From: Chad Dupuis <chad.dupuis@qlogic.com>
To: jbottomley@parallels.com
Cc: giridhar.malavali@qlogic.com, chad.dupuis@qlogic.com,
andrew.vasquez@qlogic.com, linux-scsi@vger.kernel.org
Subject: [PATCH 19/29] qla2xxx: Log messages to use correct vha.
Date: Thu, 9 Feb 2012 11:15:51 -0800 [thread overview]
Message-ID: <1328814961-21866-20-git-send-email-chad.dupuis@qlogic.com> (raw)
In-Reply-To: <1328814961-21866-1-git-send-email-chad.dupuis@qlogic.com>
From: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
---
drivers/scsi/qla2xxx/qla_isr.c | 34 +++++++++++-----------
drivers/scsi/qla2xxx/qla_mbx.c | 60 ++++++++++++++++++++--------------------
2 files changed, 47 insertions(+), 47 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ea6d6b0..32ab837 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1141,7 +1141,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ?
QLA_LOGIO_LOGIN_RETRIED : 0;
if (logio->entry_status) {
- ql_log(ql_log_warn, vha, 0x5034,
+ ql_log(ql_log_warn, fcport->vha, 0x5034,
"Async-%s error entry - hdl=%x"
"portid=%02x%02x%02x entry-status=%x.\n",
type, sp->handle, fcport->d_id.b.domain,
@@ -1154,7 +1154,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
}
if (le16_to_cpu(logio->comp_status) == CS_COMPLETE) {
- ql_dbg(ql_dbg_async, vha, 0x5036,
+ ql_dbg(ql_dbg_async, fcport->vha, 0x5036,
"Async-%s complete - hdl=%x portid=%02x%02x%02x "
"iop0=%x.\n", type, sp->handle, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa,
@@ -1195,7 +1195,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
break;
}
- ql_dbg(ql_dbg_async, vha, 0x5037,
+ ql_dbg(ql_dbg_async, fcport->vha, 0x5037,
"Async-%s failed - hdl=%x portid=%02x%02x%02x comp=%x "
"iop0=%x iop1=%x.\n", type, sp->handle, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa,
@@ -1228,24 +1228,24 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
fcport = sp->fcport;
if (sts->entry_status) {
- ql_log(ql_log_warn, vha, 0x5038,
+ ql_log(ql_log_warn, fcport->vha, 0x5038,
"Async-%s error - hdl=%x entry-status(%x).\n",
type, sp->handle, sts->entry_status);
} else if (sts->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) {
- ql_log(ql_log_warn, vha, 0x5039,
+ ql_log(ql_log_warn, fcport->vha, 0x5039,
"Async-%s error - hdl=%x completion status(%x).\n",
type, sp->handle, sts->comp_status);
} else if (!(le16_to_cpu(sts->scsi_status) &
SS_RESPONSE_INFO_LEN_VALID)) {
- ql_log(ql_log_warn, vha, 0x503a,
+ ql_log(ql_log_warn, fcport->vha, 0x503a,
"Async-%s error - hdl=%x no response info(%x).\n",
type, sp->handle, sts->scsi_status);
} else if (le32_to_cpu(sts->rsp_data_len) < 4) {
- ql_log(ql_log_warn, vha, 0x503b,
+ ql_log(ql_log_warn, fcport->vha, 0x503b,
"Async-%s error - hdl=%x not enough response(%d).\n",
type, sp->handle, sts->rsp_data_len);
} else if (sts->data[3]) {
- ql_log(ql_log_warn, vha, 0x503c,
+ ql_log(ql_log_warn, fcport->vha, 0x503c,
"Async-%s error - hdl=%x response(%x).\n",
type, sp->handle, sts->data[3]);
} else {
@@ -1630,7 +1630,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
par_sense_len -= rsp_info_len;
}
if (rsp_info_len > 3 && rsp_info[3]) {
- ql_dbg(ql_dbg_io, vha, 0x3019,
+ ql_dbg(ql_dbg_io, fcport->vha, 0x3019,
"FCP I/O protocol failure (0x%x/0x%x).\n",
rsp_info_len, rsp_info[3]);
@@ -1661,7 +1661,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
if (!lscsi_status &&
((unsigned)(scsi_bufflen(cp) - resid) <
cp->underflow)) {
- ql_dbg(ql_dbg_io, vha, 0x301a,
+ ql_dbg(ql_dbg_io, fcport->vha, 0x301a,
"Mid-layer underflow "
"detected (0x%x of 0x%x bytes).\n",
resid, scsi_bufflen(cp));
@@ -1673,7 +1673,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
res = DID_OK << 16 | lscsi_status;
if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
- ql_dbg(ql_dbg_io, vha, 0x301b,
+ ql_dbg(ql_dbg_io, fcport->vha, 0x301b,
"QUEUE FULL detected.\n");
break;
}
@@ -1695,7 +1695,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
scsi_set_resid(cp, resid);
if (scsi_status & SS_RESIDUAL_UNDER) {
if (IS_FWI2_CAPABLE(ha) && fw_resid_len != resid_len) {
- ql_dbg(ql_dbg_io, vha, 0x301d,
+ ql_dbg(ql_dbg_io, fcport->vha, 0x301d,
"Dropped frame(s) detected "
"(0x%x of 0x%x bytes).\n",
resid, scsi_bufflen(cp));
@@ -1707,7 +1707,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
if (!lscsi_status &&
((unsigned)(scsi_bufflen(cp) - resid) <
cp->underflow)) {
- ql_dbg(ql_dbg_io, vha, 0x301e,
+ ql_dbg(ql_dbg_io, fcport->vha, 0x301e,
"Mid-layer underflow "
"detected (0x%x of 0x%x bytes).\n",
resid, scsi_bufflen(cp));
@@ -1716,7 +1716,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
break;
}
} else {
- ql_dbg(ql_dbg_io, vha, 0x301f,
+ ql_dbg(ql_dbg_io, fcport->vha, 0x301f,
"Dropped frame(s) detected (0x%x "
"of 0x%x bytes).\n", resid, scsi_bufflen(cp));
@@ -1734,7 +1734,7 @@ check_scsi_status:
*/
if (lscsi_status != 0) {
if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
- ql_dbg(ql_dbg_io, vha, 0x3020,
+ ql_dbg(ql_dbg_io, fcport->vha, 0x3020,
"QUEUE FULL detected.\n");
logit = 1;
break;
@@ -1774,7 +1774,7 @@ check_scsi_status:
break;
}
- ql_dbg(ql_dbg_io, vha, 0x3021,
+ ql_dbg(ql_dbg_io, fcport->vha, 0x3021,
"Port down status: port-state=0x%x.\n",
atomic_read(&fcport->state));
@@ -1796,7 +1796,7 @@ check_scsi_status:
out:
if (logit)
- ql_dbg(ql_dbg_io, vha, 0x3022,
+ ql_dbg(ql_dbg_io, fcport->vha, 0x3022,
"FCP command status: 0x%x-0x%x (0x%x) "
"nexus=%ld:%d:%d portid=%02x%02x%02x oxid=0x%x "
"cdb=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x len=0x%x "
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index bde3eb2..957a4b8 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -46,17 +46,17 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
- ql_dbg(ql_dbg_mbx, base_vha, 0x1000, "Entered %s.\n", __func__);
+ ql_dbg(ql_dbg_mbx, vha, 0x1000, "Entered %s.\n", __func__);
if (ha->pdev->error_state > pci_channel_io_frozen) {
- ql_log(ql_log_warn, base_vha, 0x1001,
+ ql_log(ql_log_warn, vha, 0x1001,
"error_state is greater than pci_channel_io_frozen, "
"exiting.\n");
return QLA_FUNCTION_TIMEOUT;
}
if (vha->device_flags & DFLG_DEV_FAILED) {
- ql_log(ql_log_warn, base_vha, 0x1002,
+ ql_log(ql_log_warn, vha, 0x1002,
"Device in failed state, exiting.\n");
return QLA_FUNCTION_TIMEOUT;
}
@@ -69,7 +69,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
if (ha->flags.pci_channel_io_perm_failure) {
- ql_log(ql_log_warn, base_vha, 0x1003,
+ ql_log(ql_log_warn, vha, 0x1003,
"Perm failure on EEH timeout MBX, exiting.\n");
return QLA_FUNCTION_TIMEOUT;
}
@@ -77,7 +77,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
if (ha->flags.isp82xx_fw_hung) {
/* Setting Link-Down error */
mcp->mb[0] = MBS_LINK_DOWN_ERROR;
- ql_log(ql_log_warn, base_vha, 0x1004,
+ ql_log(ql_log_warn, vha, 0x1004,
"FW hung = %d.\n", ha->flags.isp82xx_fw_hung);
return QLA_FUNCTION_TIMEOUT;
}
@@ -89,7 +89,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
*/
if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) {
/* Timeout occurred. Return error. */
- ql_log(ql_log_warn, base_vha, 0x1005,
+ ql_log(ql_log_warn, vha, 0x1005,
"Cmd access timeout, cmd=0x%x, Exiting.\n",
mcp->mb[0]);
return QLA_FUNCTION_TIMEOUT;
@@ -99,7 +99,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
/* Save mailbox command for debug */
ha->mcp = mcp;
- ql_dbg(ql_dbg_mbx, base_vha, 0x1006,
+ ql_dbg(ql_dbg_mbx, vha, 0x1006,
"Prepare to issue mbox cmd=0x%x.\n", mcp->mb[0]);
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -128,28 +128,28 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
iptr++;
}
- ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1111,
+ ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1111,
"Loaded MBX registers (displayed in bytes) =.\n");
- ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1112,
+ ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1112,
(uint8_t *)mcp->mb, 16);
- ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1113,
+ ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1113,
".\n");
- ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1114,
+ ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1114,
((uint8_t *)mcp->mb + 0x10), 16);
- ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1115,
+ ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1115,
".\n");
- ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1116,
+ ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1116,
((uint8_t *)mcp->mb + 0x20), 8);
- ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1117,
+ ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1117,
"I/O Address = %p.\n", optr);
- ql_dump_regs(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x100e);
+ ql_dump_regs(ql_dbg_mbx + ql_dbg_buffer, vha, 0x100e);
/* Issue set host interrupt command to send cmd out. */
ha->flags.mbox_int = 0;
clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
/* Unlock mbx registers and wait for interrupt */
- ql_dbg(ql_dbg_mbx, base_vha, 0x100f,
+ ql_dbg(ql_dbg_mbx, vha, 0x100f,
"Going to unlock irq & waiting for interrupts. "
"jiffies=%lx.\n", jiffies);
@@ -164,7 +164,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
spin_unlock_irqrestore(&ha->hardware_lock,
flags);
ha->flags.mbox_busy = 0;
- ql_dbg(ql_dbg_mbx, base_vha, 0x1010,
+ ql_dbg(ql_dbg_mbx, vha, 0x1010,
"Pending mailbox timeout, exiting.\n");
rval = QLA_FUNCTION_TIMEOUT;
goto premature_exit;
@@ -181,7 +181,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
} else {
- ql_dbg(ql_dbg_mbx, base_vha, 0x1011,
+ ql_dbg(ql_dbg_mbx, vha, 0x1011,
"Cmd=%x Polling Mode.\n", command);
if (IS_QLA82XX(ha)) {
@@ -190,7 +190,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
spin_unlock_irqrestore(&ha->hardware_lock,
flags);
ha->flags.mbox_busy = 0;
- ql_dbg(ql_dbg_mbx, base_vha, 0x1012,
+ ql_dbg(ql_dbg_mbx, vha, 0x1012,
"Pending mailbox timeout, exiting.\n");
rval = QLA_FUNCTION_TIMEOUT;
goto premature_exit;
@@ -215,7 +215,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
command == MBC_LOAD_RISC_RAM_EXTENDED))
msleep(10);
} /* while */
- ql_dbg(ql_dbg_mbx, base_vha, 0x1013,
+ ql_dbg(ql_dbg_mbx, vha, 0x1013,
"Waited %d sec.\n",
(uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ));
}
@@ -224,7 +224,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
if (ha->flags.mbox_int) {
uint16_t *iptr2;
- ql_dbg(ql_dbg_mbx, base_vha, 0x1014,
+ ql_dbg(ql_dbg_mbx, vha, 0x1014,
"Cmd=%x completed.\n", command);
/* Got interrupt. Clear the flag. */
@@ -237,7 +237,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
mcp->mb[0] = MBS_LINK_DOWN_ERROR;
ha->mcp = NULL;
rval = QLA_FUNCTION_FAILED;
- ql_log(ql_log_warn, base_vha, 0x1015,
+ ql_log(ql_log_warn, vha, 0x1015,
"FW hung = %d.\n", ha->flags.isp82xx_fw_hung);
goto premature_exit;
}
@@ -269,13 +269,13 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
mb0 = RD_MAILBOX_REG(ha, ®->isp, 0);
ictrl = RD_REG_WORD(®->isp.ictrl);
}
- ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1119,
+ ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1119,
"MBX Command timeout for cmd %x.\n", command);
- ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x111a,
+ ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x111a,
"iocontrol=%x jiffies=%lx.\n", ictrl, jiffies);
- ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x111b,
+ ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x111b,
"mb[0] = 0x%x.\n", mb0);
- ql_dump_regs(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1019);
+ ql_dump_regs(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1019);
rval = QLA_FUNCTION_TIMEOUT;
}
@@ -286,7 +286,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
ha->mcp = NULL;
if ((abort_active || !io_lock_on) && !IS_NOPOLLING_TYPE(ha)) {
- ql_dbg(ql_dbg_mbx, base_vha, 0x101a,
+ ql_dbg(ql_dbg_mbx, vha, 0x101a,
"Checking for additional resp interrupt.\n");
/* polling mode for non isp_abort commands. */
@@ -298,7 +298,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
if (!io_lock_on || (mcp->flags & IOCTL_CMD) ||
ha->flags.eeh_busy) {
/* not in dpc. schedule it for dpc to take over. */
- ql_dbg(ql_dbg_mbx, base_vha, 0x101b,
+ ql_dbg(ql_dbg_mbx, vha, 0x101b,
"Timeout, schedule isp_abort_needed.\n");
if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) &&
@@ -323,7 +323,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
}
} else if (!abort_active) {
/* call abort directly since we are in the DPC thread */
- ql_dbg(ql_dbg_mbx, base_vha, 0x101d,
+ ql_dbg(ql_dbg_mbx, vha, 0x101d,
"Timeout, calling abort_isp.\n");
if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) &&
@@ -352,7 +352,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
&vha->dpc_flags);
}
clear_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
- ql_dbg(ql_dbg_mbx, base_vha, 0x101f,
+ ql_dbg(ql_dbg_mbx, vha, 0x101f,
"Finished abort_isp.\n");
goto mbx_done;
}
--
1.6.0.2
next prev parent reply other threads:[~2012-02-09 19:32 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-09 19:15 [PATCH 00/29] qla2xxx: Patches for scsi-misc Chad Dupuis
2012-02-09 19:15 ` [PATCH 01/29] qla2xxx: Enhanced the dump routines to capture multiple request and response queues Chad Dupuis
2012-02-09 19:15 ` [PATCH 02/29] qla2xxx: Enhancements to support ISP83xx Chad Dupuis
2012-02-09 19:15 ` [PATCH 03/29] qla2xxx: Use a valid enode-mac if none defined Chad Dupuis
2012-02-09 19:15 ` [PATCH 04/29] qla2xxx: Consolidation of SRB processing Chad Dupuis
2012-02-09 19:15 ` [PATCH 05/29] qla2xxx: Use consistent DL mask for ELS/CT passthru requests Chad Dupuis
2012-02-09 19:15 ` [PATCH 06/29] qla2xxx: Correct print format for edc ql_log() calls Chad Dupuis
2012-02-09 19:15 ` [PATCH 07/29] qla2xxx: Handle change notifications based on switch scan results Chad Dupuis
2012-02-09 19:15 ` [PATCH 08/29] qla2xxx: Return blank sysfs string on initial get thermal failure Chad Dupuis
2012-02-09 19:15 ` [PATCH 09/29] qla2xxx: Increase speed of flash access in ISP82xx adapters to improve firmware load speed Chad Dupuis
2012-02-09 19:15 ` [PATCH 10/29] qla2xxx: Handle failure cases during fabric_login Chad Dupuis
2012-02-09 19:15 ` [PATCH 11/29] qla2xxx: Perform implicit logout during rport tear-down Chad Dupuis
2012-02-09 19:15 ` [PATCH 12/29] qla2xxx: Prep zero-length BSG data-transfer requests Chad Dupuis
2012-02-09 19:15 ` [PATCH 13/29] qla2xxx: Reduce mbx-command timeout for Login/Logout requests Chad Dupuis
2012-02-09 19:15 ` [PATCH 14/29] qla2xxx: Print mailbox command opcode and return code when a command times out Chad Dupuis
2012-02-09 19:15 ` [PATCH 15/29] qla2xxx: Convert remaining printk's to ql_log format Chad Dupuis
2012-02-09 19:15 ` [PATCH 16/29] qla2xxx: Use ql_log* #define's in ql_log() and ql_log_pci() Chad Dupuis
2012-02-09 19:15 ` [PATCH 17/29] qla2xxx: Fix ql_dbg arguments Chad Dupuis
2012-02-09 19:15 ` [PATCH 18/29] qla2xxx: Add new message when a new loopid is assigned Chad Dupuis
2012-02-09 19:15 ` Chad Dupuis [this message]
2012-02-09 19:15 ` [PATCH 20/29] qla2xxx: Change the log message when previous dump is available to retrieve for ISP82xx Chad Dupuis
2012-02-09 19:15 ` [PATCH 21/29] qla2xxx: Perform firmware dump procedure on mailbox command timeout Chad Dupuis
2012-02-09 19:15 ` [PATCH 22/29] qla2xxx: Update LICENSE.qla2xxx Chad Dupuis
2012-02-09 19:15 ` [PATCH 23/29] qla2xxx: Remove EDC sysfs interface Chad Dupuis
2012-02-09 19:15 ` [PATCH 24/29] qla2xxx: Cache swl during fabric discovery Chad Dupuis
2012-02-09 19:15 ` [PATCH 25/29] qla2xxx: Add ha->max_fibre_devices to keep track of the maximum number of targets Chad Dupuis
2012-02-19 14:33 ` James Bottomley
2012-02-09 19:15 ` [PATCH 26/29] qla2xxx: Handle device mapping changes due to device logout Chad Dupuis
2012-02-09 19:15 ` [PATCH 27/29] qla2xxx: Fix incorrect register access in qla2x00_start_iocbs() Chad Dupuis
2012-02-09 19:16 ` [PATCH 28/29] qla2xxx: Stop iteration after first failure in *_id functions Chad Dupuis
2012-02-09 19:16 ` [PATCH 29/29] qla2xxx: Avoid invalid request queue dereference for bad response packets Chad Dupuis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328814961-21866-20-git-send-email-chad.dupuis@qlogic.com \
--to=chad.dupuis@qlogic.com \
--cc=andrew.vasquez@qlogic.com \
--cc=giridhar.malavali@qlogic.com \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).