From: Andy Grover <agrover@redhat.com>
To: target-devel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Subject: [PATCH 3/5] target/iscsi: Remove macros that contain typecasts
Date: Tue, 20 Aug 2013 18:00:05 -0700 [thread overview]
Message-ID: <1377046807-15860-4-git-send-email-agrover@redhat.com> (raw)
In-Reply-To: <1377046807-15860-1-git-send-email-agrover@redhat.com>
These just want to return a pointer instead of a value, but are otherwise
the same.
ISCSI_TPG_LUN macro was unused.
Signed-off-by: Andy Grover <agrover@redhat.com>
---
drivers/target/iscsi/iscsi_target.c | 2 +-
drivers/target/iscsi/iscsi_target_auth.c | 2 +-
drivers/target/iscsi/iscsi_target_core.h | 4 ----
drivers/target/iscsi/iscsi_target_erl0.c | 10 +++++-----
drivers/target/iscsi/iscsi_target_login.c | 16 ++++++++--------
drivers/target/iscsi/iscsi_target_nego.c | 6 +++---
6 files changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 92f2776..12c1349 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4375,7 +4375,7 @@ int iscsit_close_connection(
int iscsit_close_session(struct iscsi_session *sess)
{
- struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
+ struct iscsi_portal_group *tpg = sess->tpg;
struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
if (atomic_read(&sess->nconn)) {
diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c
index cee1754..727c458 100644
--- a/drivers/target/iscsi/iscsi_target_auth.c
+++ b/drivers/target/iscsi/iscsi_target_auth.c
@@ -113,7 +113,7 @@ static struct iscsi_chap *chap_server_open(
/*
* Set Identifier.
*/
- chap->id = ISCSI_TPG_C(conn)->tpg_chap_id++;
+ chap->id = conn->tpg->tpg_chap_id++;
*aic_len += sprintf(aic_str + *aic_len, "CHAP_I=%d", chap->id);
*aic_len += 1;
pr_debug("[server] Sending CHAP_I=%d\n", chap->id);
diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h
index 59b5125..53f18e5 100644
--- a/drivers/target/iscsi/iscsi_target_core.h
+++ b/drivers/target/iscsi/iscsi_target_core.h
@@ -825,10 +825,6 @@ struct iscsi_portal_group {
struct list_head tpg_list;
} ____cacheline_aligned;
-#define ISCSI_TPG_C(c) ((struct iscsi_portal_group *)(c)->tpg)
-#define ISCSI_TPG_LUN(c, l) ((iscsi_tpg_list_t *)(c)->tpg->tpg_lun_list_t[l])
-#define ISCSI_TPG_S(s) ((struct iscsi_portal_group *)(s)->tpg)
-
struct iscsi_wwn_stat_grps {
struct config_group iscsi_stat_group;
struct config_group iscsi_instance_group;
diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c
index 08bd878..5d0ef48 100644
--- a/drivers/target/iscsi/iscsi_target_erl0.c
+++ b/drivers/target/iscsi/iscsi_target_erl0.c
@@ -759,7 +759,7 @@ int iscsit_check_post_dataout(
static void iscsit_handle_time2retain_timeout(unsigned long data)
{
struct iscsi_session *sess = (struct iscsi_session *) data;
- struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
+ struct iscsi_portal_group *tpg = sess->tpg;
struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
spin_lock_bh(&se_tpg->session_lock);
@@ -803,9 +803,9 @@ void iscsit_start_time2retain_handler(struct iscsi_session *sess)
* Only start Time2Retain timer when the associated TPG is still in
* an ACTIVE (eg: not disabled or shutdown) state.
*/
- spin_lock(&ISCSI_TPG_S(sess)->tpg_state_lock);
- tpg_active = (ISCSI_TPG_S(sess)->tpg_state == TPG_STATE_ACTIVE);
- spin_unlock(&ISCSI_TPG_S(sess)->tpg_state_lock);
+ spin_lock(&sess->tpg->tpg_state_lock);
+ tpg_active = (sess->tpg->tpg_state == TPG_STATE_ACTIVE);
+ spin_unlock(&sess->tpg->tpg_state_lock);
if (!tpg_active)
return;
@@ -831,7 +831,7 @@ void iscsit_start_time2retain_handler(struct iscsi_session *sess)
*/
int iscsit_stop_time2retain_timer(struct iscsi_session *sess)
{
- struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
+ struct iscsi_portal_group *tpg = sess->tpg;
struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
if (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)
diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c
index c29fffd..ca32470 100644
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -349,15 +349,15 @@ static int iscsi_login_zero_tsih_s2(
* Assign a new TPG Session Handle. Note this is protected with
* struct iscsi_portal_group->np_login_sem from iscsit_access_np().
*/
- sess->tsih = ++ISCSI_TPG_S(sess)->ntsih;
+ sess->tsih = ++sess->tpg->ntsih;
if (!sess->tsih)
- sess->tsih = ++ISCSI_TPG_S(sess)->ntsih;
+ sess->tsih = ++sess->tpg->ntsih;
/*
* Create the default params from user defined values..
*/
if (iscsi_copy_param_list(&conn->param_list,
- ISCSI_TPG_C(conn)->param_list, 1) < 0) {
+ conn->tpg->param_list, 1) < 0) {
iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
ISCSI_LOGIN_STATUS_NO_RESOURCES);
return -1;
@@ -382,7 +382,7 @@ static int iscsi_login_zero_tsih_s2(
* In our case, we have already located the struct iscsi_tiqn at this point.
*/
memset(buf, 0, 32);
- sprintf(buf, "TargetPortalGroupTag=%hu", ISCSI_TPG_S(sess)->tpgt);
+ sprintf(buf, "TargetPortalGroupTag=%hu", sess->tpg->tpgt);
if (iscsi_change_param_value(buf, conn->param_list, 0) < 0) {
iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
ISCSI_LOGIN_STATUS_NO_RESOURCES);
@@ -577,7 +577,7 @@ static int iscsi_login_non_zero_tsih_s2(
iscsi_login_set_conn_values(sess, conn, pdu->cid);
if (iscsi_copy_param_list(&conn->param_list,
- ISCSI_TPG_C(conn)->param_list, 0) < 0) {
+ conn->tpg->param_list, 0) < 0) {
iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
ISCSI_LOGIN_STATUS_NO_RESOURCES);
return -1;
@@ -595,7 +595,7 @@ static int iscsi_login_non_zero_tsih_s2(
* In our case, we have already located the struct iscsi_tiqn at this point.
*/
memset(buf, 0, 32);
- sprintf(buf, "TargetPortalGroupTag=%hu", ISCSI_TPG_S(sess)->tpgt);
+ sprintf(buf, "TargetPortalGroupTag=%hu", sess->tpg->tpgt);
if (iscsi_change_param_value(buf, conn->param_list, 0) < 0) {
iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
ISCSI_LOGIN_STATUS_NO_RESOURCES);
@@ -693,7 +693,7 @@ int iscsi_post_login_handler(
int stop_timer = 0;
struct iscsi_session *sess = conn->sess;
struct se_session *se_sess = sess->se_sess;
- struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
+ struct iscsi_portal_group *tpg = sess->tpg;
struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
struct iscsi_thread_set *ts;
@@ -1156,7 +1156,7 @@ old_sess_out:
spin_lock_bh(&conn->sess->conn_lock);
if (conn->sess->session_state == TARG_SESS_STATE_FAILED) {
struct se_portal_group *se_tpg =
- &ISCSI_TPG_C(conn)->tpg_se_tpg;
+ &conn->tpg->tpg_se_tpg;
atomic_set(&conn->sess->session_continuation, 0);
spin_unlock_bh(&conn->sess->conn_lock);
diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c
index 08ebbad..563eacf 100644
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -699,7 +699,7 @@ static int iscsi_target_handle_csg_zero(
return -1;
if (!iscsi_check_negotiated_keys(conn->param_list)) {
- if (ISCSI_TPG_C(conn)->tpg_attrib.authentication &&
+ if (conn->tpg->tpg_attrib.authentication &&
!strncmp(param->value, NONE, 4)) {
pr_err("Initiator sent AuthMethod=None but"
" Target is enforcing iSCSI Authentication,"
@@ -709,7 +709,7 @@ static int iscsi_target_handle_csg_zero(
return -1;
}
- if (ISCSI_TPG_C(conn)->tpg_attrib.authentication &&
+ if (conn->tpg->tpg_attrib.authentication &&
!login->auth_complete)
return 0;
@@ -772,7 +772,7 @@ static int iscsi_target_handle_csg_one(struct iscsi_conn *conn, struct iscsi_log
}
if (!login->auth_complete &&
- ISCSI_TPG_C(conn)->tpg_attrib.authentication) {
+ conn->tpg->tpg_attrib.authentication) {
pr_err("Initiator is requesting CSG: 1, has not been"
" successfully authenticated, and the Target is"
" enforcing iSCSI Authentication, login failed.\n");
--
1.7.1
next prev parent reply other threads:[~2013-08-21 2:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-21 1:00 [PATCH 0/5] Macro and qla npiv cleanups Andy Grover
2013-08-21 1:00 ` [PATCH 1/5] target: Remove TF_CIT_TMPL macro Andy Grover
2013-08-21 6:27 ` Christoph Hellwig
2013-08-21 1:00 ` [PATCH 2/5] target/iscsi: Remove iscsi dereferencing macros Andy Grover
2013-08-21 6:27 ` Christoph Hellwig
2013-08-21 1:00 ` Andy Grover [this message]
2013-08-21 6:28 ` [PATCH 3/5] target/iscsi: Remove macros that contain typecasts Christoph Hellwig
2013-08-21 1:00 ` [PATCH 4/5] target/qla2xxx: Define NPIV ops in terms of normal ops Andy Grover
2013-08-21 6:30 ` Christoph Hellwig
2013-08-21 16:02 ` Andy Grover
2013-08-21 1:00 ` [PATCH 5/5] target/qla2xxx: Remove QLA_TPG_ATTRIB macro Andy Grover
2013-08-21 6:30 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377046807-15860-4-git-send-email-agrover@redhat.com \
--to=agrover@redhat.com \
--cc=linux-scsi@vger.kernel.org \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).