From: Christoph Hellwig <hch@lst.de>
To: James Bottomley <James.Bottomley@HansenPartnership.com>,
linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>,
Bart Van Assche <bvanassche@fusionio.com>,
Mike Christie <michaelc@cs.wisc.edu>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Robert Elliott <Elliott@hp.com>, Webb Scales <webbnh@hp.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 06/14] scsi: convert target_busy to an atomic_t
Date: Fri, 18 Jul 2014 12:13:05 +0200 [thread overview]
Message-ID: <1405678393-11497-7-git-send-email-hch@lst.de> (raw)
In-Reply-To: <1405678393-11497-1-git-send-email-hch@lst.de>
Avoid taking the host-wide host_lock to check the per-target queue limit.
Instead we do an atomic_inc_return early on to grab our slot in the queue,
and if nessecary decrement it after finishing all checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Webb Scales <webbnh@hp.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Robert Elliott <elliott@hp.com>
---
drivers/scsi/scsi_lib.c | 53 ++++++++++++++++++++++++++++------------------
include/scsi/scsi_device.h | 4 ++--
2 files changed, 34 insertions(+), 23 deletions(-)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 112c737..0580711 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -294,7 +294,7 @@ void scsi_device_unbusy(struct scsi_device *sdev)
spin_lock_irqsave(shost->host_lock, flags);
shost->host_busy--;
- starget->target_busy--;
+ atomic_dec(&starget->target_busy);
if (unlikely(scsi_host_in_recovery(shost) &&
(shost->host_failed || shost->host_eh_scheduled)))
scsi_eh_wakeup(shost);
@@ -361,7 +361,7 @@ static inline int scsi_device_is_busy(struct scsi_device *sdev)
static inline int scsi_target_is_busy(struct scsi_target *starget)
{
return ((starget->can_queue > 0 &&
- starget->target_busy >= starget->can_queue) ||
+ atomic_read(&starget->target_busy) >= starget->can_queue) ||
starget->target_blocked);
}
@@ -1279,37 +1279,50 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
struct scsi_device *sdev)
{
struct scsi_target *starget = scsi_target(sdev);
- int ret = 0;
+ unsigned int busy;
- spin_lock_irq(shost->host_lock);
if (starget->single_lun) {
+ spin_lock_irq(shost->host_lock);
if (starget->starget_sdev_user &&
- starget->starget_sdev_user != sdev)
- goto out;
+ starget->starget_sdev_user != sdev) {
+ spin_unlock_irq(shost->host_lock);
+ return 0;
+ }
starget->starget_sdev_user = sdev;
+ spin_unlock_irq(shost->host_lock);
}
- if (starget->target_busy == 0 && starget->target_blocked) {
+ busy = atomic_inc_return(&starget->target_busy) - 1;
+ if (starget->target_blocked) {
+ if (busy)
+ goto starved;
+
/*
* unblock after target_blocked iterates to zero
*/
- if (--starget->target_blocked != 0)
- goto out;
+ spin_lock_irq(shost->host_lock);
+ if (--starget->target_blocked != 0) {
+ spin_unlock_irq(shost->host_lock);
+ goto out_dec;
+ }
+ spin_unlock_irq(shost->host_lock);
SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
"unblocking target at zero depth\n"));
}
- if (scsi_target_is_busy(starget)) {
- list_move_tail(&sdev->starved_entry, &shost->starved_list);
- goto out;
- }
+ if (starget->can_queue > 0 && busy >= starget->can_queue)
+ goto starved;
- scsi_target(sdev)->target_busy++;
- ret = 1;
-out:
+ return 1;
+
+starved:
+ spin_lock_irq(shost->host_lock);
+ list_move_tail(&sdev->starved_entry, &shost->starved_list);
spin_unlock_irq(shost->host_lock);
- return ret;
+out_dec:
+ atomic_dec(&starget->target_busy);
+ return 0;
}
/*
@@ -1419,7 +1432,7 @@ static void scsi_kill_request(struct request *req, struct request_queue *q)
spin_unlock(sdev->request_queue->queue_lock);
spin_lock(shost->host_lock);
shost->host_busy++;
- starget->target_busy++;
+ atomic_inc(&starget->target_busy);
spin_unlock(shost->host_lock);
spin_lock(sdev->request_queue->queue_lock);
@@ -1589,9 +1602,7 @@ static void scsi_request_fn(struct request_queue *q)
return;
host_not_ready:
- spin_lock_irq(shost->host_lock);
- scsi_target(sdev)->target_busy--;
- spin_unlock_irq(shost->host_lock);
+ atomic_dec(&scsi_target(sdev)->target_busy);
not_ready:
/*
* lock q, handle tag, requeue req, and decrement device_busy. We
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 9aa38f7..4e078b6 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -291,8 +291,8 @@ struct scsi_target {
unsigned int expecting_lun_change:1; /* A device has reported
* a 3F/0E UA, other devices on
* the same target will also. */
- /* commands actually active on LLD. protected by host lock. */
- unsigned int target_busy;
+ /* commands actually active on LLD. */
+ atomic_t target_busy;
/*
* LLDs should set this in the slave_alloc host template callout.
* If set to zero then there is not limit.
--
1.9.1
next prev parent reply other threads:[~2014-07-18 10:13 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 10:12 scsi-mq V4 Christoph Hellwig
2014-07-18 10:13 ` [PATCH 01/14] scsi: add scsi_setup_cmnd helper Christoph Hellwig
2014-07-22 3:42 ` Martin K. Petersen
2014-07-22 17:20 ` Webb Scales
2014-07-18 10:13 ` [PATCH 02/14] scsi: split __scsi_queue_insert Christoph Hellwig
2014-07-22 3:44 ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 03/14] scsi: centralize command re-queueing in scsi_dispatch_fn Christoph Hellwig
2014-07-22 3:46 ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 04/14] scsi: set ->scsi_done before calling scsi_dispatch_cmd Christoph Hellwig
2014-07-22 3:48 ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 05/14] scsi: push host_lock down into scsi_{host,target}_queue_ready Christoph Hellwig
2014-07-22 3:52 ` Martin K. Petersen
2014-07-18 10:13 ` Christoph Hellwig [this message]
2014-07-22 3:56 ` [PATCH 06/14] scsi: convert target_busy to an atomic_t Martin K. Petersen
2014-07-18 10:13 ` [PATCH 07/14] scsi: convert host_busy to atomic_t Christoph Hellwig
2014-07-22 4:01 ` Martin K. Petersen
2014-07-22 4:18 ` Martin K. Petersen
2014-07-25 11:38 ` Christoph Hellwig
2014-07-18 10:13 ` [PATCH 08/14] scsi: convert device_busy " Christoph Hellwig
2014-07-18 10:13 ` [PATCH 09/14] scsi: fix the {host,target,device}_blocked counter mess Christoph Hellwig
2014-07-25 19:08 ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 10/14] scsi: only maintain target_blocked if the driver has a target queue limit Christoph Hellwig
2014-07-25 19:10 ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 11/14] scsi: unwind blk_end_request_all and blk_end_request_err calls Christoph Hellwig
2014-07-25 19:12 ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 12/14] scatterlist: allow chaining to preallocated chunks Christoph Hellwig
2014-07-25 19:15 ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 13/14] scsi: add support for a blk-mq based I/O path Christoph Hellwig
2014-07-25 19:29 ` Martin K. Petersen
2014-08-18 22:21 ` Kashyap Desai
2014-08-19 15:41 ` Kashyap Desai
2014-08-19 16:06 ` Christoph Hellwig
2014-08-19 16:11 ` Kashyap Desai
2014-07-18 10:13 ` [PATCH 14/14] fnic: reject device resets without assigned tags for the blk-mq case Christoph Hellwig
2014-07-25 19:31 ` Martin K. Petersen
-- strict thread matches above, loose matches on Subject: below --
2014-06-25 16:51 scsi-mq V2 Christoph Hellwig
2014-06-25 16:51 ` [PATCH 06/14] scsi: convert target_busy to an atomic_t Christoph Hellwig
2014-07-09 11:15 ` Hannes Reinecke
2014-06-12 13:48 scsi-mq Christoph Hellwig
2014-06-12 13:48 ` [PATCH 06/14] scsi: convert target_busy to an atomic_t Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405678393-11497-7-git-send-email-hch@lst.de \
--to=hch@lst.de \
--cc=Elliott@hp.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=axboe@kernel.dk \
--cc=bvanassche@fusionio.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=michaelc@cs.wisc.edu \
--cc=webbnh@hp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).