linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lin Ming <ming.m.lin@intel.com>
To: Jens Axboe <axboe@kernel.dk>,
	Alan Stern <stern@rowland.harvard.edu>,
	"Rafael J. Wysocki" <rjw@sisk.pl>, Shaohua Li <shli@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-scsi@vger.kernel.org
Subject: [PATCH v5 4/4] [SCSI] sd: change to auto suspend mode
Date: Fri,  6 Jul 2012 12:04:32 +0800	[thread overview]
Message-ID: <1341547472-6863-5-git-send-email-ming.m.lin@intel.com> (raw)
In-Reply-To: <1341547472-6863-1-git-send-email-ming.m.lin@intel.com>

Uses block layer runtime pm helper functions in scsi_runtime_suspend/resume.
Remove scsi_autopm_* from sd open/release path.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
---
 drivers/scsi/scsi_pm.c    |   38 ++++++++++++++++++++++++++++++--------
 drivers/scsi/scsi_sysfs.c |    2 ++
 drivers/scsi/sd.c         |    7 -------
 3 files changed, 32 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index dc0ad85..f0b279a 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -74,6 +74,7 @@ static int scsi_bus_suspend_common(struct device *dev, pm_message_t msg)
 
 static int scsi_bus_resume_common(struct device *dev)
 {
+	struct request_queue *q = NULL;
 	int err = 0;
 
 	/*
@@ -84,14 +85,22 @@ static int scsi_bus_resume_common(struct device *dev)
 	 */
 	pm_runtime_get_sync(dev->parent);
 
-	if (scsi_is_sdev_device(dev))
+	if (scsi_is_sdev_device(dev)) {
+		struct scsi_device *sdev = to_scsi_device(dev);
+		q = sdev->request_queue;
+
+		blk_pre_runtime_resume(q);
 		err = scsi_dev_type_resume(dev);
+	}
 	if (err == 0) {
 		pm_runtime_disable(dev);
 		pm_runtime_set_active(dev);
 		pm_runtime_enable(dev);
 	}
 
+	if (q)
+		blk_post_runtime_resume(q, err);
+
 	pm_runtime_put_sync(dev->parent);
 
 	return err;
@@ -143,10 +152,16 @@ static int scsi_runtime_suspend(struct device *dev)
 
 	dev_dbg(dev, "scsi_runtime_suspend\n");
 	if (scsi_is_sdev_device(dev)) {
+		struct scsi_device *sdev = to_scsi_device(dev);
+		struct request_queue *q = sdev->request_queue;
+
+		err = blk_pre_runtime_suspend(q);
+		if (err)
+			return err;
+
 		err = scsi_dev_type_suspend(dev, PMSG_AUTO_SUSPEND);
-		if (err == -EAGAIN)
-			pm_schedule_suspend(dev, jiffies_to_msecs(
-				round_jiffies_up_relative(HZ/10)));
+
+		blk_post_runtime_suspend(q, err);
 	}
 
 	/* Insert hooks here for targets, hosts, and transport classes */
@@ -159,8 +174,14 @@ static int scsi_runtime_resume(struct device *dev)
 	int err = 0;
 
 	dev_dbg(dev, "scsi_runtime_resume\n");
-	if (scsi_is_sdev_device(dev))
+	if (scsi_is_sdev_device(dev)) {
+		struct scsi_device *sdev = to_scsi_device(dev);
+		struct request_queue *q = sdev->request_queue;
+
+		blk_pre_runtime_resume(q);
 		err = scsi_dev_type_resume(dev);
+		blk_post_runtime_resume(q, err);
+	}
 
 	/* Insert hooks here for targets, hosts, and transport classes */
 
@@ -175,9 +196,10 @@ static int scsi_runtime_idle(struct device *dev)
 
 	/* Insert hooks here for targets, hosts, and transport classes */
 
-	if (scsi_is_sdev_device(dev))
-		err = pm_schedule_suspend(dev, 100);
-	else
+	if (scsi_is_sdev_device(dev)) {
+		pm_runtime_mark_last_busy(dev);
+		err = pm_runtime_autosuspend(dev);
+	} else
 		err = pm_runtime_suspend(dev);
 	return err;
 }
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 04c2a27..1e8975f 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -895,6 +895,8 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
 	 */
 	scsi_autopm_get_device(sdev);
 
+	blk_pm_runtime_init(rq, &sdev->sdev_gendev);
+
 	error = device_add(&sdev->sdev_gendev);
 	if (error) {
 		sdev_printk(KERN_INFO, sdev,
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index ce03a0a..db45bda 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -967,10 +967,6 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
 
 	sdev = sdkp->device;
 
-	retval = scsi_autopm_get_device(sdev);
-	if (retval)
-		goto error_autopm;
-
 	/*
 	 * If the device is in error recovery, wait until it is done.
 	 * If the device is offline, then disallow any access to it.
@@ -1015,8 +1011,6 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
 	return 0;
 
 error_out:
-	scsi_autopm_put_device(sdev);
-error_autopm:
 	scsi_disk_put(sdkp);
 	return retval;	
 }
@@ -1051,7 +1045,6 @@ static int sd_release(struct gendisk *disk, fmode_t mode)
 	 * XXX is followed by a "rmmod sd_mod"?
 	 */
 
-	scsi_autopm_put_device(sdev);
 	scsi_disk_put(sdkp);
 	return 0;
 }
-- 
1.7.10

      parent reply	other threads:[~2012-07-06  4:04 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-06  4:04 [PATCH v5 0/4] block layer runtime pm Lin Ming
2012-07-06  4:04 ` [PATCH v5 1/4] block: add a flag to identify PM request Lin Ming
2012-07-06  4:04 ` [PATCH v5 2/4] block: add runtime pm helpers Lin Ming
2012-07-06  4:04 ` [PATCH v5 3/4] block: implement runtime pm strategy Lin Ming
2012-07-06  5:00   ` James Bottomley
2012-07-06  6:07     ` Lin Ming
2012-07-06  8:05       ` James Bottomley
2012-07-06 14:59         ` Alan Stern
2013-01-14  7:18         ` Aaron Lu
2012-07-06  7:27   ` Matthew Wilcox
2012-07-06 14:21   ` Alan Stern
2012-07-06 14:51     ` Lin Ming
2012-07-06  4:04 ` Lin Ming [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1341547472-6863-5-git-send-email-ming.m.lin@intel.com \
    --to=ming.m.lin@intel.com \
    --cc=axboe@kernel.dk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=rjw@sisk.pl \
    --cc=shli@kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).