linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Ewan D. Milne" <emilne@redhat.com>
To: linux-scsi@vger.kernel.org
Subject: [PATCH RFC 9/9] [SCSI] Streamline detection of FM/EOM/ILI status
Date: Fri, 18 Jan 2013 11:27:14 -0500	[thread overview]
Message-ID: <1358526434-1173-10-git-send-email-emilne@redhat.com> (raw)
In-Reply-To: <1358526434-1173-1-git-send-email-emilne@redhat.com>

From: "Ewan D. Milne" <emilne@redhat.com>

Avoid duplicate tests when examining sense data for FM/EOM/ILI
bits.  Moved extraction of status to scsi_normalize_sense() if
the config option CONFIG_SCSI_ENHANCED_UA is used, because
descriptor format sense data is already being parsed there.

Signed-off-by: Ewan D. Milne <emilne@redhat.com>
---
 drivers/scsi/scsi_error.c | 13 +++++++++++++
 include/scsi/scsi_eh.h    |  3 +++
 2 files changed, 16 insertions(+)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 3aa8706..c6344ef 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -332,6 +332,10 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 	 * Previous logic looked for FILEMARK, EOM or ILI which are
 	 * mainly associated with tapes and returned SUCCESS.
 	 */
+#ifdef CONFIG_SCSI_ENHANCED_UA
+	if (sshdr.fm_eom_ili)
+		return SUCCESS;
+#else
 	if (sshdr.response_code == 0x70) {
 		/* fixed format */
 		if (scmd->sense_buffer[2] & 0xe0)
@@ -347,6 +351,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 		    (scmd->sense_buffer[11] & 0xe0))
 			return SUCCESS;
 	}
+#endif
 
 	switch (sshdr.sense_key) {
 	case NO_SENSE:
@@ -2192,6 +2197,11 @@ int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
 				    ((sense_buffer[desc_pos + 4] & 0x01) != 0))
 					sshdr->ua_queue_overflow = 1;
 
+				if ((desc_type == 0x04) && (desc_len >= 4) &&
+				    (addl_len >= 2) &&
+				    ((sense_buffer[desc_pos + 3] & 0xe0) != 0))
+					sshdr->fm_eom_ili = 1;
+
 				if (addl_len > (desc_len - 2))
 					addl_len = desc_len - 2;
 
@@ -2205,6 +2215,9 @@ int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
 		 * fixed format
 		 */
 		if (sb_len > 2) {
+#ifdef CONFIG_SCSI_ENHANCED_UA
+			sshdr->fm_eom_ili = ((sense_buffer[2] & 0xe0) != 0);
+#endif
 			sshdr->overflow = ((sense_buffer[2] & 0x10) != 0);
 			sshdr->sense_key = (sense_buffer[2] & 0xf);
 		}
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index dc6dcfe..136dc71 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -28,6 +28,9 @@ struct scsi_sense_hdr {		/* See SPC-3 section 4.5 */
 	unsigned int overflow:1;	/* sense data overflow */
 #ifdef CONFIG_SCSI_ENHANCED_UA
 	unsigned int ua_queue_overflow:1;	/* UA info lost by device */
+
+	unsigned int fm_eom_ili:1;	/* filemark, end of medium, or
+					   incorrect length indicator set */
 #endif
 };
 
-- 
1.7.11.7


  parent reply	other threads:[~2013-01-18 16:27 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-18 16:27 [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling Ewan D. Milne
2013-01-18 16:27 ` [PATCH RFC 1/9] [SCSI] Detect overflow of sense data buffer Ewan D. Milne
2013-01-18 16:46   ` James Bottomley
2013-01-21  7:26     ` Hannes Reinecke
2013-01-21  8:58       ` James Bottomley
2013-01-21 17:42       ` Douglas Gilbert
2013-01-22 15:10       ` Ewan Milne
2013-01-23  7:16         ` Hannes Reinecke
2013-01-22 15:08     ` Ewan Milne
2013-01-23 10:44       ` Hannes Reinecke
2013-01-23 13:06       ` James Bottomley
2013-01-23 21:21         ` Ewan Milne
2013-01-18 16:27 ` [PATCH RFC 2/9] [SCSI] Generate uevent on sd capacity change Ewan D. Milne
2013-01-18 16:27 ` [PATCH RFC 3/9] [SCSI] Add a kernel config option for enhanced Unit Attention support Ewan D. Milne
2013-01-18 16:27 ` [PATCH RFC 4/9] [SCSI] Rename scsi_evt_xxx to sdev_evt_xxx and scsi_event to sdev_event Ewan D. Milne
2013-01-22 17:33   ` Bart Van Assche
2013-01-23 21:08     ` Ewan Milne
2013-01-22 17:38   ` Bart Van Assche
2013-01-23 20:39     ` Ewan Milne
2013-01-18 16:27 ` [PATCH RFC 5/9] [SCSI] Add support for scsi_target events Ewan D. Milne
2013-01-18 16:27 ` [PATCH RFC 6/9] [SCSI] Generate uevents for certain Unit Attention codes Ewan D. Milne
2013-01-18 16:27 ` [PATCH RFC 7/9] [SCSI] Add sysfs support for enhanced Unit Attention handling Ewan D. Milne
2013-01-18 16:27 ` [PATCH RFC 8/9] [SCSI] Add sense and Unit Attention generation to scsi_debug Ewan D. Milne
2013-01-19 18:43   ` Douglas Gilbert
2013-01-22 15:12     ` Ewan Milne
2013-01-18 16:27 ` Ewan D. Milne [this message]
2013-01-24  0:19 ` [PATCH RFC 0/9] [SCSI] Enhanced sense and Unit Attention handling Bart Van Assche
2013-01-24 11:38   ` Hannes Reinecke
2013-01-24 14:00     ` Ewan Milne
2013-01-24 14:01     ` Mike Christie
2013-01-24 22:02       ` Ewan Milne
2013-01-24 22:47         ` Mike Christie
2013-01-24 14:38     ` Bart Van Assche
2013-01-24 14:51       ` Hannes Reinecke
2013-01-24 15:00         ` Mike Christie
2013-01-24 15:15           ` Hannes Reinecke
2013-01-24 22:00             ` Ewan Milne
2013-01-26 18:20             ` Mike Christie
2013-01-28  6:56               ` Hannes Reinecke
2013-01-28 15:05       ` Jeremy Linton
2013-01-28 15:44         ` Bart Van Assche
2013-01-28 15:48           ` Hannes Reinecke
2013-01-28 20:26             ` James Bottomley
2013-01-28 15:52           ` Jeremy Linton
2013-01-28 16:04             ` Ewan Milne
2013-01-28 16:18             ` Mike Christie
2013-01-29  5:01         ` Shyam_Iyer
2013-01-24 13:53   ` Ewan Milne
2013-01-31 16:27 ` Ewan Milne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1358526434-1173-10-git-send-email-emilne@redhat.com \
    --to=emilne@redhat.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).