From: Hannes Reinecke <hare@suse.de>
To: James Bottomley <jbottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 2/5] tmscsim: Move 'last_reset' into host structure
Date: Mon, 6 May 2013 09:20:38 +0200 [thread overview]
Message-ID: <1367824841-47767-3-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1367824841-47767-1-git-send-email-hare@suse.de>
The 'last_reset' value is only used internally, so move it into
the internal host structure.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/tmscsim.c | 12 ++++++------
drivers/scsi/tmscsim.h | 1 +
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index 9327f5f..ec74087 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -521,7 +521,7 @@ dc390_StartSCSI( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_sr
pACB->SelConn++;
return 1;
}
- if (time_before (jiffies, pACB->pScsiHost->last_reset))
+ if (time_before (jiffies, pACB->last_reset))
{
DEBUG0(printk ("DC390: We were just reset and don't accept commands yet!\n"));
return 1;
@@ -1863,7 +1863,7 @@ dc390_ScsiRstDetect( struct dc390_acb* pACB )
/* delay half a second */
udelay (1000);
DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
- pACB->pScsiHost->last_reset = jiffies + 5*HZ/2
+ pACB->last_reset = jiffies + 5*HZ/2
+ HZ * dc390_eepromBuf[pACB->AdapterIndex][EE_DELAY];
pACB->Connected = 0;
@@ -2048,7 +2048,7 @@ static int DC390_bus_reset (struct scsi_cmnd *cmd)
dc390_ResetDevParam(pACB);
mdelay(1);
- pACB->pScsiHost->last_reset = jiffies + 3*HZ/2
+ pACB->last_reset = jiffies + 3*HZ/2
+ HZ * dc390_eepromBuf[pACB->AdapterIndex][EE_DELAY];
DC390_write8(ScsiCmd, CLEAR_FIFO_CMD);
@@ -2383,7 +2383,7 @@ static void dc390_init_hw(struct dc390_acb *pACB, u8 index)
if (pACB->Gmode2 & RST_SCSI_BUS) {
dc390_ResetSCSIBus(pACB);
udelay(1000);
- shost->last_reset = jiffies + HZ/2 +
+ pACB->last_reset = jiffies + HZ/2 +
HZ * dc390_eepromBuf[pACB->AdapterIndex][EE_DELAY];
}
@@ -2455,8 +2455,8 @@ static int dc390_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
shost->irq = pdev->irq;
shost->base = io_port;
shost->unique_id = io_port;
- shost->last_reset = jiffies;
-
+
+ pACB->last_reset = jiffies;
pACB->pScsiHost = shost;
pACB->IOPortBase = (u16) io_port;
pACB->IRQLevel = pdev->irq;
diff --git a/drivers/scsi/tmscsim.h b/drivers/scsi/tmscsim.h
index 77adc54..3d1bb4a 100644
--- a/drivers/scsi/tmscsim.h
+++ b/drivers/scsi/tmscsim.h
@@ -143,6 +143,7 @@ u8 Ignore_IRQ; /* Not used */
struct pci_dev *pdev;
+unsigned long last_reset;
unsigned long Cmds;
u32 SelLost;
u32 SelConn;
--
1.7.12.4
next prev parent reply other threads:[~2013-05-06 7:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-06 7:20 [PATCH 0/5] Cleanup struct Scsi_Host Hannes Reinecke
2013-05-06 7:20 ` [PATCH 1/5] scsi: remove 'resetting' field from " Hannes Reinecke
2013-05-06 7:20 ` Hannes Reinecke [this message]
2013-05-06 7:20 ` [PATCH 3/5] dc395: Move 'last_reset' into internal host structure Hannes Reinecke
2013-05-06 7:20 ` [PATCH 4/5] advansys: Remove references to 'last_reset' Hannes Reinecke
2013-05-06 7:20 ` [PATCH 5/5] scsi: Remove 'last_reset' for struct Scsi_Host Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1367824841-47767-3-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox