From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
Matthew Dharm <mdharm-usb@one-eyed-alien.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>,
Christoph Hellwig <hch@lst.de>,
"James E.J. Bottomley" <JBottomley@parallels.com>,
linux-usb@vger.kernel.org, usb-storage@lists.one-eyed-alien.net
Subject: [PATCH v2 3/3] usb: storage: adjust module reference for scsi host
Date: Wed, 7 Jan 2015 23:03:02 +0900 [thread overview]
Message-ID: <1420639382-2219-4-git-send-email-akinobu.mita@gmail.com> (raw)
In-Reply-To: <1420639382-2219-1-git-send-email-akinobu.mita@gmail.com>
While accessing a unusual usb storage (ums-alauda, ums-cypress, ...),
the module reference count is not incremented. Because these drivers
allocate scsi hosts with usb_stor_host_template defined in usb-storage
module. So these drivers always can be unloaded.
This fixes it by passing correct module reference to usb_stor_probe1() to
adjust it after scsi host allocation.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-usb@vger.kernel.org
Cc: usb-storage@lists.one-eyed-alien.net
Cc: linux-scsi@vger.kernel.org
---
* v2:
- Pass correct module reference to usb_stor_probe1() instead of touching
all ums-* drivers, suggested by Alan Stern
drivers/usb/storage/usb.c | 8 +++++---
drivers/usb/storage/usb.h | 7 +++++--
2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index d468d02..3bb2558 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -911,10 +911,11 @@ static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
}
/* First part of general USB mass-storage probing */
-int usb_stor_probe1(struct us_data **pus,
+int __usb_stor_probe1(struct us_data **pus,
struct usb_interface *intf,
const struct usb_device_id *id,
- struct us_unusual_dev *unusual_dev)
+ struct us_unusual_dev *unusual_dev,
+ struct module *owner)
{
struct Scsi_Host *host;
struct us_data *us;
@@ -937,6 +938,7 @@ int usb_stor_probe1(struct us_data **pus,
*/
host->max_cmd_len = 16;
host->sg_tablesize = usb_stor_sg_tablesize(intf);
+ host->module = owner;
*pus = us = host_to_us(host);
mutex_init(&(us->dev_mutex));
us_set_lock_class(&us->dev_mutex, intf);
@@ -969,7 +971,7 @@ BadDevice:
release_everything(us);
return result;
}
-EXPORT_SYMBOL_GPL(usb_stor_probe1);
+EXPORT_SYMBOL_GPL(__usb_stor_probe1);
/* Second part of general USB mass-storage probing */
int usb_stor_probe2(struct us_data *us)
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 307e339..0cb74ba 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -194,10 +194,13 @@ extern int usb_stor_reset_resume(struct usb_interface *iface);
extern int usb_stor_pre_reset(struct usb_interface *iface);
extern int usb_stor_post_reset(struct usb_interface *iface);
-extern int usb_stor_probe1(struct us_data **pus,
+extern int __usb_stor_probe1(struct us_data **pus,
struct usb_interface *intf,
const struct usb_device_id *id,
- struct us_unusual_dev *unusual_dev);
+ struct us_unusual_dev *unusual_dev,
+ struct module *owner);
+#define usb_stor_probe1(pus, intf, id, unusual_dev) \
+ __usb_stor_probe1(pus, intf, id, unusual_dev, THIS_MODULE)
extern int usb_stor_probe2(struct us_data *us);
extern void usb_stor_disconnect(struct usb_interface *intf);
--
1.9.1
next prev parent reply other threads:[~2015-01-07 14:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-07 14:02 [PATCH v2 0/3] scsi: ufs & ums-*: fix module reference counting Akinobu Mita
2015-01-07 14:03 ` [PATCH v2 1/3] scsi: add ability to adjust module reference for scsi host Akinobu Mita
2015-01-07 14:03 ` [PATCH v2 2/3] scsi: ufs: " Akinobu Mita
2015-01-07 14:03 ` Akinobu Mita [this message]
[not found] ` <1420639382-2219-4-git-send-email-akinobu.mita-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-01-07 15:04 ` [PATCH v2 3/3] usb: storage: " Alan Stern
2015-01-07 14:28 ` [PATCH v2 0/3] scsi: ufs & ums-*: fix module reference counting Christoph Hellwig
[not found] ` <20150107142830.GA659-jcswGhMUV9g@public.gmane.org>
2015-01-07 15:09 ` Alan Stern
2015-01-08 14:00 ` Akinobu Mita
2015-01-08 15:13 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420639382-2219-4-git-send-email-akinobu.mita@gmail.com \
--to=akinobu.mita@gmail.com \
--cc=JBottomley@parallels.com \
--cc=gregkh@linuxfoundation.org \
--cc=hch@lst.de \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mdharm-usb@one-eyed-alien.net \
--cc=stern@rowland.harvard.edu \
--cc=usb-storage@lists.one-eyed-alien.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).