From: Saurav Kashyap <saurav.kashyap@qlogic.com>
To: jbottomley@parallels.com
Cc: giridhar.malavali@qlogic.com, saurav.kashyap@qlogic.com,
andrew.vasquez@qlogic.com, linux-scsi@vger.kernel.org
Subject: [PATCH 12/20] qla2xxx: Remove Marker type IOCB logic for ISPFX00.
Date: Fri, 13 Dec 2013 15:03:52 -0500 [thread overview]
Message-ID: <1386965040-20611-13-git-send-email-saurav.kashyap@qlogic.com> (raw)
In-Reply-To: <1386965040-20611-1-git-send-email-saurav.kashyap@qlogic.com>
From: Armen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
---
drivers/scsi/qla2xxx/qla_iocb.c | 11 +----------
drivers/scsi/qla2xxx/qla_mr.c | 12 ------------
drivers/scsi/qla2xxx/qla_mr.h | 24 ------------------------
3 files changed, 1 insertions(+), 46 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 5e6ac6c..0aad5e4 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -524,7 +524,6 @@ __qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req,
{
mrk_entry_t *mrk;
struct mrk_entry_24xx *mrk24 = NULL;
- struct mrk_entry_fx00 *mrkfx = NULL;
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
@@ -541,15 +540,7 @@ __qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req,
mrk->entry_type = MARKER_TYPE;
mrk->modifier = type;
if (type != MK_SYNC_ALL) {
- if (IS_QLAFX00(ha)) {
- mrkfx = (struct mrk_entry_fx00 *) mrk;
- mrkfx->handle = MAKE_HANDLE(req->id, mrkfx->handle);
- mrkfx->handle_hi = 0;
- mrkfx->tgt_id = cpu_to_le16(loop_id);
- mrkfx->lun[1] = LSB(lun);
- mrkfx->lun[2] = MSB(lun);
- host_to_fcp_swap(mrkfx->lun, sizeof(mrkfx->lun));
- } else if (IS_FWI2_CAPABLE(ha)) {
+ if (IS_FWI2_CAPABLE(ha)) {
mrk24 = (struct mrk_entry_24xx *) mrk;
mrk24->nport_handle = cpu_to_le16(loop_id);
mrk24->lun[1] = LSB(lun);
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index a9b5cf4..893e56d 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -2140,7 +2140,6 @@ qlafx00_initialize_adapter(scsi_qla_host_t *vha)
vha->device_flags = DFLG_NO_CABLE;
vha->dpc_flags = 0;
vha->flags.management_server_logged_in = 0;
- vha->marker_needed = 0;
ha->isp_abort_cnt = 0;
ha->beacon_blink_led = 0;
@@ -3213,17 +3212,6 @@ qlafx00_start_scsi(srb_t *sp)
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
- /* Forcing marker needed for now */
- vha->marker_needed = 0;
-
- /* Send marker if required */
- if (vha->marker_needed != 0) {
- if (qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL) !=
- QLA_SUCCESS)
- return QLA_FUNCTION_FAILED;
- vha->marker_needed = 0;
- }
-
/* Acquire ring specific lock */
spin_lock_irqsave(&ha->hardware_lock, flags);
diff --git a/drivers/scsi/qla2xxx/qla_mr.h b/drivers/scsi/qla2xxx/qla_mr.h
index 5f3ed8b..1e60ca2 100644
--- a/drivers/scsi/qla2xxx/qla_mr.h
+++ b/drivers/scsi/qla2xxx/qla_mr.h
@@ -47,30 +47,6 @@ struct cmd_type_7_fx00 {
uint32_t dseg_0_len; /* Data segment 0 length. */
};
-/*
- * ISP queue - marker entry structure definition.
- */
-struct mrk_entry_fx00 {
- uint8_t entry_type; /* Entry type. */
- uint8_t entry_count; /* Entry count. */
- uint8_t handle_count; /* Handle count. */
- uint8_t entry_status; /* Entry Status. */
-
- uint32_t handle; /* System handle. */
- uint32_t handle_hi; /* System handle. */
-
- uint16_t tgt_id; /* Target ID. */
-
- uint8_t modifier; /* Modifier (7-0). */
- uint8_t reserved_1;
-
- uint8_t reserved_2[5];
-
- uint8_t lun[8]; /* FCP LUN (BE). */
- uint8_t reserved_3[36];
-};
-
-
#define STATUS_TYPE_FX00 0x01 /* Status entry. */
struct sts_entry_fx00 {
uint8_t entry_type; /* Entry type. */
--
1.7.7
next prev parent reply other threads:[~2013-12-13 20:36 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-13 20:03 [PATCH 00/20] qla2xxx: Patches for scsi "misc" branch Saurav Kashyap
2013-12-13 20:03 ` [PATCH 01/20] qla2xxx: Add mutex around optrom calls to serialize accesses Saurav Kashyap
2013-12-13 20:03 ` [PATCH 02/20] qla2xxx: Add handling for boot indication progress AENs for ISPFX00 Saurav Kashyap
2013-12-13 20:03 ` [PATCH 03/20] qla2xxx: Replace constant value for IOCTL IOCB abort execution status with a macro " Saurav Kashyap
2013-12-13 20:03 ` [PATCH 04/20] qla2xxx: Use proper message for Non owner reset ACK Timeout Saurav Kashyap
2013-12-13 20:03 ` [PATCH 05/20] qla2xxx: Remove init control block related dead code for ISPFX00 Saurav Kashyap
2013-12-13 20:03 ` [PATCH 06/20] qla2xxx: Select correct request queue for error type IOCB " Saurav Kashyap
2013-12-13 20:03 ` [PATCH 07/20] qla2xxx: Enable the Flash Access Control (FAC) mailbox command Saurav Kashyap
2013-12-13 20:03 ` [PATCH 08/20] qla2xxx: Properly handle 32 bit mailbox register for ISPFX00 Saurav Kashyap
2013-12-13 20:03 ` [PATCH 09/20] qla2xxx: Set host can_queue value based on available resources Saurav Kashyap
2013-12-13 20:03 ` [PATCH 10/20] scsi_transport_fc: Add 32Gbps speed definition Saurav Kashyap
2013-12-13 20:03 ` [PATCH 11/20] qla2xxx: Add support for ISP2701 Saurav Kashyap
2013-12-16 6:56 ` Bart Van Assche
2013-12-13 20:03 ` Saurav Kashyap [this message]
2013-12-13 20:03 ` [PATCH 13/20] qla2xxx: Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for ISP8044 Saurav Kashyap
2013-12-13 20:03 ` [PATCH 14/20] qla2xxx: Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec Saurav Kashyap
2013-12-13 20:03 ` [PATCH 15/20] qla2xxx: Avoid poisoining in the response queue for ISPFX00 Saurav Kashyap
2013-12-16 6:56 ` Bart Van Assche
2013-12-13 20:03 ` [PATCH 16/20] qla2xxx: Simplyfy the ISPFX00 interrupt handler code " Saurav Kashyap
2013-12-16 6:56 ` Bart Van Assche
2013-12-17 4:01 ` Saurav Kashyap
2013-12-13 20:03 ` [PATCH 17/20] qla2xxx: Read capture firmware dump on mailbox timeout for ISP8044 and ISP82XX Saurav Kashyap
2013-12-13 20:03 ` [PATCH 18/20] qla2xxx: Correctly set the read_optrom pointer for ISP8044 Saurav Kashyap
2013-12-13 20:03 ` [PATCH 19/20] qla2xxx: Fix multiqueue MSI-X registration Saurav Kashyap
2013-12-16 6:47 ` Bart Van Assche
2013-12-13 20:04 ` [PATCH 20/20] qla2xxx: Update the driver version to 8.07.00.02-k Saurav Kashyap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386965040-20611-13-git-send-email-saurav.kashyap@qlogic.com \
--to=saurav.kashyap@qlogic.com \
--cc=andrew.vasquez@qlogic.com \
--cc=giridhar.malavali@qlogic.com \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).