linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Saurav Kashyap <saurav.kashyap@qlogic.com>
To: jbottomley@parallels.com
Cc: giridhar.malavali@qlogic.com, saurav.kashyap@qlogic.com,
	andrew.vasquez@qlogic.com, linux-scsi@vger.kernel.org
Subject: [PATCH V2 08/20] qla2xxx: Properly handle 32 bit mailbox register for ISPFX00.
Date: Mon, 16 Dec 2013 22:28:31 -0500	[thread overview]
Message-ID: <1387250923-1041-9-git-send-email-saurav.kashyap@qlogic.com> (raw)
In-Reply-To: <1387250923-1041-1-git-send-email-saurav.kashyap@qlogic.com>

Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
---
 drivers/scsi/qla2xxx/qla_mr.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index 9839da8..ed44ec6 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -2916,9 +2916,9 @@ qlafx00_async_event(scsi_qla_host_t *vha)
 		break;
 
 	case QLAFX00_MBA_PORT_UPDATE:		/* Port database update */
-		ha->aenmb[1] = RD_REG_WORD(&reg->aenmailbox1);
-		ha->aenmb[2] = RD_REG_WORD(&reg->aenmailbox2);
-		ha->aenmb[3] = RD_REG_WORD(&reg->aenmailbox3);
+		ha->aenmb[1] = RD_REG_DWORD(&reg->aenmailbox1);
+		ha->aenmb[2] = RD_REG_DWORD(&reg->aenmailbox2);
+		ha->aenmb[3] = RD_REG_DWORD(&reg->aenmailbox3);
 		ql_dbg(ql_dbg_async, vha, 0x5077,
 		    "Asynchronous port Update received "
 		    "aenmb[0]: %x, aenmb[1]: %x, aenmb[2]: %x, aenmb[3]: %x\n",
@@ -2975,7 +2975,7 @@ static void
 qlafx00_mbx_completion(scsi_qla_host_t *vha, uint32_t mb0)
 {
 	uint16_t	cnt;
-	uint16_t __iomem *wptr;
+	uint32_t __iomem *wptr;
 	struct qla_hw_data *ha = vha->hw;
 	struct device_reg_fx00 __iomem *reg = &ha->iobase->ispfx00;
 
@@ -2985,10 +2985,10 @@ qlafx00_mbx_completion(scsi_qla_host_t *vha, uint32_t mb0)
 	/* Load return mailbox registers. */
 	ha->flags.mbox_int = 1;
 	ha->mailbox_out32[0] = mb0;
-	wptr = (uint16_t __iomem *)&reg->mailbox17;
+	wptr = (uint32_t __iomem *)&reg->mailbox17;
 
 	for (cnt = 1; cnt < ha->mbx_count; cnt++) {
-		ha->mailbox_out32[cnt] = RD_REG_WORD(wptr);
+		ha->mailbox_out32[cnt] = RD_REG_DWORD(wptr);
 		wptr++;
 	}
 }
-- 
1.7.7


  parent reply	other threads:[~2013-12-17  4:01 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-17  3:28 [PATCH V2 00/20] qla2xxx: Patches for 3.13 scsi "misc" branch Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 01/20] qla2xxx: Add mutex around optrom calls to serialize accesses Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 02/20] qla2xxx: Add handling for boot indication progress AENs for ISPFX00 Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 03/20] qla2xxx: Replace constant value for IOCTL IOCB abort execution status with a macro " Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 04/20] qla2xxx: Use proper message for Non owner reset ACK Timeout Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 05/20] qla2xxx: Remove init control block related dead code for ISPFX00 Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 06/20] qla2xxx: Select correct request queue for error type IOCB " Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 07/20] qla2xxx: Enable the Flash Access Control (FAC) mailbox command Saurav Kashyap
2013-12-17  3:28 ` Saurav Kashyap [this message]
2013-12-17  3:28 ` [PATCH V2 09/20] qla2xxx: Set host can_queue value based on available resources Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 10/20] scsi_transport_fc: Add 32Gbps speed definition Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 11/20] qla2xxx: Add support for ISP2071 Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 12/20] qla2xxx: Remove Marker type IOCB logic for ISPFX00 Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 13/20] qla2xxx: Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for ISP8044 Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 14/20] qla2xxx: Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 15/20] qla2xxx: Avoid poisoning in the response queue for ISPFX00 Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 16/20] qla2xxx: Simplify the ISPFX00 interrupt handler code " Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 17/20] qla2xxx: Read capture firmware dump on mailbox timeout for ISP8044 and ISP82XX Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 18/20] qla2xxx: Correctly set the read_optrom pointer for ISP8044 Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 19/20] qla2xxx: Fix multiqueue MSI-X registration Saurav Kashyap
2013-12-17  3:28 ` [PATCH V2 20/20] qla2xxx: Update the driver version to 8.07.00.02-k Saurav Kashyap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1387250923-1041-9-git-send-email-saurav.kashyap@qlogic.com \
    --to=saurav.kashyap@qlogic.com \
    --cc=andrew.vasquez@qlogic.com \
    --cc=giridhar.malavali@qlogic.com \
    --cc=jbottomley@parallels.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).