[PATCHv2 0/3] Initial ZAC support

[PATCHv2 0/3] Initial ZAC support

[Hannes Reinecke]

Hi all,

this patchset updates the ATA stack to correctly detect
host-managed ZAC devices.

Hannes Reinecke (3):
  libsas: use ata_dev_classify()
  libata: Implement ATA_DEV_ZAC
  libata-scsi: Update SATL for ZAC drives

 drivers/ata/libata-core.c           | 20 +++++++----
 drivers/ata/libata-eh.c             |  7 ++--
 drivers/ata/libata-scsi.c           | 30 +++++++++++++++--
 drivers/ata/libata-transport.c      |  1 +
 drivers/scsi/aic94xx/aic94xx_task.c | 10 +++---
 drivers/scsi/isci/request.c         |  4 +--
 drivers/scsi/libsas/sas_ata.c       | 66 +++++++------------------------------
 drivers/scsi/mvsas/mv_sas.c         |  4 +--
 drivers/scsi/pm8001/pm8001_hwi.c    |  2 +-
 drivers/scsi/pm8001/pm80xx_hwi.c    |  2 +-
 include/linux/libata.h              |  6 ++--
 include/scsi/libsas.h               | 11 ++-----
 12 files changed, 76 insertions(+), 87 deletions(-)

-- 
1.8.5.2

[PATCH 1/3] libsas: use ata_dev_classify()

[Hannes Reinecke]

Use the ata device class from libata in libsas instead of checking
the supported command set and switch to using ata_dev_classify()
instead of our own method.

Cc: Tejun Heo <tj@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/aic94xx/aic94xx_task.c | 10 +++---
 drivers/scsi/isci/request.c         |  4 +--
 drivers/scsi/libsas/sas_ata.c       | 66 +++++++------------------------------
 drivers/scsi/mvsas/mv_sas.c         |  4 +--
 drivers/scsi/pm8001/pm8001_hwi.c    |  2 +-
 drivers/scsi/pm8001/pm80xx_hwi.c    |  2 +-
 include/scsi/libsas.h               | 11 ++-----
 7 files changed, 25 insertions(+), 74 deletions(-)

diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c
index 59b86e2..7abbe42 100644
--- a/drivers/scsi/aic94xx/aic94xx_task.c
+++ b/drivers/scsi/aic94xx/aic94xx_task.c
@@ -373,10 +373,10 @@ static int asd_build_ata_ascb(struct asd_ascb *ascb, struct sas_task *task,
 
 	if (unlikely(task->ata_task.device_control_reg_update))
 		scb->header.opcode = CONTROL_ATA_DEV;
-	else if (dev->sata_dev.command_set == ATA_COMMAND_SET)
-		scb->header.opcode = INITIATE_ATA_TASK;
-	else
+	else if (dev->sata_dev.class == ATA_DEV_ATAPI)
 		scb->header.opcode = INITIATE_ATAPI_TASK;
+	else
+		scb->header.opcode = INITIATE_ATA_TASK;
 
 	scb->ata_task.proto_conn_rate = (1 << 5); /* STP */
 	if (dev->port->oob_mode == SAS_OOB_MODE)
@@ -387,7 +387,7 @@ static int asd_build_ata_ascb(struct asd_ascb *ascb, struct sas_task *task,
 	if (likely(!task->ata_task.device_control_reg_update))
 		scb->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
 	scb->ata_task.fis.flags &= 0xF0; /* PM_PORT field shall be 0 */
-	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+	if (dev->sata_dev.class == ATA_DEV_ATAPI)
 		memcpy(scb->ata_task.atapi_packet, task->ata_task.atapi_packet,
 		       16);
 	scb->ata_task.sister_scb = cpu_to_le16(0xFFFF);
@@ -399,7 +399,7 @@ static int asd_build_ata_ascb(struct asd_ascb *ascb, struct sas_task *task,
 		if (task->ata_task.dma_xfer)
 			flags |= DATA_XFER_MODE_DMA;
 		if (task->ata_task.use_ncq &&
-		    dev->sata_dev.command_set != ATAPI_COMMAND_SET)
+		    dev->sata_dev.class != ATA_DEV_ATAPI)
 			flags |= ATA_Q_TYPE_NCQ;
 		flags |= data_dir_flags[task->data_dir];
 		scb->ata_task.ata_flags = flags;
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 56e3809..cfd0084 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -694,7 +694,7 @@ sci_io_request_construct_sata(struct isci_request *ireq,
 	}
 
 	/* ATAPI */
-	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET &&
+	if (dev->sata_dev.class == ATA_DEV_ATAPI &&
 	    task->ata_task.fis.command == ATA_CMD_PACKET) {
 		sci_atapi_construct(ireq);
 		return SCI_SUCCESS;
@@ -2980,7 +2980,7 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm)
 		state = SCI_REQ_SMP_WAIT_RESP;
 	} else if (task && sas_protocol_ata(task->task_proto) &&
 		   !task->ata_task.use_ncq) {
-		if (dev->sata_dev.command_set == ATAPI_COMMAND_SET &&
+		if (dev->sata_dev.class == ATA_DEV_ATAPI &&
 			task->ata_task.fis.command == ATA_CMD_PACKET) {
 			state = SCI_REQ_ATAPI_WAIT_H2D;
 		} else if (task->data_dir == DMA_NONE) {
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 766098a..9f68db7 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -138,7 +138,7 @@ static void sas_ata_task_done(struct sas_task *task)
 
 	if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
 	    ((stat->stat == SAM_STAT_CHECK_CONDITION &&
-	      dev->sata_dev.command_set == ATAPI_COMMAND_SET))) {
+	      dev->sata_dev.class == ATA_DEV_ATAPI))) {
 		memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
 
 		if (!link->sactive) {
@@ -278,7 +278,7 @@ static struct sas_internal *dev_to_sas_internal(struct domain_device *dev)
 	return to_sas_internal(dev->port->ha->core.shost->transportt);
 }
 
-static void sas_get_ata_command_set(struct domain_device *dev);
+static int sas_get_ata_command_set(struct domain_device *dev);
 
 int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
 {
@@ -303,8 +303,7 @@ int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
 		}
 		memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis,
 		       sizeof(struct dev_to_host_fis));
-		/* TODO switch to ata_dev_classify() */
-		sas_get_ata_command_set(dev);
+		dev->sata_dev.class = sas_get_ata_command_set(dev);
 	}
 	return 0;
 }
@@ -425,18 +424,7 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class,
 	if (ret && ret != -EAGAIN)
 		sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret);
 
-	/* XXX: if the class changes during the reset the upper layer
-	 * should be informed, if the device has gone away we assume
-	 * libsas will eventually delete it
-	 */
-	switch (dev->sata_dev.command_set) {
-	case ATA_COMMAND_SET:
-		*class = ATA_DEV_ATA;
-		break;
-	case ATAPI_COMMAND_SET:
-		*class = ATA_DEV_ATAPI;
-		break;
-	}
+	*class = dev->sata_dev.class;
 
 	ap->cbl = ATA_CBL_SATA;
 	return ret;
@@ -626,50 +614,18 @@ void sas_ata_task_abort(struct sas_task *task)
 	complete(waiting);
 }
 
-static void sas_get_ata_command_set(struct domain_device *dev)
+static int sas_get_ata_command_set(struct domain_device *dev)
 {
 	struct dev_to_host_fis *fis =
 		(struct dev_to_host_fis *) dev->frame_rcvd;
+	struct ata_taskfile tf;
 
 	if (dev->dev_type == SAS_SATA_PENDING)
-		return;
+		return ATA_DEV_UNKNOWN;
+
+	ata_tf_from_fis((const u8 *)fis, &tf);
 
-	if ((fis->sector_count == 1 && /* ATA */
-	     fis->lbal         == 1 &&
-	     fis->lbam         == 0 &&
-	     fis->lbah         == 0 &&
-	     fis->device       == 0)
-	    ||
-	    (fis->sector_count == 0 && /* CE-ATA (mATA) */
-	     fis->lbal         == 0 &&
-	     fis->lbam         == 0xCE &&
-	     fis->lbah         == 0xAA &&
-	     (fis->device & ~0x10) == 0))
-
-		dev->sata_dev.command_set = ATA_COMMAND_SET;
-
-	else if ((fis->interrupt_reason == 1 &&	/* ATAPI */
-		  fis->lbal             == 1 &&
-		  fis->byte_count_low   == 0x14 &&
-		  fis->byte_count_high  == 0xEB &&
-		  (fis->device & ~0x10) == 0))
-
-		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
-
-	else if ((fis->sector_count == 1 && /* SEMB */
-		  fis->lbal         == 1 &&
-		  fis->lbam         == 0x3C &&
-		  fis->lbah         == 0xC3 &&
-		  fis->device       == 0)
-		||
-		 (fis->interrupt_reason == 1 &&	/* SATA PM */
-		  fis->lbal             == 1 &&
-		  fis->byte_count_low   == 0x69 &&
-		  fis->byte_count_high  == 0x96 &&
-		  (fis->device & ~0x10) == 0))
-
-		/* Treat it as a superset? */
-		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+	return ata_dev_classify(&tf);
 }
 
 void sas_probe_sata(struct asd_sas_port *port)
@@ -775,7 +731,7 @@ int sas_discover_sata(struct domain_device *dev)
 	if (dev->dev_type == SAS_SATA_PM)
 		return -ENODEV;
 
-	sas_get_ata_command_set(dev);
+	dev->sata_dev.class = sas_get_ata_command_set(dev);
 	sas_fill_in_rphy(dev, dev->rphy);
 
 	res = sas_notify_lldd_dev_found(dev);
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index ac52f7c..48a493c 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -479,7 +479,7 @@ static int mvs_task_prep_ata(struct mvs_info *mvi,
 
 	if (task->ata_task.use_ncq)
 		flags |= MCH_FPDMA;
-	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) {
+	if (dev->sata_dev.class == ATA_DEV_ATAPI) {
 		if (task->ata_task.fis.command != ATA_CMD_ID_ATAPI)
 			flags |= MCH_ATAPI;
 	}
@@ -546,7 +546,7 @@ static int mvs_task_prep_ata(struct mvs_info *mvi,
 		task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
 	/* fill in command FIS and ATAPI CDB */
 	memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
-	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+	if (dev->sata_dev.class == ATA_DEV_ATAPI)
 		memcpy(buf_cmd + STP_ATAPI_CMD,
 			task->ata_task.atapi_packet, 16);
 
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 933f214..96dcc09 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -4367,7 +4367,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 			PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
 		}
 		if (task->ata_task.use_ncq &&
-			dev->sata_dev.command_set != ATAPI_COMMAND_SET) {
+			dev->sata_dev.class != ATA_DEV_ATAPI) {
 			ATAP = 0x07; /* FPDMA */
 			PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
 		}
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index b06443a..05cce46 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4077,7 +4077,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 			PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
 		}
 		if (task->ata_task.use_ncq &&
-			dev->sata_dev.command_set != ATAPI_COMMAND_SET) {
+		    dev->sata_dev.class != ATA_DEV_ATAPI) {
 			ATAP = 0x07; /* FPDMA */
 			PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
 		}
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index ef7872c..8528a09 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -161,17 +161,12 @@ struct expander_device {
 };
 
 /* ---------- SATA device ---------- */
-enum ata_command_set {
-        ATA_COMMAND_SET   = 0,
-        ATAPI_COMMAND_SET = 1,
-};
-
 #define ATA_RESP_FIS_SIZE 24
 
 struct sata_device {
-        enum   ata_command_set command_set;
-        struct smp_resp        rps_resp; /* report_phy_sata_resp */
-        u8     port_no;        /* port number, if this is a PM (Port) */
+	unsigned int class;
+	struct smp_resp        rps_resp; /* report_phy_sata_resp */
+	u8     port_no;        /* port number, if this is a PM (Port) */
 
 	struct ata_port *ap;
 	struct ata_host ata_host;
-- 
1.8.5.2

[PATCH 2/3] libata: Implement ATA_DEV_ZAC

[Hannes Reinecke]

Add new ATA device type for ZAC devices.

Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/ata/libata-core.c      | 20 ++++++++++++++------
 drivers/ata/libata-eh.c        |  7 +++++--
 drivers/ata/libata-scsi.c      |  5 +++--
 drivers/ata/libata-transport.c |  1 +
 include/linux/libata.h         |  6 ++++--
 5 files changed, 27 insertions(+), 12 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c5ba15a..5c84fb5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1043,8 +1043,8 @@ const char *sata_spd_string(unsigned int spd)
  *	None.
  *
  *	RETURNS:
- *	Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP or
- *	%ATA_DEV_UNKNOWN the event of failure.
+ *	Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP,
+ *	%ATA_DEV_ZAC, or %ATA_DEV_UNKNOWN the event of failure.
  */
 unsigned int ata_dev_classify(const struct ata_taskfile *tf)
 {
@@ -1089,6 +1089,11 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf)
 		return ATA_DEV_SEMB;
 	}
 
+	if ((tf->lbam == 0xcd) && (tf->lbah == 0xab)) {
+		DPRINTK("found ZAC device by sig\n");
+		return ATA_DEV_ZAC;
+	}
+
 	DPRINTK("unknown device\n");
 	return ATA_DEV_UNKNOWN;
 }
@@ -1329,7 +1334,7 @@ static int ata_hpa_resize(struct ata_device *dev)
 	int rc;
 
 	/* do we need to do it? */
-	if (dev->class != ATA_DEV_ATA ||
+	if ((dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC) ||
 	    !ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) ||
 	    (dev->horkage & ATA_HORKAGE_BROKEN_HPA))
 		return 0;
@@ -1889,6 +1894,7 @@ retry:
 	case ATA_DEV_SEMB:
 		class = ATA_DEV_ATA;	/* some hard drives report SEMB sig */
 	case ATA_DEV_ATA:
+	case ATA_DEV_ZAC:
 		tf.command = ATA_CMD_ID_ATA;
 		break;
 	case ATA_DEV_ATAPI:
@@ -1980,7 +1986,7 @@ retry:
 	rc = -EINVAL;
 	reason = "device reports invalid type";
 
-	if (class == ATA_DEV_ATA) {
+	if (class == ATA_DEV_ATA || class == ATA_DEV_ZAC) {
 		if (!ata_id_is_ata(id) && !ata_id_is_cfa(id))
 			goto err_out;
 		if (ap->host->flags & ATA_HOST_IGNORE_ATA &&
@@ -2015,7 +2021,8 @@ retry:
 			goto retry;
 	}
 
-	if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) {
+	if ((flags & ATA_READID_POSTRESET) &&
+	    (class == ATA_DEV_ATA || class == ATA_DEV_ZAC)) {
 		/*
 		 * The exact sequence expected by certain pre-ATA4 drives is:
 		 * SRST RESET
@@ -2280,7 +2287,7 @@ int ata_dev_configure(struct ata_device *dev)
 			sizeof(modelbuf));
 
 	/* ATA-specific feature tests */
-	if (dev->class == ATA_DEV_ATA) {
+	if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
 		if (ata_id_is_cfa(id)) {
 			/* CPRM may make this media unusable */
 			if (id[ATA_ID_CFA_KEY_MGMT] & 1)
@@ -4033,6 +4040,7 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 	if (ata_class_enabled(new_class) &&
 	    new_class != ATA_DEV_ATA &&
 	    new_class != ATA_DEV_ATAPI &&
+	    new_class != ATA_DEV_ZAC &&
 	    new_class != ATA_DEV_SEMB) {
 		ata_dev_info(dev, "class mismatch %u != %u\n",
 			     dev->class, new_class);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index dad83df..3dbec89 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1809,6 +1809,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 
 	switch (qc->dev->class) {
 	case ATA_DEV_ATA:
+	case ATA_DEV_ZAC:
 		if (err & ATA_ICRC)
 			qc->err_mask |= AC_ERR_ATA_BUS;
 		if (err & (ATA_UNC | ATA_AMNF))
@@ -3792,7 +3793,8 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 				struct ata_eh_context *ehc = &link->eh_context;
 				unsigned long tmp;
 
-				if (dev->class != ATA_DEV_ATA)
+				if (dev->class != ATA_DEV_ATA &&
+				    dev->class != ATA_DEV_ZAC)
 					continue;
 				if (!(ehc->i.dev_action[dev->devno] &
 				      ATA_EH_PARK))
@@ -3873,7 +3875,8 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 
 		/* retry flush if necessary */
 		ata_for_each_dev(dev, link, ALL) {
-			if (dev->class != ATA_DEV_ATA)
+			if (dev->class != ATA_DEV_ATA &&
+			    dev->class != ATA_DEV_ZAC)
 				continue;
 			rc = ata_eh_maybe_retry_flush(dev);
 			if (rc)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0586f66..bea6e7f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -235,7 +235,8 @@ static ssize_t ata_scsi_park_store(struct device *device,
 		rc = -ENODEV;
 		goto unlock;
 	}
-	if (dev->class != ATA_DEV_ATA) {
+	if (dev->class != ATA_DEV_ATA &&
+	    dev->class != ATA_DEV_ZAC) {
 		rc = -EOPNOTSUPP;
 		goto unlock;
 	}
@@ -3412,7 +3413,7 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
 	ata_xlat_func_t xlat_func;
 	int rc = 0;
 
-	if (dev->class == ATA_DEV_ATA) {
+	if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
 		if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len))
 			goto bad_cdb_len;
 
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index e37413228..3227b7c 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -143,6 +143,7 @@ static struct {
 	{ ATA_DEV_PMP_UNSUP,		"pmp" },
 	{ ATA_DEV_SEMB,			"semb" },
 	{ ATA_DEV_SEMB_UNSUP,		"semb" },
+	{ ATA_DEV_ZAC,			"zac" },
 	{ ATA_DEV_NONE,			"none" }
 };
 ata_bitfield_name_search(class, ata_class_names)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index bd5fefe..a26daea 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -191,7 +191,8 @@ enum {
 	ATA_DEV_PMP_UNSUP	= 6,	/* SATA port multiplier (unsupported) */
 	ATA_DEV_SEMB		= 7,	/* SEMB */
 	ATA_DEV_SEMB_UNSUP	= 8,	/* SEMB (unsupported) */
-	ATA_DEV_NONE		= 9,	/* no device */
+	ATA_DEV_ZAC		= 9,	/* ZAC device */
+	ATA_DEV_NONE		= 10,	/* no device */
 
 	/* struct ata_link flags */
 	ATA_LFLAG_NO_HRST	= (1 << 1), /* avoid hardreset */
@@ -1491,7 +1492,8 @@ static inline unsigned int ata_tag_internal(unsigned int tag)
 static inline unsigned int ata_class_enabled(unsigned int class)
 {
 	return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI ||
-		class == ATA_DEV_PMP || class == ATA_DEV_SEMB;
+		class == ATA_DEV_PMP || class == ATA_DEV_SEMB ||
+		class == ATA_DEV_ZAC;
 }
 
 static inline unsigned int ata_class_disabled(unsigned int class)
-- 
1.8.5.2

[PATCH 3/3] libata-scsi: Update SATL for ZAC drives

[Hannes Reinecke]

ZAC (zoned-access command) drives translate into ZBC (Zoned block
command) device type for SCSI. So implement the correct mappings
into libata-scsi and update the SCSI command set versions.

Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/ata/libata-scsi.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index bea6e7f..1db6eab 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1969,6 +1969,7 @@ static void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
 static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
 {
 	const u8 versions[] = {
+		0x00,
 		0x60,	/* SAM-3 (no version claimed) */
 
 		0x03,
@@ -1977,6 +1978,20 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
 		0x02,
 		0x60	/* SPC-3 (no version claimed) */
 	};
+	const u8 versions_zbc[] = {
+		0x00,
+		0xA0,	/* SAM-5 (no version claimed) */
+
+		0x04,
+		0xC0,	/* SBC-3 (no version claimed) */
+
+		0x04,
+		0x60,	/* SPC-4 (no version claimed) */
+
+		0x60,
+		0x20,   /* ZBC (no version claimed) */
+	};
+
 	u8 hdr[] = {
 		TYPE_DISK,
 		0,
@@ -1991,6 +2006,11 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
 	if (ata_id_removeable(args->id))
 		hdr[1] |= (1 << 7);
 
+	if (args->dev->class == ATA_DEV_ZAC) {
+		hdr[0] = TYPE_ZBC;
+		hdr[2] = 0x6; /* ZBC is defined in SPC-4 */
+	}
+
 	memcpy(rbuf, hdr, sizeof(hdr));
 	memcpy(&rbuf[8], "ATA     ", 8);
 	ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16);
@@ -2003,7 +2023,10 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
 	if (rbuf[32] == 0 || rbuf[32] == ' ')
 		memcpy(&rbuf[32], "n/a ", 4);
 
-	memcpy(rbuf + 59, versions, sizeof(versions));
+	if (args->dev->class == ATA_DEV_ZAC)
+		memcpy(rbuf + 58, versions_zbc, sizeof(versions_zbc));
+	else
+		memcpy(rbuf + 58, versions, sizeof(versions));
 
 	return 0;
 }
-- 
1.8.5.2

Re: [PATCHv2 0/3] Initial ZAC support

[Christoph Hellwig]

On Wed, Nov 05, 2014 at 01:08:19PM +0100, Hannes Reinecke wrote:
> Hi all,
> 
> this patchset updates the ATA stack to correctly detect
> host-managed ZAC devices.

And more importantly exports /dev/sg nodes from them so they can be
actually be accessed.

I'm fine with taking the whole series through the libata tree, so far
there are no conflicting libsas changes on the radar.

Re: [PATCHv2 0/3] Initial ZAC support

[Hannes Reinecke]

On 11/05/2014 04:03 PM, Christoph Hellwig wrote:
> On Wed, Nov 05, 2014 at 01:08:19PM +0100, Hannes Reinecke wrote:
>> Hi all,
>>
>> this patchset updates the ATA stack to correctly detect
>> host-managed ZAC devices.
> 
> And more importantly exports /dev/sg nodes from them so they can be
> actually be accessed.
> 
> I'm fine with taking the whole series through the libata tree, so far
> there are no conflicting libsas changes on the radar.
> 
Tejun?
I've made the requested changes of using taskfiles in libsas,
so everything should be fine now ...

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv2 0/3] Initial ZAC support

[Tejun Heo]

On Wed, Nov 05, 2014 at 01:08:19PM +0100, Hannes Reinecke wrote:
> Hi all,
> 
> this patchset updates the ATA stack to correctly detect
> host-managed ZAC devices.
> 
> Hannes Reinecke (3):
>   libsas: use ata_dev_classify()
>   libata: Implement ATA_DEV_ZAC
>   libata-scsi: Update SATL for ZAC drives

Applied 1-3 to libata/for-3.19.

Thanks.

-- 
tejun