linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: James Bottomley <jbottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org, Joern Engel <joern@logfs.org>,
	Ewan Milne <emilne@redhat.com>,
	James Smart <james.smart@emulex.com>,
	Ren Mingxin <renmx@cn.fujitsu.com>,
	Roland Dreier <roland@purestorage.com>,
	Bryn Reeves <bmr@redhat.com>,
	Christoph Hellwig <hch@infradead.org>,
	Hannes Reinecke <hare@suse.de>
Subject: [PATCH 4/7] tmscsim: Move 'last_reset' into host structure
Date: Mon, 10 Jun 2013 13:11:50 +0200	[thread overview]
Message-ID: <1370862713-41323-5-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1370862713-41323-1-git-send-email-hare@suse.de>

The 'last_reset' value is only used internally, so move it into
the internal host structure.

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/tmscsim.c | 14 +++++++-------
 drivers/scsi/tmscsim.h |  1 +
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index 9327f5f..1142361 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -521,7 +521,7 @@ dc390_StartSCSI( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_sr
 	pACB->SelConn++;
 	return 1;
     }
-    if (time_before (jiffies, pACB->pScsiHost->last_reset))
+    if (time_before (jiffies, pACB->last_reset))
     {
 	DEBUG0(printk ("DC390: We were just reset and don't accept commands yet!\n"));
 	return 1;
@@ -1863,7 +1863,7 @@ dc390_ScsiRstDetect( struct dc390_acb* pACB )
     /* delay half a second */
     udelay (1000);
     DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
-    pACB->pScsiHost->last_reset = jiffies + 5*HZ/2
+    pACB->last_reset = jiffies + 5*HZ/2
 		    + HZ * dc390_eepromBuf[pACB->AdapterIndex][EE_DELAY];
     pACB->Connected = 0;
 
@@ -2048,9 +2048,9 @@ static int DC390_bus_reset (struct scsi_cmnd *cmd)
 
 	dc390_ResetDevParam(pACB);
 	mdelay(1);
-	pACB->pScsiHost->last_reset = jiffies + 3*HZ/2 
+	pACB->last_reset = jiffies + 3*HZ/2
 		+ HZ * dc390_eepromBuf[pACB->AdapterIndex][EE_DELAY];
-    
+
 	DC390_write8(ScsiCmd, CLEAR_FIFO_CMD);
 	DC390_read8(INT_Status);		/* Reset Pending INT */
 
@@ -2383,7 +2383,7 @@ static void dc390_init_hw(struct dc390_acb *pACB, u8 index)
 	if (pACB->Gmode2 & RST_SCSI_BUS) {
 		dc390_ResetSCSIBus(pACB);
 		udelay(1000);
-		shost->last_reset = jiffies + HZ/2 +
+		pACB->last_reset = jiffies + HZ/2 +
 			HZ * dc390_eepromBuf[pACB->AdapterIndex][EE_DELAY];
 	}
 
@@ -2455,8 +2455,8 @@ static int dc390_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	shost->irq = pdev->irq;
 	shost->base = io_port;
 	shost->unique_id = io_port;
-	shost->last_reset = jiffies;
-	
+
+	pACB->last_reset = jiffies;
 	pACB->pScsiHost = shost;
 	pACB->IOPortBase = (u16) io_port;
 	pACB->IRQLevel = pdev->irq;
diff --git a/drivers/scsi/tmscsim.h b/drivers/scsi/tmscsim.h
index 77adc54..3d1bb4a 100644
--- a/drivers/scsi/tmscsim.h
+++ b/drivers/scsi/tmscsim.h
@@ -143,6 +143,7 @@ u8		Ignore_IRQ;	/* Not used */
 
 struct pci_dev	*pdev;
 
+unsigned long   last_reset;
 unsigned long	Cmds;
 u32		SelLost;
 u32		SelConn;
-- 
1.7.12.4


  parent reply	other threads:[~2013-06-10 11:12 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-10 11:11 [PATCH 0/7] Limit overall SCSI EH runtime Hannes Reinecke
2013-06-10 11:11 ` [PATCH 1/7] dpt_i2o: Remove DPTI_STATE_IOCTL Hannes Reinecke
2013-06-10 11:11 ` [PATCH 2/7] dpt_i2o: return SCSI_MLQUEUE_HOST_BUSY when in reset Hannes Reinecke
2013-06-10 11:11 ` [PATCH 3/7] advansys: Remove 'last_reset' references Hannes Reinecke
2013-06-10 11:11 ` Hannes Reinecke [this message]
2013-06-10 11:11 ` [PATCH 5/7] dc395: Move 'last_reset' into internal host structure Hannes Reinecke
2013-06-10 11:11 ` [PATCH 6/7] scsi: remove check for 'resetting' Hannes Reinecke
2013-06-10 11:11 ` [PATCH 7/7] scsi: Add 'eh_deadline' to limit SCSI EH runtime Hannes Reinecke
2013-06-27 14:33   ` Ewan Milne
2013-06-28  7:14     ` Hannes Reinecke
2013-06-28 12:54       ` Ewan Milne
2013-06-28  7:29   ` Bart Van Assche
2013-06-28  7:42     ` Hannes Reinecke
2013-06-27  9:23 ` [PATCH 0/7] Limit overall " Ren Mingxin
  -- strict thread matches above, loose matches on Subject: below --
2013-07-01  6:50 [PATCHv2 " Hannes Reinecke
2013-07-01  6:50 ` [PATCH 4/7] tmscsim: Move 'last_reset' into host structure Hannes Reinecke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1370862713-41323-5-git-send-email-hare@suse.de \
    --to=hare@suse.de \
    --cc=bmr@redhat.com \
    --cc=emilne@redhat.com \
    --cc=hch@infradead.org \
    --cc=james.smart@emulex.com \
    --cc=jbottomley@parallels.com \
    --cc=joern@logfs.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=renmx@cn.fujitsu.com \
    --cc=roland@purestorage.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).