From: Ondrej Zary <linux@rainbow-software.org>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 11/34] atp870u: Untangle tmpcip
Date: Sun, 3 May 2015 19:31:27 +0200 [thread overview]
Message-ID: <1430674310-11576-12-git-send-email-linux@rainbow-software.org> (raw)
In-Reply-To: <1430674310-11576-1-git-send-email-linux@rainbow-software.org>
Untangle the tmpcip crap so it becomes obvious what ports are accessed.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/atp870u.c | 64 +++++++++++++++++-------------------------------
1 file changed, 23 insertions(+), 41 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 2b8ae0d..d7a8763 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -47,7 +47,7 @@ static void tscam_885(void);
static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
{
unsigned long flags;
- unsigned short int tmpcip, id;
+ unsigned short int id;
unsigned char i, j, c, target_id, lun,cmdp;
unsigned char *prd;
struct scsi_cmnd *workreq;
@@ -79,30 +79,24 @@ ch_sel:
if ((inb(dev->ioport[c] + 0x16) & 0x80) == 0)
outb((inb(dev->ioport[c] + 0x16) | 0x80), dev->ioport[c] + 0x16);
}
- tmpcip = dev->pciport[c];
- if ((inb(tmpcip) & 0x08) != 0)
+ if ((inb(dev->pciport[c]) & 0x08) != 0)
{
- tmpcip += 0x2;
for (k=0; k < 1000; k++) {
- if ((inb(tmpcip) & 0x08) == 0) {
+ if ((inb(dev->pciport[c] + 2) & 0x08) == 0) {
goto stop_dma;
}
- if ((inb(tmpcip) & 0x01) == 0) {
+ if ((inb(dev->pciport[c] + 2) & 0x01) == 0) {
goto stop_dma;
}
}
}
stop_dma:
- tmpcip = dev->pciport[c];
- outb(0x00, tmpcip);
+ outb(0x00, dev->pciport[c]);
i = inb(dev->ioport[c] + 0x17);
- if (dev->dev_id == ATP885_DEVID) {
- tmpcip += 2;
- outb(0x06, tmpcip);
- tmpcip -= 2;
- }
+ if (dev->dev_id == ATP885_DEVID)
+ outb(0x06, dev->pciport[c] + 2);
target_id = inb(dev->ioport[c] + 0x15);
@@ -303,13 +297,12 @@ stop_dma:
/* enable 32 bit fifo transfer */
if (dev->dev_id == ATP885_DEVID) {
- tmpcip = dev->pciport[c] + 1;
- i=inb(tmpcip) & 0xf3;
+ i=inb(dev->pciport[c] + 1) & 0xf3;
//j=workreq->cmnd[0];
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
i |= 0x0c;
}
- outb(i,tmpcip);
+ outb(i, dev->pciport[c] + 1);
} else if ((dev->dev_id == ATP880_DEVID1) ||
(dev->dev_id == ATP880_DEVID2) ) {
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
@@ -371,25 +364,20 @@ stop_dma:
}
}
}
- tmpcip = dev->pciport[c] + 0x04;
- outl(dev->id[c][target_id].prdaddr, tmpcip);
+ outl(dev->id[c][target_id].prdaddr, dev->pciport[c] + 0x04);
#ifdef ED_DBGP
printk("dev->id[%d][%d].prdaddr 0x%8x\n", c, target_id, dev->id[c][target_id].prdaddr);
#endif
- if (dev->dev_id == ATP885_DEVID) {
- tmpcip -= 0x04;
- } else {
- tmpcip -= 0x02;
- outb(0x06, tmpcip);
- outb(0x00, tmpcip);
- tmpcip -= 0x02;
+ if (dev->dev_id != ATP885_DEVID) {
+ outb(0x06, dev->pciport[c] + 2);
+ outb(0x00, dev->pciport[c] + 2);
}
/*
* Check transfer direction
*/
if (dev->id[c][target_id].dirct != 0) {
outb(0x08, dev->ioport[c] + 0x18);
- outb(0x01, tmpcip);
+ outb(0x01, dev->pciport[c]);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("status 0x80 return dirct != 0\n");
@@ -397,7 +385,7 @@ stop_dma:
goto handled;
}
outb(0x08, dev->ioport[c] + 0x18);
- outb(0x09, tmpcip);
+ outb(0x09, dev->pciport[c]);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("status 0x80 return dirct = 0\n");
@@ -484,12 +472,9 @@ go_42:
}
i &= 0x0f;
if (i == 0x09) {
- tmpcip += 4;
- outl(dev->id[c][target_id].prdaddr, tmpcip);
- tmpcip = tmpcip - 2;
- outb(0x06, tmpcip);
- outb(0x00, tmpcip);
- tmpcip = tmpcip - 2;
+ outl(dev->id[c][target_id].prdaddr, dev->pciport[c] + 4);
+ outb(0x06, dev->pciport[c] + 2);
+ outb(0x00, dev->pciport[c] + 2);
outb(0x41, dev->ioport[c] + 0x10);
if (dev->dev_id == ATP885_DEVID) {
k = dev->id[c][target_id].last_len;
@@ -501,17 +486,14 @@ go_42:
dev->id[c][target_id].dirct = 0x00;
}
outb(0x08, dev->ioport[c] + 0x18);
- outb(0x09, tmpcip);
+ outb(0x09, dev->pciport[c]);
dev->in_int[c] = 0;
goto handled;
}
if (i == 0x08) {
- tmpcip += 4;
- outl(dev->id[c][target_id].prdaddr, tmpcip);
- tmpcip = tmpcip - 2;
- outb(0x06, tmpcip);
- outb(0x00, tmpcip);
- tmpcip = tmpcip - 2;
+ outl(dev->id[c][target_id].prdaddr, dev->pciport[c] + 4);
+ outb(0x06, dev->pciport[c] + 2);
+ outb(0x00, dev->pciport[c] + 2);
outb(0x41, dev->ioport[c] + 0x10);
if (dev->dev_id == ATP885_DEVID) {
k = dev->id[c][target_id].last_len;
@@ -522,7 +504,7 @@ go_42:
outb((unsigned char) (inb(dev->ioport[c] + 0x15) | 0x20), dev->ioport[c] + 0x15);
dev->id[c][target_id].dirct = 0x20;
outb(0x08, dev->ioport[c] + 0x18);
- outb(0x01, tmpcip);
+ outb(0x01, dev->pciport[c]);
dev->in_int[c] = 0;
goto handled;
}
--
Ondrej Zary
next prev parent reply other threads:[~2015-05-03 17:52 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-03 17:31 [RFC PATCH 00/34] atp870u: Remove the first level of crap Ondrej Zary
2015-05-03 17:31 ` [PATCH 01/34] atp870u: Remove workport Ondrej Zary
2015-05-03 17:31 ` [PATCH 02/34] atp870u: Remove tmport1 Ondrej Zary
2015-05-03 17:31 ` [PATCH 03/34] atp870u: Untangle tmport Ondrej Zary
2015-05-03 17:31 ` [PATCH 04/34] atp870u: Untangle tmport #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 05/34] atp870u: Untangle tmport #3 Ondrej Zary
2015-05-03 17:31 ` [PATCH 06/34] atp870u: Untangle tmport #4 Ondrej Zary
2015-05-03 17:31 ` [PATCH 07/34] atp870u: Untangle tmport #5 Ondrej Zary
2015-05-03 17:31 ` [PATCH 08/34] atp870u: Untangle tmport #6 Ondrej Zary
2015-05-03 17:31 ` [PATCH 09/34] atp870u: Untangle tmport #7 Ondrej Zary
2015-05-03 17:31 ` [PATCH 10/34] atp870u: Untangle tmport #8 Ondrej Zary
2015-05-03 17:31 ` Ondrej Zary [this message]
2015-05-03 17:31 ` [PATCH 12/34] atp870u: Untangle tmpcip #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 13/34] atp870u: Remove ugly gotos Ondrej Zary
2015-05-03 17:31 ` [PATCH 14/34] atp870u: Remove ugly gotos #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 15/34] atp870u: Remove ugly gotos #3 Ondrej Zary
2015-05-03 17:31 ` [PATCH 16/34] atp870u: Remove ugly gotos #4 Ondrej Zary
2015-05-03 17:31 ` [PATCH 17/34] atp870u: Remove ugly gotos #5 Ondrej Zary
2015-05-03 17:31 ` [PATCH 18/34] atp870u: Introduce HW access wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 19/34] atp870u: Convert is870() to use wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 20/34] atp870u: Convert is880() " Ondrej Zary
2015-05-03 17:31 ` [PATCH 21/34] atp870u: Convert is885() " Ondrej Zary
2015-05-03 17:31 ` [PATCH 22/34] atp870u: Unify code format in is870(), is880() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 23/34] atp870u: Add channel parameter to is870() and is880() Ondrej Zary
2015-05-03 17:31 ` [PATCH 24/34] atp870u: Move chip-specific lines out of is880() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 25/34] atp870u: Remove is880() Ondrej Zary
2015-05-03 17:31 ` [PATCH 26/34] atp870u: Add wide_chip parameter to is870() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 27/34] atp870u: Add remaining 870 support to is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 28/34] atp870u: Move 870-specific code out of is870() Ondrej Zary
2015-05-03 17:31 ` [PATCH 29/34] atp870u: Remove is870() Ondrej Zary
2015-05-03 17:31 ` [PATCH 30/34] atp870u: Rename is885() to atp_is() Ondrej Zary
2015-05-03 17:31 ` [PATCH 31/34] atp870u: Convert remaining in[bwl] and out[bwl] to wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 32/34] atp870u: Replace port 0x80 delay by udelay Ondrej Zary
2015-05-03 17:31 ` [PATCH 33/34] atp870u: Fix incorrect writeb_io access to register 0x3a Ondrej Zary
2015-05-03 17:31 ` [PATCH 34/34] atp870u: Introduce atp_set_host_id Ondrej Zary
2015-05-11 9:06 ` [RFC PATCH 00/34] atp870u: Remove the first level of crap Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430674310-11576-12-git-send-email-linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).