From: Hannes Reinecke <hare@suse.de>
To: Christoph Hellwig <hch@lst.de>
Cc: James Bottomley <jbottomley@parallels.com>,
Sagi Grimberg <sagig@dev.mellanox.co.il>,
Webb Scales <webbnh@hp.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 4/5] tcm_loop: Fixup tag handling
Date: Thu, 2 Oct 2014 12:43:12 +0200 [thread overview]
Message-ID: <1412246593-107001-5-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1412246593-107001-1-git-send-email-hare@suse.de>
The SCSI command tag is set to the tag assigned from the block
layer, not the SCSI-II tag message. So we need to convert
it into the correct SCSI-II tag message based on the
device flags, not the tag value itself.
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/target/loopback/tcm_loop.c | 23 ++++++++---------------
1 file changed, 8 insertions(+), 15 deletions(-)
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index 340de9d..c2a9370 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -153,18 +153,11 @@ static int tcm_loop_change_queue_type(struct scsi_device *sdev, int tag)
/*
* Locate the SAM Task Attr from struct scsi_cmnd *
*/
-static int tcm_loop_sam_attr(struct scsi_cmnd *sc)
-{
- if (sc->device->tagged_supported) {
- switch (sc->tag) {
- case HEAD_OF_QUEUE_TAG:
- return MSG_HEAD_TAG;
- case ORDERED_QUEUE_TAG:
- return MSG_ORDERED_TAG;
- default:
- break;
- }
- }
+static int tcm_loop_sam_attr(struct scsi_cmnd *sc, int tag)
+{
+ if (sc->device->tagged_supported &&
+ sc->device->ordered_tags && tag >= 0)
+ return MSG_ORDERED_TAG;
return MSG_SIMPLE_TAG;
}
@@ -227,7 +220,7 @@ static void tcm_loop_submission_work(struct work_struct *work)
rc = target_submit_cmd_map_sgls(se_cmd, tl_nexus->se_sess, sc->cmnd,
&tl_cmd->tl_sense_buf[0], tl_cmd->sc->device->lun,
- transfer_length, tcm_loop_sam_attr(sc),
+ transfer_length, tcm_loop_sam_attr(sc, tl_cmd->sc_cmd_tag),
sc->sc_data_direction, 0,
scsi_sglist(sc), scsi_sg_count(sc),
sgl_bidi, sgl_bidi_count,
@@ -266,7 +259,7 @@ static int tcm_loop_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *sc)
}
tl_cmd->sc = sc;
- tl_cmd->sc_cmd_tag = sc->tag;
+ tl_cmd->sc_cmd_tag = sc->request->tag;
INIT_WORK(&tl_cmd->work, tcm_loop_submission_work);
queue_work(tcm_loop_workqueue, &tl_cmd->work);
return 0;
@@ -370,7 +363,7 @@ static int tcm_loop_abort_task(struct scsi_cmnd *sc)
*/
tl_tpg = &tl_hba->tl_hba_tpgs[sc->device->id];
ret = tcm_loop_issue_tmr(tl_tpg, tl_nexus, sc->device->lun,
- sc->tag, TMR_ABORT_TASK);
+ sc->request->tag, TMR_ABORT_TASK);
return (ret == TMR_FUNCTION_COMPLETE) ? SUCCESS : FAILED;
}
--
1.8.5.2
next prev parent reply other threads:[~2014-10-02 10:43 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-02 10:43 [RFC PATCH 0/5] Remove scmd->tag Hannes Reinecke
2014-10-02 10:43 ` [PATCH 1/5] NCR5380: Whitespace cleanup Hannes Reinecke
2014-10-02 11:07 ` Finn Thain
2014-10-02 11:12 ` Hannes Reinecke
2014-10-02 10:43 ` [PATCH 2/5] scsi: Remove references to linked commands Hannes Reinecke
2014-10-02 10:43 ` [PATCH 3/5] vmw_pvscsi: fixup tagging Hannes Reinecke
2014-10-02 10:43 ` Hannes Reinecke [this message]
2014-10-02 10:43 ` [PATCH 5/5] scsi: Remove scmd->tag Hannes Reinecke
2014-10-02 11:22 ` Christoph Hellwig
2014-10-02 11:36 ` Hannes Reinecke
2014-10-02 11:48 ` Finn Thain
2014-10-02 11:20 ` [RFC PATCH 0/5] " Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412246593-107001-5-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=hch@lst.de \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
--cc=sagig@dev.mellanox.co.il \
--cc=webbnh@hp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox