From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thadeu Lima de Souza Cascardo Subject: [PATCH] cxgb4i: Remove the scsi host device when removing device Date: Fri, 11 Jan 2013 17:12:09 -0200 Message-ID: <1357931529-10248-1-git-send-email-cascardo@linux.vnet.ibm.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-scsi@vger.kernel.org Cc: michaelc@cs.wisc.edu, JBottomley@parallels.com, linux-kernel@vger.kernel.org, kxie@chelsio.com, Thadeu Lima de Souza Cascardo , Divy La Rey List-Id: linux-scsi@vger.kernel.org When doing a hotplug remove of a cxgb4 device, there are still dandling symlinks at /sys/class/scsi_host/hostX to the removed PCI device. The upper layer device may also try to send data, which may crash the system. The DETACH message from the lower level driver is sent to the ULD when the device is removed, when the scsi host should be removed from the system, avoiding any problems. After this patch, there are no more dangling symlinks and many attempts to crash the system while there is SCSI activity and removing the device have failed. Adding the device back again works as expected, with the scsi hosts showing up again. Based on a patch by Karen Xie. Cc: Karen Xie Cc: Divy La Rey Signed-off-by: Thadeu Lima de Souza Cascardo --- drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c index f924b3c..3fecf35 100644 --- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c +++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c @@ -1564,6 +1564,7 @@ static int t4_uld_state_change(void *handle, enum cxgb4_state state) break; case CXGB4_STATE_DETACH: pr_info("cdev 0x%p, DETACH.\n", cdev); + cxgbi_device_unregister(cdev); break; default: pr_info("cdev 0x%p, unknown state %d.\n", cdev, state); -- 1.7.1