From: Saurav Kashyap <saurav.kashyap@qlogic.com>
To: jbottomley@parallels.com
Cc: giridhar.malavali@qlogic.com, saurav.kashyap@qlogic.com,
andrew.vasquez@qlogic.com, linux-scsi@vger.kernel.org
Subject: [PATCH 00/22] qla2xxx: Patches for 3.13 scsi "misc" branch.
Date: Wed, 30 Oct 2013 03:38:07 -0400 [thread overview]
Message-ID: <1383118709-5569-1-git-send-email-saurav.kashyap@qlogic.com> (raw)
Hi James,
Please apply the following patches to the scsi tree, misc branch at your
earliest convenience.
Thanks,
~Saurav
Armen Baloyan (5):
qla2xxx: Print proper QLAFX00 product name at probe.
qla2xxx: Fix issue with not displaying node name after system reboot.
qla2xxx: Add logic to abort BSG commands for ISPFX00.
qla2xxx: Add changes to obtain ISPFX00 adapters product information
in accordance with firmware update.
qla2xxx: Replace a constant with a macro definition for
host->canqueue assigmnment.
Atul Deshmukh (1):
qla2xxx: Clear RISC INT reg only for an event and not always while
polling.
Chad Dupuis (7):
qla2xxx: Honor execute firmware failures.
qla2xxx: Add BPM support for ISP25xx.
Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when
driver resources are low."
qla2xxx: Refactor shutdown code so some functionality can be reused.
qla2xxx: Disable adapter when we encounter a PCI disconnect.
qla2xxx: Use the correct mailbox registers when acknowledging an IDC
request on ISP8044.
qla2xxx: Only complete dcbx_comp and lb_portup_comp for virtual port
index 0.
Joe Carnuccio (3):
qla2xxx: Correctly set mailboxes for extended init control block.
qla2xxx: Add BSG interface for read/write serdes register.
qla2xxx: Fix undefined behavior in call to snprintf().
Saurav Kashyap (3):
qla2xxx: Don't consider the drivers knocked out of IDC participation
for future reset recovery process.
qla2xxx: Adding MAINTAINERS for qla2xxx FC-SCSI driver
qla2xxx: Update the driver version to 8.06.00.12-k.
Sawan Chandak (3):
qla2xxx: Disable INTx interrupt for ISP82XX
qla2xxx: Use scnprintf() instead of snprintf() in the sysfs handlers.
qla2xxx: Reset nic_core_reset_owner on moving from COLD to READY for
ISP8044
MAINTAINERS | 3 +-
drivers/scsi/qla2xxx/qla_attr.c | 116 ++++++------
drivers/scsi/qla2xxx/qla_bsg.c | 44 +++++
drivers/scsi/qla2xxx/qla_bsg.h | 13 ++
drivers/scsi/qla2xxx/qla_dbg.c | 7 +-
drivers/scsi/qla2xxx/qla_def.h | 22 +--
drivers/scsi/qla2xxx/qla_gbl.h | 13 +-
drivers/scsi/qla2xxx/qla_init.c | 2 +
drivers/scsi/qla2xxx/qla_inline.h | 19 --
drivers/scsi/qla2xxx/qla_isr.c | 82 +++++++--
drivers/scsi/qla2xxx/qla_mbx.c | 73 +++++++-
drivers/scsi/qla2xxx/qla_mr.c | 39 +++-
drivers/scsi/qla2xxx/qla_mr.h | 12 +-
drivers/scsi/qla2xxx/qla_nx.c | 20 ++-
drivers/scsi/qla2xxx/qla_nx2.c | 25 ++--
drivers/scsi/qla2xxx/qla_os.c | 366 ++++++++++++++++++------------------
drivers/scsi/qla2xxx/qla_version.h | 2 +-
17 files changed, 534 insertions(+), 324 deletions(-)
--
1.7.7
next reply other threads:[~2013-10-30 8:09 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-30 7:38 Saurav Kashyap [this message]
2013-10-30 7:38 ` [PATCH 01/22] qla2xxx: Print proper QLAFX00 product name at probe Saurav Kashyap
2013-10-30 7:38 ` [PATCH 02/22] qla2xxx: Honor execute firmware failures Saurav Kashyap
2013-10-30 7:38 ` [PATCH 03/22] qla2xxx: Disable INTx interrupt for ISP82XX Saurav Kashyap
2013-10-30 7:38 ` [PATCH 04/22] qla2xxx: Correctly set mailboxes for extended init control block Saurav Kashyap
2013-10-30 7:38 ` [PATCH 05/22] qla2xxx: Add BPM support for ISP25xx Saurav Kashyap
2013-10-30 7:38 ` [PATCH 06/22] qla2xxx: Don't consider the drivers knocked out of IDC participation for future reset recovery process Saurav Kashyap
2013-10-30 7:38 ` [PATCH 07/22] Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low." Saurav Kashyap
2013-10-30 7:38 ` [PATCH 08/22] qla2xxx: Refactor shutdown code so some functionality can be reused Saurav Kashyap
2013-10-30 7:38 ` [PATCH 09/22] qla2xxx: Disable adapter when we encounter a PCI disconnect Saurav Kashyap
2013-10-30 7:38 ` [PATCH 10/22] qla2xxx: Fix issue with not displaying node name after system reboot Saurav Kashyap
2013-10-30 7:38 ` [PATCH 11/22] qla2xxx: Add BSG interface for read/write serdes register Saurav Kashyap
2013-10-30 7:38 ` [PATCH 12/22] qla2xxx: Fix undefined behavior in call to snprintf() Saurav Kashyap
2013-10-30 7:38 ` [PATCH 13/22] qla2xxx: Clear RISC INT reg only for an event and not always while polling Saurav Kashyap
2013-10-30 7:38 ` [PATCH 14/22] qla2xxx: Add logic to abort BSG commands for ISPFX00 Saurav Kashyap
2013-10-30 7:38 ` [PATCH 15/22] qla2xxx: Add changes to obtain ISPFX00 adapters product information in accordance with firmware update Saurav Kashyap
2013-10-30 7:38 ` [PATCH 16/22] qla2xxx: Use the correct mailbox registers when acknowledging an IDC request on ISP8044 Saurav Kashyap
2013-10-30 7:38 ` [PATCH 17/22] qla2xxx: Use scnprintf() instead of snprintf() in the sysfs handlers Saurav Kashyap
2013-10-30 7:38 ` [PATCH 18/22] qla2xxx: Only complete dcbx_comp and lb_portup_comp for virtual port index 0 Saurav Kashyap
2013-10-30 7:38 ` [PATCH 19/22] qla2xxx: Reset nic_core_reset_owner on moving from COLD to READY for ISP8044 Saurav Kashyap
2013-10-30 7:38 ` [PATCH 20/22] qla2xxx: Replace a constant with a macro definition for host->canqueue assigmnment Saurav Kashyap
2013-10-30 7:38 ` [PATCH 21/22] qla2xxx: Adding MAINTAINERS for qla2xxx FC-SCSI driver Saurav Kashyap
2013-10-30 7:38 ` [PATCH 22/22] qla2xxx: Update the driver version to 8.06.00.12-k Saurav Kashyap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383118709-5569-1-git-send-email-saurav.kashyap@qlogic.com \
--to=saurav.kashyap@qlogic.com \
--cc=andrew.vasquez@qlogic.com \
--cc=giridhar.malavali@qlogic.com \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).