From: Saurav Kashyap <saurav.kashyap@qlogic.com>
To: jbottomley@parallels.com
Cc: giridhar.malavali@qlogic.com, saurav.kashyap@qlogic.com,
chad.dupuis@qlogic.com, andrew.vasquez@qlogic.com,
linux-scsi@vger.kernel.org
Subject: [PATCH 00/19] qla2xxx: Patches for scsi "misc" branch.
Date: Wed, 21 Nov 2012 02:40:25 -0500 [thread overview]
Message-ID: <1353483644-17262-1-git-send-email-saurav.kashyap@qlogic.com> (raw)
From: Saurav Kashyap <saurav.kashyap@qlogic.com>
Hi James,
Please apply the following patches to the scsi tree at your earliest
convenience for inclusion in the next mainline merge window.
Thanks,
~Saurav
Andrew Vasquez (2):
qla2xxx: Clear unsupported 'states' during Get-FW-State queries.
qla2xxx: Use correct Request-Q-Out register during bidirectional
request processing
Armen Baloyan (1):
qla2xxx: No fcport FC-4 type assignment in GA_NXT response.
Chad Dupuis (3):
qla2xxx: Remove spurious taking of ha->vport_slock spinlock.
qla2xxx: Move noisy Start scsi failed messages to verbose logging
level.
qla2xxx: Update ql2xextended_error_logging parameter description with
new option.
Joe Carnuccio (4):
qla2xxx: Add acquiring of risc semaphore before doing ISP reset.
qla2xxx: Move marking fcport online ahead of setting iiDMA speed.
qla2xxx: Add 16Gb/s case to get port speed capability.
qla2xxx: Parameterize the link speed of hba rather than fcport.
Masanari Iida (1):
qla2xxx: Fix typo in qla2xxx driver.
Saurav Kashyap (8):
qla2xxx: Honor status value of 2 for report-id acquisition.
qla2xxx: Fix for warnings reported by sparse.
qla2xxx: Fix coccinelle warnings in qla2x00_relogin.
qla2xxx: Add Gen3 PCIe speed 8GT/s to the log message.
qla2xxx: Fix typo in qla83xx_fw_dump function.
qla2xxx: Ignore driver ack bit if corresponding presence bit is not
set.
qla2xxx: Dont clear drv active on iospace config failure.
qla2xxx: Display that driver is operating in legacy interrupt mode.
drivers/scsi/qla2xxx/qla_dbg.c | 8 +-
drivers/scsi/qla2xxx/qla_def.h | 4 +-
drivers/scsi/qla2xxx/qla_fw.h | 21 +++++
drivers/scsi/qla2xxx/qla_gbl.h | 3 +-
drivers/scsi/qla2xxx/qla_gs.c | 6 ++
drivers/scsi/qla2xxx/qla_init.c | 153 ++++++++++++++++++++++---------------
drivers/scsi/qla2xxx/qla_iocb.c | 15 +---
drivers/scsi/qla2xxx/qla_isr.c | 42 +++++-----
drivers/scsi/qla2xxx/qla_mbx.c | 6 +-
drivers/scsi/qla2xxx/qla_nx.c | 83 ++++++++-------------
drivers/scsi/qla2xxx/qla_os.c | 50 ++++++++-----
drivers/scsi/qla2xxx/qla_target.c | 2 +-
12 files changed, 214 insertions(+), 179 deletions(-)
--
1.7.7
next reply other threads:[~2012-11-21 7:58 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-21 7:40 Saurav Kashyap [this message]
2012-11-21 7:40 ` [PATCH 01/19] qla2xxx: Clear unsupported 'states' during Get-FW-State queries Saurav Kashyap
2012-11-21 7:40 ` [PATCH 02/19] qla2xxx: Remove spurious taking of ha->vport_slock spinlock Saurav Kashyap
2012-11-21 7:40 ` [PATCH 03/19] qla2xxx: Honor status value of 2 for report-id acquisition Saurav Kashyap
2012-11-21 7:40 ` [PATCH 04/19] qla2xxx: Fix for warnings reported by sparse Saurav Kashyap
2012-11-21 7:40 ` [PATCH 05/19] qla2xxx: No fcport FC-4 type assignment in GA_NXT response Saurav Kashyap
2012-11-21 7:40 ` [PATCH 06/19] qla2xxx: Fix coccinelle warnings in qla2x00_relogin Saurav Kashyap
2012-11-21 7:40 ` [PATCH 07/19] qla2xxx: Move noisy Start scsi failed messages to verbose logging level Saurav Kashyap
2012-11-21 7:40 ` [PATCH 08/19] qla2xxx: Use correct Request-Q-Out register during bidirectional request processing Saurav Kashyap
2012-11-21 7:40 ` [PATCH 09/19] qla2xxx: Add Gen3 PCIe speed 8GT/s to the log message Saurav Kashyap
2012-11-21 7:40 ` [PATCH 10/19] qla2xxx: Fix typo in qla83xx_fw_dump function Saurav Kashyap
2012-11-21 7:40 ` [PATCH 11/19] qla2xxx: Ignore driver ack bit if corresponding presence bit is not set Saurav Kashyap
2012-11-21 7:40 ` [PATCH 12/19] qla2xxx: Add acquiring of risc semaphore before doing ISP reset Saurav Kashyap
2012-11-21 7:40 ` [PATCH 13/19] qla2xxx: Move marking fcport online ahead of setting iiDMA speed Saurav Kashyap
2012-11-21 7:40 ` [PATCH 14/19] qla2xxx: Add 16Gb/s case to get port speed capability Saurav Kashyap
2012-11-21 7:40 ` [PATCH 15/19] qla2xxx: Parameterize the link speed of hba rather than fcport Saurav Kashyap
2012-11-21 7:40 ` [PATCH 16/19] qla2xxx: Update ql2xextended_error_logging parameter description with new option Saurav Kashyap
2012-11-21 7:40 ` [PATCH 17/19] qla2xxx: Fix typo in qla2xxx driver Saurav Kashyap
2012-11-21 7:40 ` [PATCH 18/19] qla2xxx: Dont clear drv active on iospace config failure Saurav Kashyap
2012-11-21 7:40 ` [PATCH 19/19] qla2xxx: Display that driver is operating in legacy interrupt mode Saurav Kashyap
-- strict thread matches above, loose matches on Subject: below --
2016-07-06 15:14 [PATCH 00/19] qla2xxx: Patches for scsi "misc" branch Himanshu Madhani
2016-07-15 19:39 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353483644-17262-1-git-send-email-saurav.kashyap@qlogic.com \
--to=saurav.kashyap@qlogic.com \
--cc=andrew.vasquez@qlogic.com \
--cc=chad.dupuis@qlogic.com \
--cc=giridhar.malavali@qlogic.com \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).