From: Ondrej Zary <linux@rainbow-software.org>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 26/34] atp870u: Add wide_chip parameter to is870() and is885()
Date: Sun, 3 May 2015 19:31:42 +0200 [thread overview]
Message-ID: <1430674310-11576-27-git-send-email-linux@rainbow-software.org> (raw)
In-Reply-To: <1430674310-11576-1-git-send-email-linux@rainbow-software.org>
Don't check chip_ver in is870() but add wide_chip parameter for that.
Then add the non-wide support to is885().
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/atp870u.c | 46 +++++++++++++++++++++++++---------------------
1 file changed, 25 insertions(+), 21 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 4222c8d..5c98ffc 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -41,7 +41,7 @@
static struct scsi_host_template atp870u_template;
static void send_s870(struct atp_unit *dev,unsigned char c);
-static void is885(struct atp_unit *dev, unsigned char c, unsigned char lvdmode);
+static void is885(struct atp_unit *dev, unsigned char c, bool wide_chip, unsigned char lvdmode);
static void tscam_885(void);
static inline void atp_writeb_base(struct atp_unit *atp, u8 reg, u8 val)
@@ -1162,7 +1162,7 @@ static void tscam(struct Scsi_Host *host)
}
}
-static void is870(struct atp_unit *dev, unsigned char c)
+static void is870(struct atp_unit *dev, unsigned char c, bool wide_chip)
{
unsigned char i, j, k, rmb, n;
unsigned short int m;
@@ -1177,9 +1177,8 @@ static void is870(struct atp_unit *dev, unsigned char c)
atp_writeb_io(dev, c, 0x3a, atp_readb_io(dev, c, 0x3a) | 0x10);
for (i = 0; i < 16; i++) {
- if ((dev->chip_ver != 4) && (i > 7)) {
+ if (!wide_chip && (i > 7))
break;
- }
m = 1;
m = m << i;
if ((m & dev->active_id[c]) != 0) {
@@ -1189,11 +1188,7 @@ static void is870(struct atp_unit *dev, unsigned char c)
printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[c]);
continue;
}
- if (dev->chip_ver == 4) {
- atp_writeb_io(dev, c, 0x1b, 0x01);
- } else {
- atp_writeb_io(dev, c, 0x1b, 0x00);
- }
+ atp_writeb_io(dev, c, 0x1b, wide_chip ? 0x01 : 0x00);
atp_writeb_io(dev, c, 1, 0x08);
atp_writeb_io(dev, c, 2, 0x7f);
atp_writeb_io(dev, c, 3, satn[0]);
@@ -1262,7 +1257,7 @@ sel_ok:
while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
- if (dev->chip_ver == 4)
+ if (wide_chip)
atp_writeb_io(dev, c, 0x1b, 0x00);
atp_writeb_io(dev, c, 0x18, 0x08);
@@ -1298,9 +1293,8 @@ inq_ok:
dev->id[c][i].devtype = mbuf[0];
rmb = mbuf[1];
n = mbuf[7];
- if (dev->chip_ver != 4) {
+ if (!wide_chip)
goto not_wide;
- }
if ((mbuf[7] & 0x60) == 0) {
goto not_wide;
}
@@ -1807,7 +1801,7 @@ flash_ok_880:
outb(0x20, base_io + 0x51);
tscam(shpnt);
- is885(p, 0, atp_readb_base(p, 0x3f) & 0x40);
+ is885(p, 0, true, atp_readb_base(p, 0x3f) & 0x40);
outb(0xb0, base_io + 0x38);
shpnt->max_id = 16;
shpnt->this_id = host_id;
@@ -1953,10 +1947,10 @@ flash_ok_885:
tscam_885();
printk(KERN_INFO " Scanning Channel A SCSI Device ...\n");
- is885(p, 0, atp_readb_io(p, 0, 0x1b) >> 7);
+ is885(p, 0, true, atp_readb_io(p, 0, 0x1b) >> 7);
atp_writeb_io(p, 0, 0x16, 0x80);
printk(KERN_INFO " Scanning Channel B SCSI Device ...\n");
- is885(p, 1, atp_readb_io(p, 1, 0x1b) >> 7);
+ is885(p, 1, true, atp_readb_io(p, 1, 0x1b) >> 7);
atp_writeb_io(p, 1, 0x16, 0x80);
k = inb(base_io + 0x28) & 0xcf;
k |= 0xc0;
@@ -2038,7 +2032,7 @@ flash_ok_885:
outb(0x20, base_io + 0x11);
tscam(shpnt);
- is870(p, 0);
+ is870(p, 0, p->chip_ver == 4);
outb((inb(base_io + 0x3a) & 0xef), base_io + 0x3a);
outb((inb(base_io + 0x3b) | 0x20), base_io + 0x3b);
if (atpdev->chip_ver == 4)
@@ -2259,7 +2253,7 @@ static void tscam_885(void)
-static void is885(struct atp_unit *dev, unsigned char c, unsigned char lvdmode)
+static void is885(struct atp_unit *dev, unsigned char c, bool wide_chip, unsigned char lvdmode)
{
unsigned char i, j, k, rmb, n;
unsigned short int m;
@@ -2274,6 +2268,8 @@ static void is885(struct atp_unit *dev, unsigned char c, unsigned char lvdmode)
static unsigned char u3[9] = { 0x80, 1, 6, 4, 0x09, 00, 0x0e, 0x01, 0x02 };
for (i = 0; i < 16; i++) {
+ if (!wide_chip && (i > 7))
+ break;
m = 1;
m = m << i;
if ((m & dev->active_id[c]) != 0) {
@@ -2283,7 +2279,7 @@ static void is885(struct atp_unit *dev, unsigned char c, unsigned char lvdmode)
printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[c]);
continue;
}
- atp_writeb_io(dev, c, 0x1b, 0x01);
+ atp_writeb_io(dev, c, 0x1b, wide_chip ? 0x01 : 0x00);
atp_writeb_io(dev, c, 1, 0x08);
atp_writeb_io(dev, c, 2, 0x7f);
atp_writeb_io(dev, c, 3, satn[0]);
@@ -2352,7 +2348,9 @@ sel_ok:
while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
- atp_writeb_io(dev, c, 0x1b, 0x00);
+ if (wide_chip)
+ atp_writeb_io(dev, c, 0x1b, 0x00);
+
atp_writeb_io(dev, c, 0x18, 0x08);
j = 0;
rd_inq_data:
@@ -2386,11 +2384,17 @@ inq_ok:
dev->id[c][i].devtype = mbuf[0];
rmb = mbuf[1];
n = mbuf[7];
+ if (!wide_chip)
+ goto not_wide;
if ((mbuf[7] & 0x60) == 0) {
goto not_wide;
}
- if ((i < 8) && ((dev->global_map[c] & 0x20) == 0)) {
- goto not_wide;
+ if (dev->dev_id == ATP885_DEVID || dev->dev_id == ATP880_DEVID1 || dev->dev_id == ATP880_DEVID2) {
+ if ((i < 8) && ((dev->global_map[c] & 0x20) == 0))
+ goto not_wide;
+ } else { /* result of is870() merge - is this a bug? */
+ if ((dev->global_map[c] & 0x20) == 0)
+ goto not_wide;
}
if (lvdmode == 0) {
goto chg_wide;
--
Ondrej Zary
next prev parent reply other threads:[~2015-05-03 17:51 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-03 17:31 [RFC PATCH 00/34] atp870u: Remove the first level of crap Ondrej Zary
2015-05-03 17:31 ` [PATCH 01/34] atp870u: Remove workport Ondrej Zary
2015-05-03 17:31 ` [PATCH 02/34] atp870u: Remove tmport1 Ondrej Zary
2015-05-03 17:31 ` [PATCH 03/34] atp870u: Untangle tmport Ondrej Zary
2015-05-03 17:31 ` [PATCH 04/34] atp870u: Untangle tmport #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 05/34] atp870u: Untangle tmport #3 Ondrej Zary
2015-05-03 17:31 ` [PATCH 06/34] atp870u: Untangle tmport #4 Ondrej Zary
2015-05-03 17:31 ` [PATCH 07/34] atp870u: Untangle tmport #5 Ondrej Zary
2015-05-03 17:31 ` [PATCH 08/34] atp870u: Untangle tmport #6 Ondrej Zary
2015-05-03 17:31 ` [PATCH 09/34] atp870u: Untangle tmport #7 Ondrej Zary
2015-05-03 17:31 ` [PATCH 10/34] atp870u: Untangle tmport #8 Ondrej Zary
2015-05-03 17:31 ` [PATCH 11/34] atp870u: Untangle tmpcip Ondrej Zary
2015-05-03 17:31 ` [PATCH 12/34] atp870u: Untangle tmpcip #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 13/34] atp870u: Remove ugly gotos Ondrej Zary
2015-05-03 17:31 ` [PATCH 14/34] atp870u: Remove ugly gotos #2 Ondrej Zary
2015-05-03 17:31 ` [PATCH 15/34] atp870u: Remove ugly gotos #3 Ondrej Zary
2015-05-03 17:31 ` [PATCH 16/34] atp870u: Remove ugly gotos #4 Ondrej Zary
2015-05-03 17:31 ` [PATCH 17/34] atp870u: Remove ugly gotos #5 Ondrej Zary
2015-05-03 17:31 ` [PATCH 18/34] atp870u: Introduce HW access wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 19/34] atp870u: Convert is870() to use wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 20/34] atp870u: Convert is880() " Ondrej Zary
2015-05-03 17:31 ` [PATCH 21/34] atp870u: Convert is885() " Ondrej Zary
2015-05-03 17:31 ` [PATCH 22/34] atp870u: Unify code format in is870(), is880() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 23/34] atp870u: Add channel parameter to is870() and is880() Ondrej Zary
2015-05-03 17:31 ` [PATCH 24/34] atp870u: Move chip-specific lines out of is880() and is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 25/34] atp870u: Remove is880() Ondrej Zary
2015-05-03 17:31 ` Ondrej Zary [this message]
2015-05-03 17:31 ` [PATCH 27/34] atp870u: Add remaining 870 support to is885() Ondrej Zary
2015-05-03 17:31 ` [PATCH 28/34] atp870u: Move 870-specific code out of is870() Ondrej Zary
2015-05-03 17:31 ` [PATCH 29/34] atp870u: Remove is870() Ondrej Zary
2015-05-03 17:31 ` [PATCH 30/34] atp870u: Rename is885() to atp_is() Ondrej Zary
2015-05-03 17:31 ` [PATCH 31/34] atp870u: Convert remaining in[bwl] and out[bwl] to wrappers Ondrej Zary
2015-05-03 17:31 ` [PATCH 32/34] atp870u: Replace port 0x80 delay by udelay Ondrej Zary
2015-05-03 17:31 ` [PATCH 33/34] atp870u: Fix incorrect writeb_io access to register 0x3a Ondrej Zary
2015-05-03 17:31 ` [PATCH 34/34] atp870u: Introduce atp_set_host_id Ondrej Zary
2015-05-11 9:06 ` [RFC PATCH 00/34] atp870u: Remove the first level of crap Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430674310-11576-27-git-send-email-linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).