From: Saurav Kashyap <saurav.kashyap@qlogic.com>
To: jbottomley@parallels.com
Cc: giridhar.malavali@qlogic.com, saurav.kashyap@qlogic.com,
andrew.vasquez@qlogic.com, linux-scsi@vger.kernel.org
Subject: [PATCH V2 15/20] qla2xxx: Avoid poisoning in the response queue for ISPFX00.
Date: Mon, 16 Dec 2013 22:28:38 -0500 [thread overview]
Message-ID: <1387250923-1041-16-git-send-email-saurav.kashyap@qlogic.com> (raw)
In-Reply-To: <1387250923-1041-1-git-send-email-saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
---
drivers/scsi/qla2xxx/qla_mr.c | 15 ++++++++-------
1 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index 03e2050..290322f 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -2821,16 +2821,22 @@ qlafx00_process_response_queue(struct scsi_qla_host *vha,
{
struct sts_entry_fx00 *pkt;
response_t *lptr;
+ uint16_t lreq_q_in = 0;
+ uint16_t lreq_q_out = 0;
- while (RD_REG_DWORD((void __iomem *)&(rsp->ring_ptr->signature)) !=
- RESPONSE_PROCESSED) {
+ lreq_q_in = RD_REG_DWORD(rsp->rsp_q_in);
+ lreq_q_out = RD_REG_DWORD(rsp->rsp_q_out);
+
+ while (lreq_q_in != lreq_q_out) {
lptr = rsp->ring_ptr;
memcpy_fromio(rsp->rsp_pkt, (void __iomem *)lptr,
sizeof(rsp->rsp_pkt));
pkt = (struct sts_entry_fx00 *)rsp->rsp_pkt;
rsp->ring_index++;
+ lreq_q_out++;
if (rsp->ring_index == rsp->length) {
+ lreq_q_out = 0;
rsp->ring_index = 0;
rsp->ring_ptr = rsp->ring;
} else {
@@ -2842,7 +2848,6 @@ qlafx00_process_response_queue(struct scsi_qla_host *vha,
qlafx00_error_entry(vha, rsp,
(struct sts_entry_fx00 *)pkt, pkt->entry_status,
pkt->entry_type);
- goto next_iter;
continue;
}
@@ -2876,10 +2881,6 @@ qlafx00_process_response_queue(struct scsi_qla_host *vha,
pkt->entry_type, pkt->entry_status);
break;
}
-next_iter:
- WRT_REG_DWORD((void __iomem *)&lptr->signature,
- RESPONSE_PROCESSED);
- wmb();
}
/* Adjust ring index */
--
1.7.7
next prev parent reply other threads:[~2013-12-17 4:01 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 3:28 [PATCH V2 00/20] qla2xxx: Patches for 3.13 scsi "misc" branch Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 01/20] qla2xxx: Add mutex around optrom calls to serialize accesses Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 02/20] qla2xxx: Add handling for boot indication progress AENs for ISPFX00 Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 03/20] qla2xxx: Replace constant value for IOCTL IOCB abort execution status with a macro " Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 04/20] qla2xxx: Use proper message for Non owner reset ACK Timeout Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 05/20] qla2xxx: Remove init control block related dead code for ISPFX00 Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 06/20] qla2xxx: Select correct request queue for error type IOCB " Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 07/20] qla2xxx: Enable the Flash Access Control (FAC) mailbox command Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 08/20] qla2xxx: Properly handle 32 bit mailbox register for ISPFX00 Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 09/20] qla2xxx: Set host can_queue value based on available resources Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 10/20] scsi_transport_fc: Add 32Gbps speed definition Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 11/20] qla2xxx: Add support for ISP2071 Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 12/20] qla2xxx: Remove Marker type IOCB logic for ISPFX00 Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 13/20] qla2xxx: Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for ISP8044 Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 14/20] qla2xxx: Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec Saurav Kashyap
2013-12-17 3:28 ` Saurav Kashyap [this message]
2013-12-17 3:28 ` [PATCH V2 16/20] qla2xxx: Simplify the ISPFX00 interrupt handler code for ISPFX00 Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 17/20] qla2xxx: Read capture firmware dump on mailbox timeout for ISP8044 and ISP82XX Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 18/20] qla2xxx: Correctly set the read_optrom pointer for ISP8044 Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 19/20] qla2xxx: Fix multiqueue MSI-X registration Saurav Kashyap
2013-12-17 3:28 ` [PATCH V2 20/20] qla2xxx: Update the driver version to 8.07.00.02-k Saurav Kashyap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387250923-1041-16-git-send-email-saurav.kashyap@qlogic.com \
--to=saurav.kashyap@qlogic.com \
--cc=andrew.vasquez@qlogic.com \
--cc=giridhar.malavali@qlogic.com \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).