From: Ondrej Zary <linux@rainbow-software.org>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 13/34] atp870u: Remove ugly gotos
Date: Sun, 3 May 2015 19:31:29 +0200 [thread overview]
Message-ID: <1430674310-11576-14-git-send-email-linux@rainbow-software.org> (raw)
In-Reply-To: <1430674310-11576-1-git-send-email-linux@rainbow-software.org>
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/atp870u.c | 84 +++++++++++++++++-------------------------------
1 file changed, 30 insertions(+), 54 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index f902c16..88339e4 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -55,20 +55,17 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
#ifdef ED_DBGP
unsigned long l;
#endif
- int errstus;
struct Scsi_Host *host = dev_id;
struct atp_unit *dev = (struct atp_unit *)&host->hostdata;
for (c = 0; c < 2; c++) {
j = inb(dev->ioport[c] + 0x1f);
if ((j & 0x80) != 0)
- {
- goto ch_sel;
- }
+ break;
dev->in_int[c] = 0;
}
- return IRQ_NONE;
-ch_sel:
+ if ((j & 0x80) == 0)
+ return IRQ_NONE;
#ifdef ED_DBGP
printk("atp870u_intr_handle enter\n");
#endif
@@ -82,15 +79,12 @@ ch_sel:
if ((inb(dev->pciport[c]) & 0x08) != 0)
{
for (k=0; k < 1000; k++) {
- if ((inb(dev->pciport[c] + 2) & 0x08) == 0) {
- goto stop_dma;
- }
- if ((inb(dev->pciport[c] + 2) & 0x01) == 0) {
- goto stop_dma;
- }
+ if ((inb(dev->pciport[c] + 2) & 0x08) == 0)
+ break;
+ if ((inb(dev->pciport[c] + 2) & 0x01) == 0)
+ break;
}
}
-stop_dma:
outb(0x00, dev->pciport[c]);
i = inb(dev->ioport[c] + 0x17);
@@ -170,13 +164,13 @@ stop_dma:
#ifdef ED_DBGP
printk("Status 0x85 return\n");
#endif
- goto handled;
+ return IRQ_HANDLED;
}
if (i == 0x40) {
dev->last_cmd[c] |= 0x40;
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
if (i == 0x21) {
@@ -194,7 +188,7 @@ stop_dma:
outb(0x41, dev->ioport[c] + 0x10);
outb(0x08, dev->ioport[c] + 0x18);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
if (dev->dev_id == ATP885_DEVID) {
@@ -231,7 +225,7 @@ stop_dma:
dev->id[c][target_id].last_len = adrcnt;
outb(0x08, dev->ioport[c] + 0x18);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
} else {
#ifdef ED_DBGP
printk("cmdp != 0x41\n");
@@ -243,7 +237,7 @@ stop_dma:
outb(0x00, dev->ioport[c] + 0x14);
outb(0x08, dev->ioport[c] + 0x18);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
}
if (dev->last_cmd[c] != 0xff) {
@@ -336,7 +330,7 @@ stop_dma:
#ifdef ED_DBGP
printk("dev->id[c][target_id].last_len = 0\n");
#endif
- goto handled;
+ return IRQ_HANDLED;
}
#ifdef ED_DBGP
printk("target_id = %d adrcnt = %d\n",target_id,adrcnt);
@@ -382,7 +376,7 @@ stop_dma:
#ifdef ED_DBGP
printk("status 0x80 return dirct != 0\n");
#endif
- goto handled;
+ return IRQ_HANDLED;
}
outb(0x08, dev->ioport[c] + 0x18);
outb(0x09, dev->pciport[c]);
@@ -390,7 +384,7 @@ stop_dma:
#ifdef ED_DBGP
printk("status 0x80 return dirct = 0\n");
#endif
- goto handled;
+ return IRQ_HANDLED;
}
/*
@@ -399,27 +393,19 @@ stop_dma:
workreq = dev->id[c][target_id].curr_req;
- if (i == 0x42) {
- if ((dev->last_cmd[c] & 0xf0) != 0x40)
- {
- dev->last_cmd[c] = 0xff;
- }
- errstus = 0x02;
- workreq->result = errstus;
- goto go_42;
- }
- if (i == 0x16) {
+ if (i == 0x42 || i == 0x16) {
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
- errstus = 0;
- errstus = inb(dev->ioport[c] + 0x0f);
- if (((dev->r1f[c][target_id] & 0x10) != 0)&&(dev->dev_id==ATP885_DEVID)) {
- printk(KERN_WARNING "AEC67162 CRC ERROR !\n");
- errstus = 0x02;
- }
- workreq->result = errstus;
-go_42:
+ if (i == 0x16) {
+ workreq->result = inb(dev->ioport[c] + 0x0f);
+ if (((dev->r1f[c][target_id] & 0x10) != 0)&&(dev->dev_id==ATP885_DEVID)) {
+ printk(KERN_WARNING "AEC67162 CRC ERROR !\n");
+ workreq->result = 0x02;
+ }
+ } else
+ workreq->result = 0x02;
+
if (dev->dev_id == ATP885_DEVID) {
j = inb(dev->baseport + 0x29) | 0x01;
outb(j, dev->baseport + 0x29);
@@ -462,7 +448,7 @@ go_42:
}
spin_unlock_irqrestore(dev->host->host_lock, flags);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
@@ -488,7 +474,7 @@ go_42:
outb(0x08, dev->ioport[c] + 0x18);
outb(0x09, dev->pciport[c]);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
if (i == 0x08) {
outl(dev->id[c][target_id].prdaddr, dev->pciport[c] + 4);
@@ -506,7 +492,7 @@ go_42:
outb(0x08, dev->ioport[c] + 0x18);
outb(0x01, dev->pciport[c]);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
if (i == 0x0a) {
outb(0x30, dev->ioport[c] + 0x10);
@@ -518,19 +504,9 @@ go_42:
outb(0x00, dev->ioport[c] + 0x13);
outb(0x00, dev->ioport[c] + 0x14);
outb(0x08, dev->ioport[c] + 0x18);
- dev->in_int[c] = 0;
- goto handled;
- } else {
-// inb(dev->ioport[c] + 0x17);
-// dev->working[c] = 0;
- dev->in_int[c] = 0;
- goto handled;
}
-
-handled:
-#ifdef ED_DBGP
- printk("atp870u_intr_handle exit\n");
-#endif
+ dev->in_int[c] = 0;
+
return IRQ_HANDLED;
}
/**
--
Ondrej Zary
next prev parent reply other threads:[~2015-05-03 17:53 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-03 17:31 [RFC PATCH 00/34] atp870u: Remove the first level of crap Ondrej Zary
2015-05-03 17:31 ` [PATCH 01/34] atp870u: Remove workport Ondrej Zary
2015-05-03 17:31 ` [PATCH 02/34] atp870u: Remove tmport1 Ondrej Zary
2015-05-03 17:31 ` [PATCH 03/34] atp870u: Untangle tmport Ondrej Zary
2015-05-03 17:31 ` [PATCH 04/34] atp870u: Untangle tmport #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 05/34] atp870u: Untangle tmport #3 Ondrej Zary
2015-05-03 17:31 ` [PATCH 06/34] atp870u: Untangle tmport #4 Ondrej Zary
2015-05-03 17:31 ` [PATCH 07/34] atp870u: Untangle tmport #5 Ondrej Zary
2015-05-03 17:31 ` [PATCH 08/34] atp870u: Untangle tmport #6 Ondrej Zary
2015-05-03 17:31 ` [PATCH 09/34] atp870u: Untangle tmport #7 Ondrej Zary
2015-05-03 17:31 ` [PATCH 10/34] atp870u: Untangle tmport #8 Ondrej Zary
2015-05-03 17:31 ` [PATCH 11/34] atp870u: Untangle tmpcip Ondrej Zary
2015-05-03 17:31 ` [PATCH 12/34] atp870u: Untangle tmpcip #2 Ondrej Zary
2015-05-03 17:31 ` Ondrej Zary [this message]
2015-05-03 17:31 ` [PATCH 14/34] atp870u: Remove ugly gotos #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 15/34] atp870u: Remove ugly gotos #3 Ondrej Zary
2015-05-03 17:31 ` [PATCH 16/34] atp870u: Remove ugly gotos #4 Ondrej Zary
2015-05-03 17:31 ` [PATCH 17/34] atp870u: Remove ugly gotos #5 Ondrej Zary
2015-05-03 17:31 ` [PATCH 18/34] atp870u: Introduce HW access wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 19/34] atp870u: Convert is870() to use wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 20/34] atp870u: Convert is880() " Ondrej Zary
2015-05-03 17:31 ` [PATCH 21/34] atp870u: Convert is885() " Ondrej Zary
2015-05-03 17:31 ` [PATCH 22/34] atp870u: Unify code format in is870(), is880() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 23/34] atp870u: Add channel parameter to is870() and is880() Ondrej Zary
2015-05-03 17:31 ` [PATCH 24/34] atp870u: Move chip-specific lines out of is880() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 25/34] atp870u: Remove is880() Ondrej Zary
2015-05-03 17:31 ` [PATCH 26/34] atp870u: Add wide_chip parameter to is870() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 27/34] atp870u: Add remaining 870 support to is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 28/34] atp870u: Move 870-specific code out of is870() Ondrej Zary
2015-05-03 17:31 ` [PATCH 29/34] atp870u: Remove is870() Ondrej Zary
2015-05-03 17:31 ` [PATCH 30/34] atp870u: Rename is885() to atp_is() Ondrej Zary
2015-05-03 17:31 ` [PATCH 31/34] atp870u: Convert remaining in[bwl] and out[bwl] to wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 32/34] atp870u: Replace port 0x80 delay by udelay Ondrej Zary
2015-05-03 17:31 ` [PATCH 33/34] atp870u: Fix incorrect writeb_io access to register 0x3a Ondrej Zary
2015-05-03 17:31 ` [PATCH 34/34] atp870u: Introduce atp_set_host_id Ondrej Zary
2015-05-11 9:06 ` [RFC PATCH 00/34] atp870u: Remove the first level of crap Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430674310-11576-14-git-send-email-linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).