From: Hannes Reinecke <hare@suse.de>
To: James Bottomley <jbottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org, Christoph Hellwig <hch@infradead.org>,
Hannes Reinecke <hare@suse.de>,
Jeremy Linton <jlinton@tributary.com>, Kay Sievers <kay@vrfy.org>,
Doug Gilbert <dgilbert@interlog.com>,
Kai Makisara <kai.makisara@kolumbus.fi>
Subject: [PATCH 2/3] Add EVPD page 0x83 entries to sysfs
Date: Wed, 12 Feb 2014 11:24:30 +0100 [thread overview]
Message-ID: <1392200671-35624-3-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1392200671-35624-1-git-send-email-hare@suse.de>
EVPD page 0x83 is used to uniquely identify the device.
So instead of having each and every program issue a separate
SG_IO call to retrieve this information it does make far more
sense to display it in sysfs.
The page is displayed in its entirety with the attribute
'vpd_pg83', and the individual designators are stored in
ident_<association>_<designator> attributes.
Duplicate designators are added as individual lines to
the corresponding attribute.
Cc: Jeremy Linton <jlinton@tributary.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/scsi_scan.c | 3 +
drivers/scsi/scsi_sysfs.c | 314 ++++++++++++++++++++++++++++++++++++++++++++-
include/scsi/scsi.h | 4 +-
include/scsi/scsi_device.h | 3 +
4 files changed, 322 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 307a811..073fb84 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -929,6 +929,9 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
if (*bflags & BLIST_SKIP_VPD_PAGES)
sdev->skip_vpd_pages = 1;
+ if (sdev->scsi_level >= SCSI_3)
+ scsi_attach_vpd_ident(sdev);
+
transport_configure_device(&sdev->sdev_gendev);
if (sdev->host->hostt->slave_configure) {
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 196e59a..ec8f037 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -80,6 +80,36 @@ const char *scsi_host_state_name(enum scsi_host_state state)
return name;
}
+static const struct {
+ int value;
+ char *name;
+} scsi_protocol_list[] = {
+ { SCSI_PROTOCOL_FCP, "fcp" },
+ { SCSI_PROTOCOL_SPI, "spi" },
+ { SCSI_PROTOCOL_SSA, "ssa" },
+ { SCSI_PROTOCOL_SBP, "sbp" },
+ { SCSI_PROTOCOL_SRP, "srp" },
+ { SCSI_PROTOCOL_ISCSI, "iscsi" },
+ { SCSI_PROTOCOL_SAS, "sas" },
+ { SCSI_PROTOCOL_ADT, "adt" },
+ { SCSI_PROTOCOL_ATA, "ata" },
+ { SCSI_PROTOCOL_UAS, "usb" },
+ { SCSI_PROTOCOL_SOP, "pcie" },
+};
+const char *scsi_protocol_name(int proto)
+{
+ int i;
+ char *name = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(scsi_protocol_list); i++) {
+ if (scsi_protocol_list[i].value == proto) {
+ name = scsi_protocol_list[i].name;
+ break;
+ }
+ }
+ return name;
+}
+
static int check_set(unsigned int *val, char *src)
{
char *last;
@@ -415,6 +445,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
scsi_target_reap(scsi_target(sdev));
+ kfree(sdev->vpd_ident);
kfree(sdev->inquiry);
kfree(sdev);
@@ -754,8 +785,241 @@ store_queue_type_field(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR(queue_type, S_IRUGO | S_IWUSR, show_queue_type_field,
store_queue_type_field);
+void scsi_attach_vpd_ident(struct scsi_device *sdev)
+{
+ int ret;
+ int vpd_len = 255;
+ unsigned char *buffer;
+retry:
+ buffer = kmalloc(vpd_len, GFP_KERNEL);
+ if (!buffer)
+ return;
+
+ ret = scsi_get_vpd_page(sdev, 0x83, buffer, vpd_len);
+ if (ret) {
+ kfree(buffer);
+ return;
+ }
+ if (buffer[1] != 0x83) {
+ kfree(buffer);
+ return;
+ }
+ if ((buffer[2] << 8) + buffer[3] + 4 > vpd_len) {
+ vpd_len = (buffer[2] << 8) + buffer[3] + 4;
+ kfree(buffer);
+ goto retry;
+ }
+ sdev->vpd_ident_len = (buffer[2] << 8) + buffer[3] + 4;
+ sdev->vpd_ident = buffer;
+}
+
static ssize_t
-show_iostat_counterbits(struct device *dev, struct device_attribute *attr, char *buf)
+show_vpd_pg83(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ int len = 0, i;
+
+ if (!sdev->vpd_ident)
+ return -EINVAL;
+
+ len = 0;
+ for (i = 0; i < sdev->vpd_ident_len; i += 16) {
+ hex_dump_to_buffer(sdev->vpd_ident + i, sdev->vpd_ident_len,
+ 16, 1, buf + len, PAGE_SIZE, false);
+ strcat(buf + len, "\n");
+ len += strlen(buf + len);
+ }
+ return len;
+}
+static DEVICE_ATTR(vpd_pg83, S_IRUGO, show_vpd_pg83, NULL);
+
+#define SCSI_VPD_ASSOC_lun 0x0
+#define SCSI_VPD_ASSOC_port 0x1
+#define SCSI_VPD_ASSOC_target 0x2
+
+#define SCSI_VPD_DESIG_vendor 0x0
+#define SCSI_VPD_DESIG_t10 0x1
+#define SCSI_VPD_DESIG_eui 0x2
+#define SCSI_VPD_DESIG_naa 0x3
+#define SCSI_VPD_DESIG_relport 0x4
+#define SCSI_VPD_DESIG_tpgrp 0x5
+#define SCSI_VPD_DESIG_lugrp 0x6
+#define SCSI_VPD_DESIG_md5 0x7
+#define SCSI_VPD_DESIG_scsi_name 0x8
+#define SCSI_VPD_DESIG_proto 0x9
+
+static bool
+scsi_test_vpd_ident(struct scsi_device *sdev, int assoc, int desig)
+{
+ unsigned char *d;
+
+ if (!sdev->vpd_ident || sdev->vpd_ident_len < 4)
+ return false;
+
+ d = sdev->vpd_ident + 4;
+ while (d < sdev->vpd_ident + sdev->vpd_ident_len) {
+ if (d[3] == 0)
+ break;
+ if (((d[1] >> 4) & 3) == assoc &&
+ (d[1] & 0xf) == desig)
+ return true;
+ d += d[3] + 4;
+ }
+ return false;
+}
+
+static int
+scsi_parse_vpd_ident(struct scsi_device *sdev,
+ int assoc, int desig, char *buf)
+{
+ unsigned char *d;
+ int len = 0, j;
+
+ if (!sdev->vpd_ident || sdev->vpd_ident_len < 4)
+ return -ENOENT;
+
+ d = sdev->vpd_ident + 4;
+ while (d < sdev->vpd_ident + sdev->vpd_ident_len) {
+ const char *proto = NULL;
+
+ if (d[3] == 0)
+ break;
+ if (d + d[3] + 4 > sdev->vpd_ident + sdev->vpd_ident_len)
+ return -EINVAL;
+ if (((d[1] >> 4) & 0x3) == assoc &&
+ (d[1] & 0xf) == desig) {
+ if ((d[1] & 0x80) &&
+ (proto = scsi_protocol_name(d[0] >> 4)))
+ len += sprintf(buf + len, "%s:", proto);
+
+ switch (d[1] & 0xf) {
+ case SCSI_VPD_DESIG_eui:
+ case SCSI_VPD_DESIG_naa:
+ case SCSI_VPD_DESIG_md5:
+ switch (d[3]) {
+ case 8:
+ len += sprintf(buf + len, "%8phN\n",
+ d + 4);
+ break;
+ case 12:
+ len += sprintf(buf + len, "%12phN\n",
+ d + 4);
+ break;
+ case 16:
+ len += sprintf(buf + len, "%16phN\n",
+ d + 4);
+ break;
+ }
+ break;
+ case SCSI_VPD_DESIG_relport:
+ case SCSI_VPD_DESIG_tpgrp:
+ case SCSI_VPD_DESIG_lugrp:
+ len += sprintf(buf + len, "%d\n",
+ (int)(d[6] << 8) + d[7]);
+ break;
+ case SCSI_VPD_DESIG_vendor:
+ if ((d[0] & 0xf) == 1) {
+ for (j = 0; j < d[3]; j++) {
+ len += sprintf(buf + len,
+ "%02x",
+ d[4 + j]);
+ }
+ } else {
+ snprintf(buf + len, d[3] + 1,
+ "%s", d + 4);
+ len += d[3];
+ }
+ len += sprintf(buf + len, "\n");
+ break;
+ case SCSI_VPD_DESIG_t10:
+ /* T10 Vendor is always ASCII */
+ snprintf(buf + len, 9, "%s ", d + 4);
+ len += 8;
+ if ((d[0] & 0xf) == 1) {
+ for (j = 0; j < d[3] - 8; j++) {
+ len += sprintf(buf + len,
+ "%02x",
+ d[12 + j]);
+ }
+ } else {
+ snprintf(buf + len, d[3] - 7,
+ "%s", d + 12);
+ len += d[3] - 8;
+ }
+ len += sprintf(buf + len, "\n");
+ break;
+ case SCSI_VPD_DESIG_scsi_name:
+ snprintf(buf + len, d[3] + 2, "%s\n", d + 4);
+ len += d[3] + 1;
+ break;
+ case SCSI_VPD_DESIG_proto:
+ if (d[1] & 80) {
+ if ((d[0] >> 4) == 0x9)
+ len += sprintf(buf + len,
+ "%d-%d\n",
+ d[4], d[6]);
+ else if ((d[0] >> 4) == 0xa) {
+ j = (d[4] << 8) + d[5];
+ len += sprintf(buf + len,
+ "%d\n", j);
+ }
+ }
+ break;
+ }
+ }
+ d += d[3] + 4;
+ }
+
+ return len ? len : -EINVAL;
+}
+
+#define sdev_evpd_ident(assoc, desig) \
+static ssize_t \
+sdev_show_evpd_ident_##assoc##_##desig (struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct scsi_device *sdev = to_scsi_device(dev); \
+ return scsi_parse_vpd_ident(sdev, SCSI_VPD_ASSOC_##assoc, \
+ SCSI_VPD_DESIG_##desig, buf); \
+}
+
+#define sdev_evpd_attr(assoc, desig) \
+ sdev_evpd_ident(assoc, desig) \
+static DEVICE_ATTR(ident_##assoc##_##desig, S_IRUGO, \
+ sdev_show_evpd_ident_##assoc##_##desig, NULL);
+
+sdev_evpd_attr(lun, vendor);
+sdev_evpd_attr(lun, t10);
+sdev_evpd_attr(lun, eui);
+sdev_evpd_attr(lun, naa);
+sdev_evpd_attr(lun, lugrp);
+sdev_evpd_attr(lun, md5);
+sdev_evpd_attr(lun, scsi_name);
+sdev_evpd_attr(port, vendor);
+sdev_evpd_attr(port, t10);
+sdev_evpd_attr(port, relport);
+sdev_evpd_attr(port, tpgrp);
+sdev_evpd_attr(port, eui);
+sdev_evpd_attr(port, naa);
+sdev_evpd_attr(port, scsi_name);
+sdev_evpd_attr(port, proto);
+sdev_evpd_attr(target, vendor);
+sdev_evpd_attr(target, t10);
+sdev_evpd_attr(target, eui);
+sdev_evpd_attr(target, naa);
+sdev_evpd_attr(target, scsi_name);
+
+#define sdev_evpd_test_and_show_attr(sdev, attr, assoc, desig) \
+ if (attr == &dev_attr_ident_##assoc##_##desig.attr && \
+ !scsi_test_vpd_ident(sdev, SCSI_VPD_ASSOC_##assoc, \
+ SCSI_VPD_DESIG_##desig)) \
+ return 0
+
+static ssize_t
+show_iostat_counterbits(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
return snprintf(buf, 20, "%d\n", (int)sizeof(atomic_t) * 8);
}
@@ -905,6 +1169,33 @@ static umode_t scsi_sdev_attr_is_visible(struct kobject *kobj,
!sdev->host->hostt->change_queue_type)
return S_IRUGO;
+ if (attr == &dev_attr_vpd_pg83.attr &&
+ !sdev->vpd_ident)
+ return 0;
+
+ sdev_evpd_test_and_show_attr(sdev, attr, lun, vendor);
+ sdev_evpd_test_and_show_attr(sdev, attr, lun, t10);
+ sdev_evpd_test_and_show_attr(sdev, attr, lun, eui);
+ sdev_evpd_test_and_show_attr(sdev, attr, lun, naa);
+ sdev_evpd_test_and_show_attr(sdev, attr, lun, lugrp);
+ sdev_evpd_test_and_show_attr(sdev, attr, lun, md5);
+ sdev_evpd_test_and_show_attr(sdev, attr, lun, scsi_name);
+
+ sdev_evpd_test_and_show_attr(sdev, attr, port, vendor);
+ sdev_evpd_test_and_show_attr(sdev, attr, port, t10);
+ sdev_evpd_test_and_show_attr(sdev, attr, port, eui);
+ sdev_evpd_test_and_show_attr(sdev, attr, port, naa);
+ sdev_evpd_test_and_show_attr(sdev, attr, port, relport);
+ sdev_evpd_test_and_show_attr(sdev, attr, port, tpgrp);
+ sdev_evpd_test_and_show_attr(sdev, attr, port, scsi_name);
+ sdev_evpd_test_and_show_attr(sdev, attr, port, proto);
+
+ sdev_evpd_test_and_show_attr(sdev, attr, target, vendor);
+ sdev_evpd_test_and_show_attr(sdev, attr, target, t10);
+ sdev_evpd_test_and_show_attr(sdev, attr, target, eui);
+ sdev_evpd_test_and_show_attr(sdev, attr, target, naa);
+ sdev_evpd_test_and_show_attr(sdev, attr, target, scsi_name);
+
return attr->mode;
}
@@ -930,6 +1221,27 @@ static struct attribute *scsi_sdev_attrs[] = {
&dev_attr_queue_depth.attr,
&dev_attr_queue_type.attr,
&dev_attr_queue_ramp_up_period.attr,
+ &dev_attr_vpd_pg83.attr,
+ &dev_attr_ident_lun_vendor.attr,
+ &dev_attr_ident_lun_t10.attr,
+ &dev_attr_ident_lun_eui.attr,
+ &dev_attr_ident_lun_naa.attr,
+ &dev_attr_ident_lun_lugrp.attr,
+ &dev_attr_ident_lun_md5.attr,
+ &dev_attr_ident_lun_scsi_name.attr,
+ &dev_attr_ident_port_vendor.attr,
+ &dev_attr_ident_port_t10.attr,
+ &dev_attr_ident_port_relport.attr,
+ &dev_attr_ident_port_tpgrp.attr,
+ &dev_attr_ident_port_eui.attr,
+ &dev_attr_ident_port_naa.attr,
+ &dev_attr_ident_port_scsi_name.attr,
+ &dev_attr_ident_port_proto.attr,
+ &dev_attr_ident_target_vendor.attr,
+ &dev_attr_ident_target_t10.attr,
+ &dev_attr_ident_target_eui.attr,
+ &dev_attr_ident_target_naa.attr,
+ &dev_attr_ident_target_scsi_name.attr,
REF_EVT(media_change),
REF_EVT(inquiry_change_reported),
REF_EVT(capacity_change_reported),
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 0a4edfe..8fd13bb 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -334,7 +334,7 @@ static inline int scsi_status_is_good(int status)
#define TYPE_OSD 0x11
#define TYPE_NO_LUN 0x7f
-/* SCSI protocols; these are taken from SPC-3 section 7.5 */
+/* SCSI protocols; these are taken from SPC-4 section 7.6 */
enum scsi_protocol {
SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */
SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */
@@ -345,6 +345,8 @@ enum scsi_protocol {
SCSI_PROTOCOL_SAS = 6,
SCSI_PROTOCOL_ADT = 7, /* Media Changers */
SCSI_PROTOCOL_ATA = 8,
+ SCSI_PROTOCOL_UAS = 9,
+ SCSI_PROTOCOL_SOP = 0xa,
SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
};
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index dcb2b73..81c7900 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -113,6 +113,8 @@ struct scsi_device {
const char * vendor; /* [back_compat] point into 'inquiry' ... */
const char * model; /* ... after scan; point to static string */
const char * rev; /* ... "nullnullnullnull" before scan */
+ unsigned char vpd_ident_len;
+ unsigned char *vpd_ident;
struct scsi_target *sdev_target; /* used only for single_lun */
unsigned int sdev_bflags; /* black/white flags as also found in
@@ -308,6 +310,7 @@ extern int scsi_add_device(struct Scsi_Host *host, uint channel,
extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
extern void scsi_remove_device(struct scsi_device *);
extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
+void scsi_attach_vpd_ident(struct scsi_device *sdev);
extern int scsi_device_get(struct scsi_device *);
extern void scsi_device_put(struct scsi_device *);
--
1.7.12.4
next prev parent reply other threads:[~2014-02-12 10:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-12 10:24 [PATCHv6 0/3] Display EVPD pages in sysfs Hannes Reinecke
2014-02-12 10:24 ` [PATCH 1/3] scsi_sysfs: Implement 'is_visible' callback Hannes Reinecke
2014-02-12 10:24 ` Hannes Reinecke [this message]
2014-02-12 10:24 ` [PATCH 3/3] Add EVPD page 0x80 to sysfs Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392200671-35624-3-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=dgilbert@interlog.com \
--cc=hch@infradead.org \
--cc=jbottomley@parallels.com \
--cc=jlinton@tributary.com \
--cc=kai.makisara@kolumbus.fi \
--cc=kay@vrfy.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox