From mboxrd@z Thu Jan 1 00:00:00 1970 From: James Smart Subject: [PATCH 5/18] lpfc 8.3.42: Back out data count,(residual fcfi_parm) fix for bad target. Date: Fri, 6 Sep 2013 12:19:17 -0400 Message-ID: <1378484357.14051.24.camel@myfc17> Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: Received: from cmexedge2.ext.emulex.com ([138.239.224.100]:49776 "EHLO CMEXEDGE2.ext.emulex.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753758Ab3IFQTy (ORCPT ); Fri, 6 Sep 2013 12:19:54 -0400 Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org Back out data count,(residual fcfi_parm) fix for bad target. Signed-off-by: James Smart --- lpfc_scsi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff -upNr a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c --- a/drivers/scsi/lpfc/lpfc_scsi.c 2013-09-06 10:04:03.734058299 -0400 +++ b/drivers/scsi/lpfc/lpfc_scsi.c 2013-09-06 10:04:08.267058402 -0400 @@ -3966,11 +3966,11 @@ lpfc_handle_fcp_err(struct lpfc_vport *v /* * Check SLI validation that all the transfer was actually done - * (fcpi_parm should be zero). + * (fcpi_parm should be zero). Apply check only to reads. */ - } else if (fcpi_parm) { + } else if (fcpi_parm && (cmnd->sc_data_direction == DMA_FROM_DEVICE)) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR, - "9029 FCP Data Transfer Check Error: " + "9029 FCP Read Check Error Data: " "x%x x%x x%x x%x x%x\n", be32_to_cpu(fcpcmd->fcpDl), be32_to_cpu(fcprsp->rspResId),