From: Ondrej Zary <linux@rainbow-software.org>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 17/34] atp870u: Remove ugly gotos #5
Date: Sun, 3 May 2015 19:31:33 +0200 [thread overview]
Message-ID: <1430674310-11576-18-git-send-email-linux@rainbow-software.org> (raw)
In-Reply-To: <1430674310-11576-1-git-send-email-linux@rainbow-software.org>
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/atp870u.c | 134 ++++++++++++++++++++++--------------------------
1 file changed, 62 insertions(+), 72 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 91644e9..1eeaaf8 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -1007,28 +1007,22 @@ static void tscam(struct Scsi_Host *host)
;
outb(1, 0x80);
udelay(100);
- for (n = 0; n < 0x30000; n++) {
- if ((inb(dev->ioport[0] + 0x1c) & 0x80) != 0) { /* bsy ? */
- goto wait_io;
- }
- }
- goto TCM_SYNC;
-wait_io:
- for (n = 0; n < 0x30000; n++) {
- if ((inb(dev->ioport[0] + 0x1c) & 0x81) == 0x0081) {
- goto wait_io1;
- }
- }
- goto TCM_SYNC;
-wait_io1:
- inb(0x80);
- val |= 0x8003; /* io,cd,db7 */
- outw(val, dev->ioport[0] + 0x1c);
- inb(0x80);
- val &= 0x00bf; /* no sel */
- outw(val, dev->ioport[0] + 0x1c);
- outb(2, 0x80);
-TCM_SYNC:
+ for (n = 0; n < 0x30000; n++)
+ if ((inb(dev->ioport[0] + 0x1c) & 0x80) != 0) /* bsy ? */
+ break;
+ if (n < 0x30000)
+ for (n = 0; n < 0x30000; n++)
+ if ((inb(dev->ioport[0] + 0x1c) & 0x81) == 0x0081) {
+ inb(0x80);
+ val |= 0x8003; /* io,cd,db7 */
+ outw(val, dev->ioport[0] + 0x1c);
+ inb(0x80);
+ val &= 0x00bf; /* no sel */
+ outw(val, dev->ioport[0] + 0x1c);
+ outb(2, 0x80);
+ break;
+ }
+ while (1) {
/*
* The funny division into multiple delays is to accomodate
* arches like ARM where udelay() multiplies its argument by
@@ -1059,31 +1053,28 @@ TCM_SYNC:
outb(4, 0x80);
i = 8;
j = 0;
-TCM_ID:
- if ((inw(dev->ioport[0] + 0x1c) & 0x2000) == 0) {
- goto TCM_ID;
- }
- outb(5, 0x80);
- val &= 0x00ff; /* get ID_STRING */
- val |= 0x2000;
- k = fun_scam(dev, &val);
- if ((k & 0x03) == 0) {
- goto TCM_5;
- }
- mbuf[j] <<= 0x01;
- mbuf[j] &= 0xfe;
- if ((k & 0x02) != 0) {
- mbuf[j] |= 0x01;
- }
- i--;
- if (i > 0) {
- goto TCM_ID;
+
+ while (1) {
+ if ((inw(dev->ioport[0] + 0x1c) & 0x2000) == 0)
+ continue;
+ outb(5, 0x80);
+ val &= 0x00ff; /* get ID_STRING */
+ val |= 0x2000;
+ k = fun_scam(dev, &val);
+ if ((k & 0x03) == 0)
+ break;
+ mbuf[j] <<= 0x01;
+ mbuf[j] &= 0xfe;
+ if ((k & 0x02) != 0)
+ mbuf[j] |= 0x01;
+ i--;
+ if (i > 0)
+ continue;
+ j++;
+ i = 8;
}
- j++;
- i = 8;
- goto TCM_ID;
-TCM_5: /* isolation complete.. */
+ /* isolation complete.. */
/* mbuf[32]=0;
printk(" \n%x %x %x %s\n ",assignid_map,mbuf[0],mbuf[1],&mbuf[2]); */
i = 15;
@@ -1091,33 +1082,33 @@ TCM_5: /* isolation complete.. */
if ((j & 0x20) != 0) { /* bit5=1:ID up to 7 */
i = 7;
}
- if ((j & 0x06) == 0) { /* IDvalid? */
- goto G2Q5;
- }
- k = mbuf[1];
-small_id:
- m = 1;
- m <<= k;
- if ((m & assignid_map) == 0) {
- goto G2Q_QUIN;
- }
- if (k > 0) {
- k--;
- goto small_id;
- }
-G2Q5: /* srch from max acceptable ID# */
- k = i; /* max acceptable ID# */
-G2Q_LP:
- m = 1;
- m <<= k;
- if ((m & assignid_map) == 0) {
- goto G2Q_QUIN;
+ if ((j & 0x06) != 0) { /* IDvalid? */
+ k = mbuf[1];
+ while (1) {
+ m = 1;
+ m <<= k;
+ if ((m & assignid_map) == 0)
+ break;
+ if (k > 0)
+ k--;
+ else
+ break;
+ }
}
- if (k > 0) {
- k--;
- goto G2Q_LP;
+ if ((m & assignid_map) != 0) { /* srch from max acceptable ID# */
+ k = i; /* max acceptable ID# */
+ while (1) {
+ m = 1;
+ m <<= k;
+ if ((m & assignid_map) == 0)
+ break;
+ if (k > 0)
+ k--;
+ else
+ break;
+ }
}
-G2Q_QUIN: /* k=binID#, */
+ /* k=binID#, */
assignid_map |= m;
if (k < 8) {
quintet[0] = 0x38; /* 1st dft ID<8 */
@@ -1136,8 +1127,7 @@ G2Q_QUIN: /* k=binID#, */
val |= m;
fun_scam(dev, &val);
- goto TCM_SYNC;
-
+ }
}
static void is870(struct atp_unit *dev, unsigned int wkport)
--
Ondrej Zary
next prev parent reply other threads:[~2015-05-03 17:51 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-03 17:31 [RFC PATCH 00/34] atp870u: Remove the first level of crap Ondrej Zary
2015-05-03 17:31 ` [PATCH 01/34] atp870u: Remove workport Ondrej Zary
2015-05-03 17:31 ` [PATCH 02/34] atp870u: Remove tmport1 Ondrej Zary
2015-05-03 17:31 ` [PATCH 03/34] atp870u: Untangle tmport Ondrej Zary
2015-05-03 17:31 ` [PATCH 04/34] atp870u: Untangle tmport #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 05/34] atp870u: Untangle tmport #3 Ondrej Zary
2015-05-03 17:31 ` [PATCH 06/34] atp870u: Untangle tmport #4 Ondrej Zary
2015-05-03 17:31 ` [PATCH 07/34] atp870u: Untangle tmport #5 Ondrej Zary
2015-05-03 17:31 ` [PATCH 08/34] atp870u: Untangle tmport #6 Ondrej Zary
2015-05-03 17:31 ` [PATCH 09/34] atp870u: Untangle tmport #7 Ondrej Zary
2015-05-03 17:31 ` [PATCH 10/34] atp870u: Untangle tmport #8 Ondrej Zary
2015-05-03 17:31 ` [PATCH 11/34] atp870u: Untangle tmpcip Ondrej Zary
2015-05-03 17:31 ` [PATCH 12/34] atp870u: Untangle tmpcip #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 13/34] atp870u: Remove ugly gotos Ondrej Zary
2015-05-03 17:31 ` [PATCH 14/34] atp870u: Remove ugly gotos #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 15/34] atp870u: Remove ugly gotos #3 Ondrej Zary
2015-05-03 17:31 ` [PATCH 16/34] atp870u: Remove ugly gotos #4 Ondrej Zary
2015-05-03 17:31 ` Ondrej Zary [this message]
2015-05-03 17:31 ` [PATCH 18/34] atp870u: Introduce HW access wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 19/34] atp870u: Convert is870() to use wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 20/34] atp870u: Convert is880() " Ondrej Zary
2015-05-03 17:31 ` [PATCH 21/34] atp870u: Convert is885() " Ondrej Zary
2015-05-03 17:31 ` [PATCH 22/34] atp870u: Unify code format in is870(), is880() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 23/34] atp870u: Add channel parameter to is870() and is880() Ondrej Zary
2015-05-03 17:31 ` [PATCH 24/34] atp870u: Move chip-specific lines out of is880() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 25/34] atp870u: Remove is880() Ondrej Zary
2015-05-03 17:31 ` [PATCH 26/34] atp870u: Add wide_chip parameter to is870() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 27/34] atp870u: Add remaining 870 support to is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 28/34] atp870u: Move 870-specific code out of is870() Ondrej Zary
2015-05-03 17:31 ` [PATCH 29/34] atp870u: Remove is870() Ondrej Zary
2015-05-03 17:31 ` [PATCH 30/34] atp870u: Rename is885() to atp_is() Ondrej Zary
2015-05-03 17:31 ` [PATCH 31/34] atp870u: Convert remaining in[bwl] and out[bwl] to wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 32/34] atp870u: Replace port 0x80 delay by udelay Ondrej Zary
2015-05-03 17:31 ` [PATCH 33/34] atp870u: Fix incorrect writeb_io access to register 0x3a Ondrej Zary
2015-05-03 17:31 ` [PATCH 34/34] atp870u: Introduce atp_set_host_id Ondrej Zary
2015-05-11 9:06 ` [RFC PATCH 00/34] atp870u: Remove the first level of crap Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430674310-11576-18-git-send-email-linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).