[PATCH V6 Resend2 1/2] [SCSI] ufs: Add Platform glue driver for ufshcd

[PATCH V6 Resend2 1/2] [SCSI] ufs: Add Platform glue driver for ufshcd

[Vinayak Holikatti]

This patch adds Platform glue driver for ufshcd.

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Tested-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com>
---
 drivers/scsi/ufs/Kconfig         |   11 ++
 drivers/scsi/ufs/Makefile        |    1 +
 drivers/scsi/ufs/ufshcd-pltfrm.c |  217 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 229 insertions(+), 0 deletions(-)
 create mode 100644 drivers/scsi/ufs/ufshcd-pltfrm.c

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 0371047..35faf24 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -57,3 +57,14 @@ config SCSI_UFSHCD_PCI
 	  If you have a controller with this interface, say Y or M here.
 
 	  If unsure, say N.
+
+config SCSI_UFSHCD_PLATFORM
+	tristate "Platform bus based UFS Controller support"
+	depends on SCSI_UFSHCD
+	---help---
+	This selects the UFS host controller support. Select this if
+	you have an UFS controller on Platform bus.
+
+	If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 9eda0df..1e5bd48 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,3 +1,4 @@
 # UFSHCD makefile
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
+obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
new file mode 100644
index 0000000..03319ac
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -0,0 +1,217 @@
+/*
+ * Universal Flash Storage Host controller Platform bus based glue driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd-pltfrm.c
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ *	Santosh Yaraganavi <santosh.sy@samsung.com>
+ *	Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#include "ufshcd.h"
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_PM
+/**
+ * ufshcd_pltfrm_suspend - suspend power management function
+ * @dev: pointer to device handle
+ *
+ *
+ * Returns 0
+ */
+static int ufshcd_pltfrm_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ufs_hba *hba =  platform_get_drvdata(pdev);
+
+	/*
+	 * TODO:
+	 * 1. Call ufshcd_suspend
+	 * 2. Do bus specific power management
+	 */
+
+	disable_irq(hba->irq);
+
+	return 0;
+}
+
+/**
+ * ufshcd_pltfrm_resume - resume power management function
+ * @dev: pointer to device handle
+ *
+ * Returns 0
+ */
+static int ufshcd_pltfrm_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ufs_hba *hba =  platform_get_drvdata(pdev);
+
+	/*
+	 * TODO:
+	 * 1. Call ufshcd_resume.
+	 * 2. Do bus specific wake up
+	 */
+
+	enable_irq(hba->irq);
+
+	return 0;
+}
+#else
+#define ufshcd_pltfrm_suspend	NULL
+#define ufshcd_pltfrm_resume	NULL
+#endif
+
+/**
+ * ufshcd_pltfrm_probe - probe routine of the driver
+ * @pdev: pointer to Platform device handle
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_pltfrm_probe(struct platform_device *pdev)
+{
+	struct ufs_hba *hba;
+	void __iomem *mmio_base;
+	struct resource *mem_res;
+	struct resource *irq_res;
+	resource_size_t mem_size;
+	int err;
+	struct device *dev = &pdev->dev;
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev,
+			"Memory resource not available\n");
+		err = -ENODEV;
+		goto out_error;
+	}
+
+	mem_size = resource_size(mem_res);
+	if (!request_mem_region(mem_res->start, mem_size, "ufshcd")) {
+		dev_err(&pdev->dev,
+			"Cannot reserve the memory resource\n");
+		err = -EBUSY;
+		goto out_error;
+	}
+
+	mmio_base = ioremap_nocache(mem_res->start, mem_size);
+	if (!mmio_base) {
+		dev_err(&pdev->dev, "memory map failed\n");
+		err = -ENOMEM;
+		goto out_release_regions;
+	}
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq_res) {
+		dev_err(&pdev->dev, "IRQ resource not available\n");
+		err = -ENODEV;
+		goto out_iounmap;
+	}
+
+	err = dma_set_coherent_mask(dev, dev->coherent_dma_mask);
+	if (err) {
+		dev_err(&pdev->dev, "set dma mask failed\n");
+		goto out_iounmap;
+	}
+
+	err = ufshcd_init(&pdev->dev, &hba, mmio_base, irq_res->start);
+	if (err) {
+		dev_err(&pdev->dev, "Intialization failed\n");
+		goto out_iounmap;
+	}
+
+	platform_set_drvdata(pdev, hba);
+
+	return 0;
+
+out_iounmap:
+	iounmap(mmio_base);
+out_release_regions:
+	release_mem_region(mem_res->start, mem_size);
+out_error:
+	return err;
+}
+
+/**
+ * ufshcd_pltfrm_remove - remove platform driver routine
+ * @pdev: pointer to platform device handle
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_pltfrm_remove(struct platform_device *pdev)
+{
+	struct resource *mem_res;
+	resource_size_t mem_size;
+	struct ufs_hba *hba =  platform_get_drvdata(pdev);
+
+	disable_irq(hba->irq);
+
+	/* Some buggy controllers raise interrupt after
+	 * the resources are removed. So first we unregister the
+	 * irq handler and then the resources used by driver
+	 */
+
+	free_irq(hba->irq, hba);
+	ufshcd_remove(hba);
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res)
+		dev_err(&pdev->dev, "ufshcd: Memory resource not available\n");
+	else {
+		mem_size = resource_size(mem_res);
+		release_mem_region(mem_res->start, mem_size);
+	}
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static const struct of_device_id ufs_of_match[] = {
+	{ .compatible = "jedec,ufs-1.1"},
+};
+
+static const struct dev_pm_ops ufshcd_dev_pm_ops = {
+	.suspend	= ufshcd_pltfrm_suspend,
+	.resume		= ufshcd_pltfrm_resume,
+};
+
+static struct platform_driver ufshcd_pltfrm_driver = {
+	.probe	= ufshcd_pltfrm_probe,
+	.remove	= ufshcd_pltfrm_remove,
+	.driver	= {
+		.name	= "ufshcd",
+		.owner	= THIS_MODULE,
+		.pm	= &ufshcd_dev_pm_ops,
+		.of_match_table = ufs_of_match,
+	},
+};
+
+module_platform_driver(ufshcd_pltfrm_driver);
+
+MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
+MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
+MODULE_DESCRIPTION("UFS host controller Pltform bus based glue driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(UFSHCD_DRIVER_VERSION);
-- 
1.7.5.4

[PATCH V6 Resend2 2/2] [SCSI] ufs: Correct the expected data transfersize

[Vinayak Holikatti]

This patch corrects the expected data transfer size of the
command UPIU. The current implementation of cmd->transfersize
is wrong as it probably equal to sector size. With this
implementation the transfer size is updated correctly

Reported-by: KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Tested-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com>
Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com>
---
 drivers/scsi/ufs/ufshcd.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 60fd40c..c32a478 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -478,7 +478,7 @@ static void ufshcd_compose_upiu(struct ufshcd_lrb *lrbp)
 		ucd_cmd_ptr->header.dword_2 = 0;
 
 		ucd_cmd_ptr->exp_data_transfer_len =
-			cpu_to_be32(lrbp->cmd->transfersize);
+			cpu_to_be32(lrbp->cmd->sdb.length);
 
 		memcpy(ucd_cmd_ptr->cdb,
 		       lrbp->cmd->cmnd,
-- 
1.7.5.4

Re: [PATCH V6 Resend2 1/2] [SCSI] ufs: Add Platform glue driver for ufshcd

[merez]

Hi James,

Can this patch be poushed to 3.9+ merge window?

Thnaks,
Maya
> This patch adds Platform glue driver for ufshcd.
>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
> Reviewed-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
> Tested-by: Maya Erez <merez@codeaurora.org>
> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com>
> Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com>
> ---
>  drivers/scsi/ufs/Kconfig         |   11 ++
>  drivers/scsi/ufs/Makefile        |    1 +
>  drivers/scsi/ufs/ufshcd-pltfrm.c |  217
> ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 229 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/scsi/ufs/ufshcd-pltfrm.c
>
> diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
> index 0371047..35faf24 100644
> --- a/drivers/scsi/ufs/Kconfig
> +++ b/drivers/scsi/ufs/Kconfig
> @@ -57,3 +57,14 @@ config SCSI_UFSHCD_PCI
>  	  If you have a controller with this interface, say Y or M here.
>
>  	  If unsure, say N.
> +
> +config SCSI_UFSHCD_PLATFORM
> +	tristate "Platform bus based UFS Controller support"
> +	depends on SCSI_UFSHCD
> +	---help---
> +	This selects the UFS host controller support. Select this if
> +	you have an UFS controller on Platform bus.
> +
> +	If you have a controller with this interface, say Y or M here.
> +
> +	  If unsure, say N.
> diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
> index 9eda0df..1e5bd48 100644
> --- a/drivers/scsi/ufs/Makefile
> +++ b/drivers/scsi/ufs/Makefile
> @@ -1,3 +1,4 @@
>  # UFSHCD makefile
>  obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
>  obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
> +obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c
> b/drivers/scsi/ufs/ufshcd-pltfrm.c
> new file mode 100644
> index 0000000..03319ac
> --- /dev/null
> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
> @@ -0,0 +1,217 @@
> +/*
> + * Universal Flash Storage Host controller Platform bus based glue driver
> + *
> + * This code is based on drivers/scsi/ufs/ufshcd-pltfrm.c
> + * Copyright (C) 2011-2013 Samsung India Software Operations
> + *
> + * Authors:
> + *	Santosh Yaraganavi <santosh.sy@samsung.com>
> + *	Vinayak Holikatti <h.vinayak@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * See the COPYING file in the top-level directory or visit
> + * <http://www.gnu.org/licenses/gpl-2.0.html>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * This program is provided "AS IS" and "WITH ALL FAULTS" and
> + * without warranty of any kind. You are solely responsible for
> + * determining the appropriateness of using and distributing
> + * the program and assume all risks associated with your exercise
> + * of rights with respect to the program, including but not limited
> + * to infringement of third party rights, the risks and costs of
> + * program errors, damage to or loss of data, programs or equipment,
> + * and unavailability or interruption of operations. Under no
> + * circumstances will the contributor of this Program be liable for
> + * any damages of any kind arising from your use or distribution of
> + * this program.
> + */
> +
> +#include "ufshcd.h"
> +#include <linux/platform_device.h>
> +
> +#ifdef CONFIG_PM
> +/**
> + * ufshcd_pltfrm_suspend - suspend power management function
> + * @dev: pointer to device handle
> + *
> + *
> + * Returns 0
> + */
> +static int ufshcd_pltfrm_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct ufs_hba *hba =  platform_get_drvdata(pdev);
> +
> +	/*
> +	 * TODO:
> +	 * 1. Call ufshcd_suspend
> +	 * 2. Do bus specific power management
> +	 */
> +
> +	disable_irq(hba->irq);
> +
> +	return 0;
> +}
> +
> +/**
> + * ufshcd_pltfrm_resume - resume power management function
> + * @dev: pointer to device handle
> + *
> + * Returns 0
> + */
> +static int ufshcd_pltfrm_resume(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct ufs_hba *hba =  platform_get_drvdata(pdev);
> +
> +	/*
> +	 * TODO:
> +	 * 1. Call ufshcd_resume.
> +	 * 2. Do bus specific wake up
> +	 */
> +
> +	enable_irq(hba->irq);
> +
> +	return 0;
> +}
> +#else
> +#define ufshcd_pltfrm_suspend	NULL
> +#define ufshcd_pltfrm_resume	NULL
> +#endif
> +
> +/**
> + * ufshcd_pltfrm_probe - probe routine of the driver
> + * @pdev: pointer to Platform device handle
> + *
> + * Returns 0 on success, non-zero value on failure
> + */
> +static int ufshcd_pltfrm_probe(struct platform_device *pdev)
> +{
> +	struct ufs_hba *hba;
> +	void __iomem *mmio_base;
> +	struct resource *mem_res;
> +	struct resource *irq_res;
> +	resource_size_t mem_size;
> +	int err;
> +	struct device *dev = &pdev->dev;
> +
> +	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!mem_res) {
> +		dev_err(&pdev->dev,
> +			"Memory resource not available\n");
> +		err = -ENODEV;
> +		goto out_error;
> +	}
> +
> +	mem_size = resource_size(mem_res);
> +	if (!request_mem_region(mem_res->start, mem_size, "ufshcd")) {
> +		dev_err(&pdev->dev,
> +			"Cannot reserve the memory resource\n");
> +		err = -EBUSY;
> +		goto out_error;
> +	}
> +
> +	mmio_base = ioremap_nocache(mem_res->start, mem_size);
> +	if (!mmio_base) {
> +		dev_err(&pdev->dev, "memory map failed\n");
> +		err = -ENOMEM;
> +		goto out_release_regions;
> +	}
> +
> +	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> +	if (!irq_res) {
> +		dev_err(&pdev->dev, "IRQ resource not available\n");
> +		err = -ENODEV;
> +		goto out_iounmap;
> +	}
> +
> +	err = dma_set_coherent_mask(dev, dev->coherent_dma_mask);
> +	if (err) {
> +		dev_err(&pdev->dev, "set dma mask failed\n");
> +		goto out_iounmap;
> +	}
> +
> +	err = ufshcd_init(&pdev->dev, &hba, mmio_base, irq_res->start);
> +	if (err) {
> +		dev_err(&pdev->dev, "Intialization failed\n");
> +		goto out_iounmap;
> +	}
> +
> +	platform_set_drvdata(pdev, hba);
> +
> +	return 0;
> +
> +out_iounmap:
> +	iounmap(mmio_base);
> +out_release_regions:
> +	release_mem_region(mem_res->start, mem_size);
> +out_error:
> +	return err;
> +}
> +
> +/**
> + * ufshcd_pltfrm_remove - remove platform driver routine
> + * @pdev: pointer to platform device handle
> + *
> + * Returns 0 on success, non-zero value on failure
> + */
> +static int ufshcd_pltfrm_remove(struct platform_device *pdev)
> +{
> +	struct resource *mem_res;
> +	resource_size_t mem_size;
> +	struct ufs_hba *hba =  platform_get_drvdata(pdev);
> +
> +	disable_irq(hba->irq);
> +
> +	/* Some buggy controllers raise interrupt after
> +	 * the resources are removed. So first we unregister the
> +	 * irq handler and then the resources used by driver
> +	 */
> +
> +	free_irq(hba->irq, hba);
> +	ufshcd_remove(hba);
> +	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!mem_res)
> +		dev_err(&pdev->dev, "ufshcd: Memory resource not available\n");
> +	else {
> +		mem_size = resource_size(mem_res);
> +		release_mem_region(mem_res->start, mem_size);
> +	}
> +	platform_set_drvdata(pdev, NULL);
> +	return 0;
> +}
> +
> +static const struct of_device_id ufs_of_match[] = {
> +	{ .compatible = "jedec,ufs-1.1"},
> +};
> +
> +static const struct dev_pm_ops ufshcd_dev_pm_ops = {
> +	.suspend	= ufshcd_pltfrm_suspend,
> +	.resume		= ufshcd_pltfrm_resume,
> +};
> +
> +static struct platform_driver ufshcd_pltfrm_driver = {
> +	.probe	= ufshcd_pltfrm_probe,
> +	.remove	= ufshcd_pltfrm_remove,
> +	.driver	= {
> +		.name	= "ufshcd",
> +		.owner	= THIS_MODULE,
> +		.pm	= &ufshcd_dev_pm_ops,
> +		.of_match_table = ufs_of_match,
> +	},
> +};
> +
> +module_platform_driver(ufshcd_pltfrm_driver);
> +
> +MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
> +MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
> +MODULE_DESCRIPTION("UFS host controller Pltform bus based glue driver");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION(UFSHCD_DRIVER_VERSION);
> --
> 1.7.5.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>


-- 
Maya Erez
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH V6 Resend2 2/2] [SCSI] ufs: Correct the expected data transfersize

[merez]

Hi James,

Can this patch be poushed to 3.9+ merge window?

Thnaks,
Maya
> This patch corrects the expected data transfer size of the
> command UPIU. The current implementation of cmd->transfersize
> is wrong as it probably equal to sector size. With this
> implementation the transfer size is updated correctly
>
> Reported-by: KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
> Tested-by: Maya Erez <merez@codeaurora.org>
> Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com>
> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com>
> ---
>  drivers/scsi/ufs/ufshcd.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 60fd40c..c32a478 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -478,7 +478,7 @@ static void ufshcd_compose_upiu(struct ufshcd_lrb
> *lrbp)
>  		ucd_cmd_ptr->header.dword_2 = 0;
>
>  		ucd_cmd_ptr->exp_data_transfer_len =
> -			cpu_to_be32(lrbp->cmd->transfersize);
> +			cpu_to_be32(lrbp->cmd->sdb.length);
>
>  		memcpy(ucd_cmd_ptr->cdb,
>  		       lrbp->cmd->cmnd,
> --
> 1.7.5.4
>
>


-- 
Maya Erez
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation