From: "Ewan D. Milne" <emilne@redhat.com>
To: linux-scsi@vger.kernel.org
Subject: [PATCH v2 8/8] [SCSI] Streamline detection of FM/EOM/ILI status
Date: Fri, 1 Feb 2013 12:53:15 -0500 [thread overview]
Message-ID: <1359741195-2641-9-git-send-email-emilne@redhat.com> (raw)
In-Reply-To: <1359741195-2641-1-git-send-email-emilne@redhat.com>
From: "Ewan D. Milne" <emilne@redhat.com>
Avoid duplicate tests when examining sense data for FM/EOM/ILI
bits. Moved extraction of status to scsi_normalize_sense() if
the config option CONFIG_SCSI_ENHANCED_UA is used, because
descriptor format sense data is already being parsed there.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
---
drivers/scsi/scsi_error.c | 16 +++++++++++++++-
include/scsi/scsi_eh.h | 3 +++
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index d0b5a26..3ad001e 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -340,6 +340,10 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
* Previous logic looked for FILEMARK, EOM or ILI which are
* mainly associated with tapes and returned SUCCESS.
*/
+#ifdef CONFIG_SCSI_ENHANCED_UA
+ if (sshdr.fm_eom_ili)
+ return SUCCESS;
+#else
if (sshdr.response_code == 0x70) {
/* fixed format */
if (scmd->sense_buffer[2] & 0xe0)
@@ -355,6 +359,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
(scmd->sense_buffer[11] & 0xe0))
return SUCCESS;
}
+#endif
switch (sshdr.sense_key) {
case NO_SENSE:
@@ -2198,6 +2203,11 @@ int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
((sense_buffer[desc_pos + 4] & 0x01) != 0))
sshdr->ua_queue_overflow = 1;
+ if ((desc_type == 0x04) && (desc_len >= 4) &&
+ (addl_len >= 2) &&
+ ((sense_buffer[desc_pos + 3] & 0xe0) != 0))
+ sshdr->fm_eom_ili = 1;
+
if (addl_len > (desc_len - 2))
addl_len = desc_len - 2;
@@ -2210,8 +2220,12 @@ int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
/*
* fixed format
*/
- if (sb_len > 2)
+ if (sb_len > 2) {
+#ifdef CONFIG_SCSI_ENHANCED_UA
+ sshdr->fm_eom_ili = ((sense_buffer[2] & 0xe0) != 0);
+#endif
sshdr->sense_key = (sense_buffer[2] & 0xf);
+ }
if (sb_len > 7) {
sb_len = (sb_len < (sense_buffer[7] + 8)) ?
sb_len : (sense_buffer[7] + 8);
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index b6c4d3d..d53a1d2 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -27,6 +27,9 @@ struct scsi_sense_hdr { /* See SPC-3 section 4.5 */
u8 additional_length; /* always 0 for fixed sense format */
#ifdef CONFIG_SCSI_ENHANCED_UA
unsigned int ua_queue_overflow:1; /* UA info lost by device */
+
+ unsigned int fm_eom_ili:1; /* filemark, end of medium, or
+ incorrect length indicator set */
#endif
};
--
1.7.11.7
next prev parent reply other threads:[~2013-02-01 17:53 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-01 17:53 [PATCH v2 0/8] [SCSI] Enhanced sense and Unit Attention handling Ewan D. Milne
2013-02-01 17:53 ` [PATCH v2 1/8] [SCSI] Generate uevent on sd capacity change Ewan D. Milne
2013-02-01 17:53 ` [PATCH v2 2/8] [SCSI] Add a kernel config option for enhanced Unit Attention support Ewan D. Milne
2013-02-01 17:53 ` [PATCH v2 3/8] [SCSI] Rename scsi_evt_xxx to sdev_evt_xxx and scsi_event to sdev_event Ewan D. Milne
2013-02-01 17:53 ` [PATCH v2 4/8] [SCSI] Add support for scsi_target events Ewan D. Milne
2013-02-01 17:53 ` [PATCH v2 5/8] [SCSI] Generate uevents for certain Unit Attention codes Ewan D. Milne
2013-02-01 17:53 ` [PATCH v2 6/8] [SCSI] Add sysfs support for enhanced Unit Attention handling Ewan D. Milne
2013-02-01 17:53 ` [PATCH v2 7/8] [SCSI] Add sense and Unit Attention generation to scsi_debug Ewan D. Milne
2013-02-01 17:53 ` Ewan D. Milne [this message]
2013-04-11 21:52 ` [PATCH v2 0/8] [SCSI] Enhanced sense and Unit Attention handling Jeremy Linton
2013-04-15 14:13 ` Ewan Milne
2013-04-15 16:20 ` Jeremy Linton
2013-04-15 16:51 ` Ewan Milne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359741195-2641-9-git-send-email-emilne@redhat.com \
--to=emilne@redhat.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).