From: "Martin K. Petersen" <martin.petersen@oracle.com>
To: linux-scsi@vger.kernel.org
Cc: James.Bottomley@hansenpartnership.com,
"Martin K. Petersen" <martin.petersen@oracle.com>
Subject: [PATCH 3/5] scsi: Disable DIF on Hitachi Ultrastar 15K300
Date: Tue, 28 Aug 2012 14:29:35 -0400 [thread overview]
Message-ID: <1346178577-28628-3-git-send-email-martin.petersen@oracle.com> (raw)
In-Reply-To: <1346178577-28628-1-git-send-email-martin.petersen@oracle.com>
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Hitachi Ultrastar 15K300 is quirky. Disable T10 PI (DIF).
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
---
drivers/scsi/scsi_devinfo.c | 1 +
drivers/scsi/scsi_scan.c | 3 +++
include/scsi/scsi_device.h | 4 ++++
include/scsi/scsi_devinfo.h | 1 +
4 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index cf8dfab..43fca91 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -172,6 +172,7 @@ static struct {
{"HITACHI", "DF400", "*", BLIST_REPORTLUN2},
{"HITACHI", "DF500", "*", BLIST_REPORTLUN2},
{"HITACHI", "DISK-SUBSYSTEM", "*", BLIST_REPORTLUN2},
+ {"HITACHI", "HUS1530", "*", BLIST_NO_DIF},
{"HITACHI", "OPEN-", "*", BLIST_REPORTLUN2},
{"HITACHI", "OP-C-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
{"HITACHI", "3380-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 56a9379..0a224e2 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -911,6 +911,9 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
if (*bflags & BLIST_RETRY_HWERROR)
sdev->retry_hwerror = 1;
+ if (*bflags & BLIST_NO_DIF)
+ sdev->no_dif = 1;
+
transport_configure_device(&sdev->sdev_gendev);
if (sdev->host->hostt->slave_configure) {
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 9895f69..88fae8d 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -156,6 +156,7 @@ struct scsi_device {
unsigned is_visible:1; /* is the device visible in sysfs */
unsigned can_power_off:1; /* Device supports runtime power off */
unsigned wce_default_on:1; /* Cache is ON by default */
+ unsigned no_dif:1; /* T10 PI (DIF) should be disabled */
DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
struct list_head event_list; /* asserted events */
@@ -476,6 +477,9 @@ static inline int scsi_device_enclosure(struct scsi_device *sdev)
static inline int scsi_device_protection(struct scsi_device *sdev)
{
+ if (sdev->no_dif)
+ return 0;
+
return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
}
diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h
index b4ddd3b..cc1f3e7 100644
--- a/include/scsi/scsi_devinfo.h
+++ b/include/scsi/scsi_devinfo.h
@@ -30,4 +30,5 @@
#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */
#define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */
#define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */
+#define BLIST_NO_DIF 0x2000000 /* Disable T10 PI (DIF) */
#endif
--
1.7.7.6
next prev parent reply other threads:[~2012-08-28 18:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-28 18:29 [PATCH 1/5] sd: Avoid remapping bad reference tags Martin K. Petersen
2012-08-28 18:29 ` [PATCH 2/5] sd: Allow protection_type to be overridden Martin K. Petersen
2012-08-28 18:29 ` Martin K. Petersen [this message]
2012-08-28 18:29 ` [PATCH 4/5] mpt2sas: Return the correct sense key for DIF errors Martin K. Petersen
2012-08-29 10:25 ` Reddy, Sreekanth
2012-08-28 18:29 ` [PATCH 5/5] mpt2sas: Add a module parameter that permits overriding protection capabilities Martin K. Petersen
2012-08-29 10:13 ` Reddy, Sreekanth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346178577-28628-3-git-send-email-martin.petersen@oracle.com \
--to=martin.petersen@oracle.com \
--cc=James.Bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).