ++++-------------------------------
drivers/scsi/qla2xxx/qla_version.h | 2 +-
11 files changed, 102 insertions(+), 112 deletions(-)
next reply other threads:[~2011-11-18 17:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-18 17:02 Chad Dupuis [this message]
2011-11-18 17:02 ` [PATCH 01/14] qla2xxx: Remove qla2x00_wait_for_loop_ready function Chad Dupuis
2011-11-18 17:02 ` [PATCH 02/14] qla2xxx: Check for SCSI status on underruns Chad Dupuis
2011-11-18 17:02 ` [PATCH 03/14] qla2xxx: Don't call alloc_fw_dump for ISP82XX Chad Dupuis
2011-11-18 17:02 ` [PATCH 04/14] qla2xxx: Revert back the request queue mapping to request queue 0 Chad Dupuis
2011-11-18 17:02 ` [PATCH 05/14] qla2xxx: Stop unconditional completion of mailbox commands issued in interrupt mode during firmware hang Chad Dupuis
2011-11-18 17:02 ` [PATCH 06/14] qla2xxx: Enable Minidump by default with default capture mask 0x1f Chad Dupuis
2011-11-18 17:02 ` [PATCH 07/14] qla2xxx: Return the correct value for a mailbox command if 82xx is in reset recovery Chad Dupuis
2011-11-18 17:02 ` [PATCH 08/14] qla2xxx: Display IPE error message for ISP82xx Chad Dupuis
2011-11-18 17:02 ` [PATCH 09/14] qla2xxx: Encapsulate prematurely completing mailbox commands during ISP82xx firmware hang Chad Dupuis
2011-11-18 17:02 ` [PATCH 10/14] qla2xxx: Clear mailbox busy flag during premature mailbox completion for ISP82xx Chad Dupuis
2011-11-18 17:02 ` [PATCH 11/14] qla2xxx: Disable generating pause frames when firmware hang detected " Chad Dupuis
2011-11-18 17:02 ` [PATCH 12/14] qla2xxx: Correct fc_host port_state display Chad Dupuis
2011-12-12 8:50 ` James Bottomley
2011-12-12 19:31 ` Chad Dupuis
2011-11-18 17:02 ` [PATCH 13/14] qla2xxx: Submit all chained IOCBs for passthrough commands on request queue 0 Chad Dupuis
2011-11-18 17:02 ` [PATCH 14/14] qla2xxx: Update version number to 8.03.07.12-k Chad Dupuis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321635742-16426-1-git-send-email-chad.dupuis@qlogic.com \
--to=chad.dupuis@qlogic.com \
--cc=andrew.vasquez@qlogic.com \
--cc=giridhar.malavali@qlogic.com \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).