From: Ondrej Zary <linux@rainbow-software.org>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 20/34] atp870u: Convert is880() to use wrappers
Date: Sun, 3 May 2015 19:31:36 +0200 [thread overview]
Message-ID: <1430674310-11576-21-git-send-email-linux@rainbow-software.org> (raw)
In-Reply-To: <1430674310-11576-1-git-send-email-linux@rainbow-software.org>
Subtract 0x40 to use _io access wrappers.
Now it's obvious that is870() and is880() are very similar.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/atp870u.c | 352 ++++++++++++++++++++++++------------------------
1 file changed, 176 insertions(+), 176 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 40d2033..17719e8 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -1594,7 +1594,7 @@ set_syn_ok:
atp_writeb_io(dev, 0, 0x3a, atp_readb_io(dev, 0, 0x3a) & 0xef);
}
-static void is880(struct atp_unit *dev, unsigned int wkport)
+static void is880(struct atp_unit *dev)
{
unsigned char i, j, k, rmb, n, lvdmode;
unsigned short int m;
@@ -1608,7 +1608,7 @@ static void is880(struct atp_unit *dev, unsigned int wkport)
static unsigned char wide[6] = { 0x80, 1, 2, 3, 1, 0 };
static unsigned char u3[9] = { 0x80, 1, 6, 4, 0x09, 00, 0x0e, 0x01, 0x02 };
- lvdmode = inb(wkport + 0x3f) & 0x40;
+ lvdmode = atp_readb_base(dev, 0x3f) & 0x40;
for (i = 0; i < 16; i++) {
m = 1;
@@ -1620,100 +1620,100 @@ static void is880(struct atp_unit *dev, unsigned int wkport)
printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[0]);
continue;
}
- outb(0x01, wkport + 0x5b);
- outb(0x08, wkport + 0x41);
- outb(0x7f, wkport + 0x42);
- outb(satn[0], wkport + 0x43);
- outb(satn[1], wkport + 0x44);
- outb(satn[2], wkport + 0x45);
- outb(satn[3], wkport + 0x46);
- outb(satn[4], wkport + 0x47);
- outb(satn[5], wkport + 0x48);
- outb(0, wkport + 0x4f);
- outb(dev->id[0][i].devsp, wkport + 0x51);
- outb(0, wkport + 0x52);
- outb(satn[6], wkport + 0x53);
- outb(satn[7], wkport + 0x54);
+ atp_writeb_io(dev, 0, 0x1b, 0x01);
+ atp_writeb_io(dev, 0, 1, 0x08);
+ atp_writeb_io(dev, 0, 2, 0x7f);
+ atp_writeb_io(dev, 0, 3, satn[0]);
+ atp_writeb_io(dev, 0, 4, satn[1]);
+ atp_writeb_io(dev, 0, 5, satn[2]);
+ atp_writeb_io(dev, 0, 6, satn[3]);
+ atp_writeb_io(dev, 0, 7, satn[4]);
+ atp_writeb_io(dev, 0, 8, satn[5]);
+ atp_writeb_io(dev, 0, 0x0f, 0);
+ atp_writeb_io(dev, 0, 0x11, dev->id[0][i].devsp);
+ atp_writeb_io(dev, 0, 0x12, 0);
+ atp_writeb_io(dev, 0, 0x13, satn[6]);
+ atp_writeb_io(dev, 0, 0x14, satn[7]);
j = i;
if ((j & 0x08) != 0) {
j = (j & 0x07) | 0x40;
}
- outb(j, wkport + 0x55);
- outb(satn[8], wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x15, j);
+ atp_writeb_io(dev, 0, 0x18, satn[8]);
- while ((inb(wkport + 0x5f) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if (inb(wkport + 0x57) != 0x11 && inb(wkport + 0x57) != 0x8e)
+ if (atp_readb_io(dev, 0, 0x17) != 0x11 && atp_readb_io(dev, 0, 0x17) != 0x8e)
continue;
- while (inb(wkport + 0x57) != 0x8e)
+ while (atp_readb_io(dev, 0, 0x17) != 0x8e)
cpu_relax();
dev->active_id[0] |= m;
- outb(0x30, wkport + 0x50);
- outb(0x00, wkport + 0x54);
+ atp_writeb_io(dev, 0, 0x10, 0x30);
+ atp_writeb_io(dev, 0, 0x14, 0x00);
phase_cmd:
- outb(0x08, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x18, 0x08);
- while ((inb(wkport + 0x5f) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x57);
+ j = atp_readb_io(dev, 0, 0x17);
if (j != 0x16) {
- outb(0x41, wkport + 0x50);
+ atp_writeb_io(dev, 0, 0x10, 0x41);
goto phase_cmd;
}
sel_ok:
- outb(inqd[0], wkport + 0x43);
- outb(inqd[1], wkport + 0x44);
- outb(inqd[2], wkport + 0x45);
- outb(inqd[3], wkport + 0x46);
- outb(inqd[4], wkport + 0x47);
- outb(inqd[5], wkport + 0x48);
- outb(0, wkport + 0x4f);
- outb(dev->id[0][i].devsp, wkport + 0x51);
- outb(0, wkport + 0x52);
- outb(inqd[6], wkport + 0x53);
- outb(inqd[7], wkport + 0x54);
- outb(inqd[8], wkport + 0x58);
+ atp_writeb_io(dev, 0, 3, inqd[0]);
+ atp_writeb_io(dev, 0, 4, inqd[1]);
+ atp_writeb_io(dev, 0, 5, inqd[2]);
+ atp_writeb_io(dev, 0, 6, inqd[3]);
+ atp_writeb_io(dev, 0, 7, inqd[4]);
+ atp_writeb_io(dev, 0, 8, inqd[5]);
+ atp_writeb_io(dev, 0, 0x0f, 0);
+ atp_writeb_io(dev, 0, 0x11, dev->id[0][i].devsp);
+ atp_writeb_io(dev, 0, 0x12, 0);
+ atp_writeb_io(dev, 0, 0x13, inqd[6]);
+ atp_writeb_io(dev, 0, 0x14, inqd[7]);
+ atp_writeb_io(dev, 0, 0x18, inqd[8]);
- while ((inb(wkport + 0x5f) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if (inb(wkport + 0x57) != 0x11 && inb(wkport + 0x57) != 0x8e)
+ if (atp_readb_io(dev, 0, 0x17) != 0x11 && atp_readb_io(dev, 0, 0x17) != 0x8e)
continue;
- while (inb(wkport + 0x57) != 0x8e)
+ while (atp_readb_io(dev, 0, 0x17) != 0x8e)
cpu_relax();
- outb(0x00, wkport + 0x5b);
- outb(0x08, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x1b, 0x00);
+ atp_writeb_io(dev, 0, 0x18, 0x08);
j = 0;
rd_inq_data:
- k = inb(wkport + 0x5f);
+ k = atp_readb_io(dev, 0, 0x1f);
if ((k & 0x01) != 0) {
- mbuf[j++] = inb(wkport + 0x59);
+ mbuf[j++] = atp_readb_io(dev, 0, 0x19);
goto rd_inq_data;
}
if ((k & 0x80) == 0) {
goto rd_inq_data;
}
- j = inb(wkport + 0x57);
+ j = atp_readb_io(dev, 0, 0x17);
if (j == 0x16) {
goto inq_ok;
}
- outb(0x46, wkport + 0x50);
- outb(0, wkport + 0x52);
- outb(0, wkport + 0x53);
- outb(0, wkport + 0x54);
- outb(0x08, wkport + 0x58);
- while ((inb(wkport + 0x5f) & 0x80) == 0x00)
+ atp_writeb_io(dev, 0, 0x10, 0x46);
+ atp_writeb_io(dev, 0, 0x12, 0);
+ atp_writeb_io(dev, 0, 0x13, 0);
+ atp_writeb_io(dev, 0, 0x14, 0);
+ atp_writeb_io(dev, 0, 0x18, 0x08);
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if (inb(wkport + 0x57) != 0x16)
+ if (atp_readb_io(dev, 0, 0x17) != 0x16)
goto sel_ok;
inq_ok:
@@ -1736,43 +1736,43 @@ inq_ok:
goto chg_wide;
}
- outb(0x01, wkport + 0x5b);
- outb(satn[0], wkport + 0x43);
- outb(satn[1], wkport + 0x44);
- outb(satn[2], wkport + 0x45);
- outb(satn[3], wkport + 0x46);
- outb(satn[4], wkport + 0x47);
- outb(satn[5], wkport + 0x48);
- outb(0, wkport + 0x4f);
- outb(dev->id[0][i].devsp, wkport + 0x51);
- outb(0, wkport + 0x52);
- outb(satn[6], wkport + 0x53);
- outb(satn[7], wkport + 0x54);
- outb(satn[8], wkport + 0x58);
-
- while ((inb(wkport + 0x5f) & 0x80) == 0x00)
+ atp_writeb_io(dev, 0, 0x1b, 0x01);
+ atp_writeb_io(dev, 0, 3, satn[0]);
+ atp_writeb_io(dev, 0, 4, satn[1]);
+ atp_writeb_io(dev, 0, 5, satn[2]);
+ atp_writeb_io(dev, 0, 6, satn[3]);
+ atp_writeb_io(dev, 0, 7, satn[4]);
+ atp_writeb_io(dev, 0, 8, satn[5]);
+ atp_writeb_io(dev, 0, 0x0f, 0);
+ atp_writeb_io(dev, 0, 0x11, dev->id[0][i].devsp);
+ atp_writeb_io(dev, 0, 0x12, 0);
+ atp_writeb_io(dev, 0, 0x13, satn[6]);
+ atp_writeb_io(dev, 0, 0x14, satn[7]);
+ atp_writeb_io(dev, 0, 0x18, satn[8]);
+
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if (inb(wkport + 0x57) != 0x11 && inb(wkport + 0x57) != 0x8e)
+ if (atp_readb_io(dev, 0, 0x17) != 0x11 && atp_readb_io(dev, 0, 0x17) != 0x8e)
continue;
- while (inb(wkport + 0x57) != 0x8e)
+ while (atp_readb_io(dev, 0, 0x17) != 0x8e)
cpu_relax();
try_u3:
j = 0;
- outb(0x09, wkport + 0x54);
- outb(0x20, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x14, 0x09);
+ atp_writeb_io(dev, 0, 0x18, 0x20);
- while ((inb(wkport + 0x5f) & 0x80) == 0) {
- if ((inb(wkport + 0x5f) & 0x01) != 0)
- outb(u3[j++], wkport + 0x59);
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, 0, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, 0, 0x19, u3[j++]);
}
- while ((inb(wkport + 0x57) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x17) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x57) & 0x0f;
+ j = atp_readb_io(dev, 0, 0x17) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
@@ -1784,12 +1784,12 @@ try_u3:
}
continue;
u3p_out:
- outb(0x20, wkport + 0x58);
- while ((inb(wkport + 0x5f) & 0x80) == 0) {
- if ((inb(wkport + 0x5f) & 0x01) != 0)
- outb(0, wkport + 0x59);
+ atp_writeb_io(dev, 0, 0x18, 0x20);
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, 0, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, 0, 0x19, 0);
}
- j = inb(wkport + 0x57) & 0x0f;
+ j = atp_readb_io(dev, 0, 0x17) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
@@ -1801,19 +1801,19 @@ u3p_out:
}
continue;
u3p_in:
- outb(0x09, wkport + 0x54);
- outb(0x20, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x14, 0x09);
+ atp_writeb_io(dev, 0, 0x18, 0x20);
k = 0;
u3p_in1:
- j = inb(wkport + 0x5f);
+ j = atp_readb_io(dev, 0, 0x1f);
if ((j & 0x01) != 0) {
- mbuf[k++] = inb(wkport + 0x59);
+ mbuf[k++] = atp_readb_io(dev, 0, 0x19);
goto u3p_in1;
}
if ((j & 0x80) == 0x00) {
goto u3p_in1;
}
- j = inb(wkport + 0x57) & 0x0f;
+ j = atp_readb_io(dev, 0, 0x17) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
@@ -1825,14 +1825,14 @@ u3p_in1:
}
continue;
u3p_cmd:
- outb(0x30, wkport + 0x50);
- outb(0x00, wkport + 0x54);
- outb(0x08, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x10, 0x30);
+ atp_writeb_io(dev, 0, 0x14, 0x00);
+ atp_writeb_io(dev, 0, 0x18, 0x08);
- while ((inb(wkport + 0x5f) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x57);
+ j = atp_readb_io(dev, 0, 0x17);
if (j != 0x16) {
if (j == 0x4e) {
goto u3p_out;
@@ -1856,42 +1856,42 @@ u3p_cmd:
continue;
}
chg_wide:
- outb(0x01, wkport + 0x5b);
- outb(satn[0], wkport + 0x43);
- outb(satn[1], wkport + 0x44);
- outb(satn[2], wkport + 0x45);
- outb(satn[3], wkport + 0x46);
- outb(satn[4], wkport + 0x47);
- outb(satn[5], wkport + 0x48);
- outb(0, wkport + 0x4f);
- outb(dev->id[0][i].devsp, wkport + 0x51);
- outb(0, wkport + 0x52);
- outb(satn[6], wkport + 0x53);
- outb(satn[7], wkport + 0x54);
- outb(satn[8], wkport + 0x58);
-
- while ((inb(wkport + 0x5f) & 0x80) == 0x00)
+ atp_writeb_io(dev, 0, 0x1b, 0x01);
+ atp_writeb_io(dev, 0, 3, satn[0]);
+ atp_writeb_io(dev, 0, 4, satn[1]);
+ atp_writeb_io(dev, 0, 5, satn[2]);
+ atp_writeb_io(dev, 0, 6, satn[3]);
+ atp_writeb_io(dev, 0, 7, satn[4]);
+ atp_writeb_io(dev, 0, 8, satn[5]);
+ atp_writeb_io(dev, 0, 0x0f, 0);
+ atp_writeb_io(dev, 0, 0x11, dev->id[0][i].devsp);
+ atp_writeb_io(dev, 0, 0x12, 0);
+ atp_writeb_io(dev, 0, 0x13, satn[6]);
+ atp_writeb_io(dev, 0, 0x14, satn[7]);
+ atp_writeb_io(dev, 0, 0x18, satn[8]);
+
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if (inb(wkport + 0x57) != 0x11 && inb(wkport + 0x57) != 0x8e)
+ if (atp_readb_io(dev, 0, 0x17) != 0x11 && atp_readb_io(dev, 0, 0x17) != 0x8e)
continue;
- while (inb(wkport + 0x57) != 0x8e)
+ while (atp_readb_io(dev, 0, 0x17) != 0x8e)
cpu_relax();
try_wide:
j = 0;
- outb(0x05, wkport + 0x54);
- outb(0x20, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x14, 0x05);
+ atp_writeb_io(dev, 0, 0x18, 0x20);
- while ((inb(wkport + 0x5f) & 0x80) == 0) {
- if ((inb(wkport + 0x5f) & 0x01) != 0)
- outb(wide[j++], wkport + 0x59);
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, 0, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, 0, 0x19, wide[j++]);
}
- while ((inb(wkport + 0x57) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x17) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x57) & 0x0f;
+ j = atp_readb_io(dev, 0, 0x17) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
@@ -1903,12 +1903,12 @@ try_wide:
}
continue;
widep_out:
- outb(0x20, wkport + 0x58);
- while ((inb(wkport + 0x5f) & 0x80) == 0) {
- if ((inb(wkport + 0x5f) & 0x01) != 0)
- outb(0, wkport + 0x59);
+ atp_writeb_io(dev, 0, 0x18, 0x20);
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, 0, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, 0, 0x19, 0);
}
- j = inb(wkport + 0x57) & 0x0f;
+ j = atp_readb_io(dev, 0, 0x17) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
@@ -1920,19 +1920,19 @@ widep_out:
}
continue;
widep_in:
- outb(0xff, wkport + 0x54);
- outb(0x20, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x14, 0xff);
+ atp_writeb_io(dev, 0, 0x18, 0x20);
k = 0;
widep_in1:
- j = inb(wkport + 0x5f);
+ j = atp_readb_io(dev, 0, 0x1f);
if ((j & 0x01) != 0) {
- mbuf[k++] = inb(wkport + 0x59);
+ mbuf[k++] = atp_readb_io(dev, 0, 0x19);
goto widep_in1;
}
if ((j & 0x80) == 0x00) {
goto widep_in1;
}
- j = inb(wkport + 0x57) & 0x0f;
+ j = atp_readb_io(dev, 0, 0x17) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
@@ -1944,14 +1944,14 @@ widep_in1:
}
continue;
widep_cmd:
- outb(0x30, wkport + 0x50);
- outb(0x00, wkport + 0x54);
- outb(0x08, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x10, 0x30);
+ atp_writeb_io(dev, 0, 0x14, 0x00);
+ atp_writeb_io(dev, 0, 0x18, 0x08);
- while ((inb(wkport + 0x5f) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x57);
+ j = atp_readb_io(dev, 0, 0x17);
if (j != 0x16) {
if (j == 0x4e) {
goto widep_out;
@@ -1996,56 +1996,56 @@ set_sync:
if ((m & dev->wide_id[0]) != 0) {
j |= 0x01;
}
- outb(j, wkport + 0x5b);
- outb(satn[0], wkport + 0x43);
- outb(satn[1], wkport + 0x44);
- outb(satn[2], wkport + 0x45);
- outb(satn[3], wkport + 0x46);
- outb(satn[4], wkport + 0x47);
- outb(satn[5], wkport + 0x48);
- outb(0, wkport + 0x4f);
- outb(dev->id[0][i].devsp, wkport + 0x51);
- outb(0, wkport + 0x52);
- outb(satn[6], wkport + 0x53);
- outb(satn[7], wkport + 0x54);
- outb(satn[8], wkport + 0x58);
-
- while ((inb(wkport + 0x5f) & 0x80) == 0x00)
+ atp_writeb_io(dev, 0, 0x1b, j);
+ atp_writeb_io(dev, 0, 3, satn[0]);
+ atp_writeb_io(dev, 0, 4, satn[1]);
+ atp_writeb_io(dev, 0, 5, satn[2]);
+ atp_writeb_io(dev, 0, 6, satn[3]);
+ atp_writeb_io(dev, 0, 7, satn[4]);
+ atp_writeb_io(dev, 0, 8, satn[5]);
+ atp_writeb_io(dev, 0, 0x0f, 0);
+ atp_writeb_io(dev, 0, 0x11, dev->id[0][i].devsp);
+ atp_writeb_io(dev, 0, 0x12, 0);
+ atp_writeb_io(dev, 0, 0x13, satn[6]);
+ atp_writeb_io(dev, 0, 0x14, satn[7]);
+ atp_writeb_io(dev, 0, 0x18, satn[8]);
+
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if ((inb(wkport + 0x57) != 0x11) && (inb(wkport + 0x57) != 0x8e)) {
+ if (atp_readb_io(dev, 0, 0x17) != 0x11 && atp_readb_io(dev, 0, 0x17) != 0x8e) {
continue;
}
- while (inb(wkport + 0x57) != 0x8e)
+ while (atp_readb_io(dev, 0, 0x17) != 0x8e)
cpu_relax();
try_sync:
j = 0;
- outb(0x06, wkport + 0x54);
- outb(0x20, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x14, 0x06);
+ atp_writeb_io(dev, 0, 0x18, 0x20);
- while ((inb(wkport + 0x5f) & 0x80) == 0) {
- if ((inb(wkport + 0x5f) & 0x01) != 0) {
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, 0, 0x1f) & 0x01) != 0) {
if ((m & dev->wide_id[0]) != 0) {
if ((m & dev->ultra_map[0]) != 0) {
- outb(synuw[j++], wkport + 0x59);
+ atp_writeb_io(dev, 0, 0x19, synuw[j++]);
} else {
- outb(synw[j++], wkport + 0x59);
+ atp_writeb_io(dev, 0, 0x19, synw[j++]);
}
} else {
if ((m & dev->ultra_map[0]) != 0) {
- outb(synu[j++], wkport + 0x59);
+ atp_writeb_io(dev, 0, 0x19, synu[j++]);
} else {
- outb(synn[j++], wkport + 0x59);
+ atp_writeb_io(dev, 0, 0x19, synn[j++]);
}
}
}
}
- while ((inb(wkport + 0x57) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x17) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x57) & 0x0f;
+ j = atp_readb_io(dev, 0, 0x17) & 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
@@ -2057,12 +2057,12 @@ try_sync:
}
continue;
phase_outs:
- outb(0x20, wkport + 0x58);
- while ((inb(wkport + 0x5f) & 0x80) == 0x00) {
- if ((inb(wkport + 0x5f) & 0x01) != 0x00)
- outb(0x00, wkport + 0x59);
+ atp_writeb_io(dev, 0, 0x18, 0x20);
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00) {
+ if ((atp_readb_io(dev, 0, 0x1f) & 0x01) != 0x00)
+ atp_writeb_io(dev, 0, 0x19, 0x00);
}
- j = inb(wkport + 0x57);
+ j = atp_readb_io(dev, 0, 0x17);
if (j == 0x85) {
goto tar_dcons;
}
@@ -2078,23 +2078,23 @@ phase_outs:
}
continue;
phase_ins:
- outb(0x06, wkport + 0x54);
- outb(0x20, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x14, 0x06);
+ atp_writeb_io(dev, 0, 0x18, 0x20);
k = 0;
phase_ins1:
- j = inb(wkport + 0x5f);
+ j = atp_readb_io(dev, 0, 0x1f);
if ((j & 0x01) != 0x00) {
- mbuf[k++] = inb(wkport + 0x59);
+ mbuf[k++] = atp_readb_io(dev, 0, 0x19);
goto phase_ins1;
}
if ((j & 0x80) == 0x00) {
goto phase_ins1;
}
- while ((inb(wkport + 0x57) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x17) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x57);
+ j = atp_readb_io(dev, 0, 0x17);
if (j == 0x85) {
goto tar_dcons;
}
@@ -2110,15 +2110,15 @@ phase_ins1:
}
continue;
phase_cmds:
- outb(0x30, wkport + 0x50);
+ atp_writeb_io(dev, 0, 0x10, 0x30);
tar_dcons:
- outb(0x00, wkport + 0x54);
- outb(0x08, wkport + 0x58);
+ atp_writeb_io(dev, 0, 0x14, 0x00);
+ atp_writeb_io(dev, 0, 0x18, 0x08);
- while ((inb(wkport + 0x5f) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x57);
+ j = atp_readb_io(dev, 0, 0x17);
if (j != 0x16) {
continue;
}
@@ -2375,7 +2375,7 @@ flash_ok_880:
outb(0x20, base_io + 0x51);
tscam(shpnt);
- is880(p, base_io);
+ is880(p);
outb(0xb0, base_io + 0x38);
shpnt->max_id = 16;
shpnt->this_id = host_id;
--
Ondrej Zary
next prev parent reply other threads:[~2015-05-03 17:52 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-03 17:31 [RFC PATCH 00/34] atp870u: Remove the first level of crap Ondrej Zary
2015-05-03 17:31 ` [PATCH 01/34] atp870u: Remove workport Ondrej Zary
2015-05-03 17:31 ` [PATCH 02/34] atp870u: Remove tmport1 Ondrej Zary
2015-05-03 17:31 ` [PATCH 03/34] atp870u: Untangle tmport Ondrej Zary
2015-05-03 17:31 ` [PATCH 04/34] atp870u: Untangle tmport #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 05/34] atp870u: Untangle tmport #3 Ondrej Zary
2015-05-03 17:31 ` [PATCH 06/34] atp870u: Untangle tmport #4 Ondrej Zary
2015-05-03 17:31 ` [PATCH 07/34] atp870u: Untangle tmport #5 Ondrej Zary
2015-05-03 17:31 ` [PATCH 08/34] atp870u: Untangle tmport #6 Ondrej Zary
2015-05-03 17:31 ` [PATCH 09/34] atp870u: Untangle tmport #7 Ondrej Zary
2015-05-03 17:31 ` [PATCH 10/34] atp870u: Untangle tmport #8 Ondrej Zary
2015-05-03 17:31 ` [PATCH 11/34] atp870u: Untangle tmpcip Ondrej Zary
2015-05-03 17:31 ` [PATCH 12/34] atp870u: Untangle tmpcip #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 13/34] atp870u: Remove ugly gotos Ondrej Zary
2015-05-03 17:31 ` [PATCH 14/34] atp870u: Remove ugly gotos #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 15/34] atp870u: Remove ugly gotos #3 Ondrej Zary
2015-05-03 17:31 ` [PATCH 16/34] atp870u: Remove ugly gotos #4 Ondrej Zary
2015-05-03 17:31 ` [PATCH 17/34] atp870u: Remove ugly gotos #5 Ondrej Zary
2015-05-03 17:31 ` [PATCH 18/34] atp870u: Introduce HW access wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 19/34] atp870u: Convert is870() to use wrappers Ondrej Zary
2015-05-03 17:31 ` Ondrej Zary [this message]
2015-05-03 17:31 ` [PATCH 21/34] atp870u: Convert is885() " Ondrej Zary
2015-05-03 17:31 ` [PATCH 22/34] atp870u: Unify code format in is870(), is880() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 23/34] atp870u: Add channel parameter to is870() and is880() Ondrej Zary
2015-05-03 17:31 ` [PATCH 24/34] atp870u: Move chip-specific lines out of is880() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 25/34] atp870u: Remove is880() Ondrej Zary
2015-05-03 17:31 ` [PATCH 26/34] atp870u: Add wide_chip parameter to is870() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 27/34] atp870u: Add remaining 870 support to is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 28/34] atp870u: Move 870-specific code out of is870() Ondrej Zary
2015-05-03 17:31 ` [PATCH 29/34] atp870u: Remove is870() Ondrej Zary
2015-05-03 17:31 ` [PATCH 30/34] atp870u: Rename is885() to atp_is() Ondrej Zary
2015-05-03 17:31 ` [PATCH 31/34] atp870u: Convert remaining in[bwl] and out[bwl] to wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 32/34] atp870u: Replace port 0x80 delay by udelay Ondrej Zary
2015-05-03 17:31 ` [PATCH 33/34] atp870u: Fix incorrect writeb_io access to register 0x3a Ondrej Zary
2015-05-03 17:31 ` [PATCH 34/34] atp870u: Introduce atp_set_host_id Ondrej Zary
2015-05-11 9:06 ` [RFC PATCH 00/34] atp870u: Remove the first level of crap Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430674310-11576-21-git-send-email-linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).