[PATCH 1/2] uas: Do not blacklist ASM1153 disk enclosures

[PATCH 1/2] uas: Do not blacklist ASM1153 disk enclosures

[Hans de Goede]

Our detection logic to avoid doing UAS on ASM1051 bridge chips causes problems
with newer ASM1153 disk enclosures in 2 ways:

1) Some ASM1153 disk enclosures re-use the ASM1051 device-id of 5106, which
   we assume is always an ASM1051, so remove the quirk for 5106, and instead
   use the same detection logic as we already use for device-id 55aa, which is
   used for all of ASM1051, ASM1053 and ASM1153 devices <sigh>.

2) Our detection logic to differentiate between ASM1051 and ASM1053 sees
   ASM1153 devices as ASM1051 because they have 32 streams like ASM1051 devs.
   Luckily the ASM1153 descriptors are not 100% identical, unlike the previous
   models the ASM1153 has bMaxPower == 0, so use that to differentiate it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/usb/storage/uas-detect.h  | 33 ++++++++++++++++++++++++++++-----
 drivers/usb/storage/unusual_uas.h |  8 --------
 2 files changed, 28 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h
index 8a6f371..9893d69 100644
--- a/drivers/usb/storage/uas-detect.h
+++ b/drivers/usb/storage/uas-detect.h
@@ -69,16 +69,39 @@ static int uas_use_uas_driver(struct usb_interface *intf,
 		return 0;
 
 	/*
-	 * ASM1051 and older ASM1053 devices have the same usb-id, and UAS is
-	 * broken on the ASM1051, use the number of streams to differentiate.
-	 * New ASM1053-s also support 32 streams, but have a different prod-id.
+	 * ASMedia has a number of usb3 to sata bridge chips, at the time of
+	 * this writing the following versions exist:
+	 * ASM1051 - no uas support version
+	 * ASM1051 - with broken (*) uas support
+	 * ASM1053 - with working uas support
+	 * ASM1153 - with working uas support
+	 *
+	 * Devices with these chips re-use a number of device-ids over the
+	 * entire line, so the device-id is useless to determine if we're
+	 * dealing with an ASM1051 (which we want to avoid).
+	 *
+	 * The ASM1153 can be identified by config.MaxPower == 0,
+	 * where as the ASM105x models have config.MaxPower == 36.
+	 *
+	 * Differentiating between the ASM1053 and ASM1051 is trickier, when
+	 * connected over USB-3 we can look at the number of streams supported,
+	 * ASM1051 supports 32 streams, where as early ASM1053 versions support
+	 * 16 streams, newer ASM1053-s also support 32 streams, but have a
+	 * different prod-id.
+	 *
+	 * (*) ASM1051 chips do work with UAS with some disks (with the
+	 *     US_FL_NO_REPORT_OPCODES quirk), but are broken with other disks
 	 */
 	if (le16_to_cpu(udev->descriptor.idVendor) == 0x174c &&
-			le16_to_cpu(udev->descriptor.idProduct) == 0x55aa) {
-		if (udev->speed < USB_SPEED_SUPER) {
+			(le16_to_cpu(udev->descriptor.idProduct) == 0x5106 ||
+			 le16_to_cpu(udev->descriptor.idProduct) == 0x55aa)) {
+		if (udev->actconfig->desc.bMaxPower == 0) {
+			/* ASM1153, do nothing */
+		} else if (udev->speed < USB_SPEED_SUPER) {
 			/* No streams info, assume ASM1051 */
 			flags |= US_FL_IGNORE_UAS;
 		} else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
+			/* Possibly an ASM1051, disable uas */
 			flags |= US_FL_IGNORE_UAS;
 		}
 	}
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 2f0a3d3..f8492c1 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -96,14 +96,6 @@ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_REPORT_OPCODES),
 
-/* Most ASM1051 based devices have issues with uas, blacklist them all */
-/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
-UNUSUAL_DEV(0x174c, 0x5106, 0x0000, 0x9999,
-		"ASMedia",
-		"ASM1051",
-		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_IGNORE_UAS),
-
 /* Reported-by: Hans de Goede <hdegoede@redhat.com> */
 UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
 		"VIA",
-- 
2.1.0

[PATCH 2/2] uas: Add US_FL_NO_ATA_1X for 2 more Seagate disk enclosures

[Hans de Goede]

Just like all previous UAS capable Seagate disk enclosures, these need the
US_FL_NO_ATA_1X to not crash when udev probes them.

Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/usb/storage/unusual_uas.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index f8492c1..9ec4561 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -75,6 +75,13 @@ UNUSUAL_DEV(0x0bc2, 0xa013, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_ATA_1X),
 
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x0bc2, 0xa0a4, 0x0000, 0x9999,
+		"Seagate",
+		"Backup Plus Desk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
 /* https://bbs.archlinux.org/viewtopic.php?id=183190 */
 UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999,
 		"Seagate",
@@ -89,6 +96,13 @@ UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_ATA_1X),
 
+/* Reported-by: G. Richard Bellamy <rbellamy@pteradigm.com> */
+UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999,
+		"Seagate",
+		"BUP Fast HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
 /* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
 UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
 		"JMicron",
-- 
2.1.0