linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yaniv Gardi <ygardi@codeaurora.org>
To: James.Bottomley@HansenPartnership.com
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, santoshsy@gmail.com,
	linux-scsi-owner@vger.kernel.org, subhashj@codeaurora.org,
	ygardi@codeaurora.org, pebolle@tiscali.nl,
	gbroner@codeaurora.org, Kishon Vijay Abraham I <kishon@ti.com>
Subject: [PATCH v2 1/4] phy: qcom-ufs: fix build error when the component is built as a module
Date: Wed,  3 Jun 2015 12:37:32 +0300	[thread overview]
Message-ID: <1433324255-27510-2-git-send-email-ygardi@codeaurora.org> (raw)
In-Reply-To: <1433324255-27510-1-git-send-email-ygardi@codeaurora.org>

Export the following functions in order to avoid build errors
when the component PHY_QCOM_UFS is compiled as a module:

ERROR: "ufs_qcom_phy_disable_ref_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_enable_ref_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_is_pcs_ready" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_disable_iface_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_start_serdes" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_calibrate_phy" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_enable_dev_ref_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_set_tx_lane_enable" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_disable_dev_ref_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_save_controller_version" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_enable_iface_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined!
make[1]: *** [__modpost] Error 1

Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>

---
 drivers/phy/phy-qcom-ufs.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
index f9c618f..6140a8b 100644
--- a/drivers/phy/phy-qcom-ufs.c
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -432,6 +432,7 @@ out_disable_src:
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_ref_clk);
 
 static
 int ufs_qcom_phy_disable_vreg(struct phy *phy,
@@ -474,6 +475,7 @@ void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
 		phy->is_ref_clk_enabled = false;
 	}
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_ref_clk);
 
 #define UFS_REF_CLK_EN	(1 << 5)
 
@@ -517,11 +519,13 @@ void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy)
 {
 	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_dev_ref_clk);
 
 void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
 {
 	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk);
 
 /* Turn ON M-PHY RMMI interface clocks */
 int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
@@ -550,6 +554,7 @@ int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_iface_clk);
 
 /* Turn OFF M-PHY RMMI interface clocks */
 void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
@@ -562,6 +567,7 @@ void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
 		phy->is_iface_clk_enabled = false;
 	}
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_iface_clk);
 
 int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
 {
@@ -578,6 +584,7 @@ int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
 
 int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
 {
@@ -595,6 +602,7 @@ int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable);
 
 void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
 					  u8 major, u16 minor, u16 step)
@@ -605,6 +613,7 @@ void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
 	ufs_qcom_phy->host_ctrl_rev_minor = minor;
 	ufs_qcom_phy->host_ctrl_rev_step = step;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
 
 int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
 {
@@ -625,6 +634,7 @@ int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
 
 int ufs_qcom_phy_remove(struct phy *generic_phy,
 			struct ufs_qcom_phy *ufs_qcom_phy)
@@ -662,6 +672,7 @@ int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
 	return ufs_qcom_phy->phy_spec_ops->
 			is_physical_coding_sublayer_ready(ufs_qcom_phy);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
 
 int ufs_qcom_phy_power_on(struct phy *generic_phy)
 {
-- 
1.8.5.2

-- 
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  reply	other threads:[~2015-06-03  9:37 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-03  9:37 [PATCH v2 0/4] fixing building errors and warnings when components Yaniv Gardi
2015-06-03  9:37 ` Yaniv Gardi [this message]
2015-06-03  9:37 ` [PATCH v2 2/4] scsi: ufs-qcom: fix compilation warning if compiled as a module Yaniv Gardi
2015-06-03  9:37 ` [PATCH v2 3/4] scsi: ufs-qcom: update configuration option of SCSI_UFS_QCOM component Yaniv Gardi
2015-06-03  9:37 ` [PATCH v2 4/4] scsi: ufs: probe and init of variant driver from the platform device Yaniv Gardi
2015-06-04 14:07   ` Paul Bolle
2015-06-04 14:42     ` Paul Bolle
2015-06-04 20:42     ` ygardi
2015-06-07 15:22     ` ygardi-sgV2jX0FEOL9JmXXK+q4OQ
2015-06-04 14:32   ` Akinobu Mita
2015-06-04 20:53     ` ygardi
2015-06-05 16:47       ` Akinobu Mita
2015-06-07 15:32         ` ygardi
2015-06-08 14:47           ` Akinobu Mita
2015-06-08 15:02           ` Rob Herring
2015-06-09  5:53             ` Dov Levenglick
     [not found]               ` <bfade46f9d953e10240acb835105b81d.squirrel-mMfbam+mt9083fI46fginR2eb7JE58TQ@public.gmane.org>
2015-06-09 12:53                 ` Rob Herring
2015-06-17  7:42                   ` Dov Levenglick
2015-06-17 12:46                     ` Rob Herring
2015-06-17 13:17                       ` Dov Levenglick
2015-06-17 13:37                         ` Rob Herring
2015-06-17 14:21                           ` Dov Levenglick
2015-06-17 14:31                             ` James Bottomley
2015-06-17 14:38                               ` Dov Levenglick
     [not found]     ` <CAC5umyis6HU06KU-aSGoy6mCt-u+5Pz16nDk1qHrcsTnFo_2hA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-06-08 14:51       ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433324255-27510-2-git-send-email-ygardi@codeaurora.org \
    --to=ygardi@codeaurora.org \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=gbroner@codeaurora.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi-owner@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=pebolle@tiscali.nl \
    --cc=santoshsy@gmail.com \
    --cc=subhashj@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).