From: "Jason J. Herne" <hernejj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
pbonzini-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
JBottomley-bzQdu9zFT3WakBO8gow8eQ@public.gmane.org,
stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org,
Elliott-VXdhtT5mjnY@public.gmane.org,
"Jason J. Herne"
<hernejj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH] Try #3: Use SCSI read/write(16) with > 32-bit LBA drives
Date: Wed, 14 Nov 2012 10:39:36 -0500 [thread overview]
Message-ID: <1352907576-29285-1-git-send-email-hernejj@gmail.com> (raw)
From: "Jason J. Herne" <hernejj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Force large capacity (> 0xFFFFFFFF blocks) drives to use READ/WRITE(16) instead
of READ/WRITE(10). Some(most/all?) USB enclosures do not like READ(10) commands
when a large capacity drive is installed.
Signed-off-by: Jason J. Herne <hernejj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/scsi/sd.c | 5 ++++-
include/scsi/scsi_device.h | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 12f6fdf..f7913c0 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -887,7 +887,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
- } else if (block > 0xffffffff) {
+ } else if (sdp->use_16_for_rw) {
SCpnt->cmnd[0] += READ_16 - READ_6;
SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
@@ -2054,6 +2054,9 @@ got_data:
}
}
+ /* Use read/write(16) for > 32-bit LBA disks */
+ sdp->use_16_for_rw = (sdkp->capacity > 0xffffffff);
+
/* Rescale capacity to 512-byte units */
if (sector_size == 4096)
sdkp->capacity <<= 3;
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 88fae8d..19ab8f1 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -135,6 +135,7 @@ struct scsi_device {
* because we did a bus reset. */
unsigned use_10_for_rw:1; /* first try 10-byte read / write */
unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
+ unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
unsigned skip_vpd_pages:1; /* do not read VPD pages */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2012-11-14 15:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-14 15:39 Jason J. Herne [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-11-14 22:03 [PATCH] Try #3: Use SCSI read/write(16) with > 32-bit LBA drives Jason J. Herne
[not found] ` <1352930602-3505-1-git-send-email-hernejj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-11-14 22:22 ` Sergei Shtylyov
[not found] ` <50A419B6.4070605-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2012-11-15 1:06 ` Jason J. Herne
2012-11-15 5:50 ` Felipe Balbi
2012-11-15 9:20 ` Christoph Hellwig
[not found] ` <20121115092051.GA16140-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2012-11-15 14:26 ` Jason J. Herne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352907576-29285-1-git-send-email-hernejj@gmail.com \
--to=hernejj-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=Elliott-VXdhtT5mjnY@public.gmane.org \
--cc=JBottomley-bzQdu9zFT3WakBO8gow8eQ@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pbonzini-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).