From: Hannes Reinecke <hare@suse.de>
To: James Bottomley <james.bottomley@hansenpartnership.com>
Cc: Christoph Hellwig <hch@lst.de>,
linux-scsi@vger.kernel.org,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Bart van Assche <bart.vanassche@sandisk.com>,
Hannes Reinecke <hare@suse.de>
Subject: [PATCH 17/20] scsi_dh_alua: Recheck state on unit attention
Date: Wed, 8 Jul 2015 11:06:15 +0200 [thread overview]
Message-ID: <1436346378-96518-18-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1436346378-96518-1-git-send-email-hare@suse.de>
When we receive a unit attention code of 'ALUA state changed'
we should recheck the state, as it might be due to an implicit
ALUA state transition.
At the same time a workqueue item might already be queued, which
should be started immediately to avoid any delays.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/device_handler/scsi_dh_alua.c | 48 +++++++++++++++---------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index ea47d15..aa58659 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -120,7 +120,7 @@ static char print_alua_state(int);
static void alua_rtpg_work(struct work_struct *work);
static void alua_stpg_work(struct work_struct *work);
static void alua_qdata_work(struct work_struct *work);
-static void alua_check(struct scsi_device *sdev);
+static void alua_check(struct scsi_device *sdev, bool force);
static void release_port_group(struct kref *kref)
{
@@ -505,7 +505,7 @@ static char print_alua_state(int state)
}
static int alua_check_sense(struct scsi_device *sdev,
- struct scsi_sense_hdr *sense_hdr)
+ struct scsi_sense_hdr *sense_hdr)
{
switch (sense_hdr->sense_key) {
case NOT_READY:
@@ -514,36 +514,34 @@ static int alua_check_sense(struct scsi_device *sdev,
* LUN Not Accessible - ALUA state transition
* Kickoff worker to update internal state.
*/
- alua_check(sdev);
- return ADD_TO_MLQUEUE;
+ alua_check(sdev, false);
+ return NEEDS_RETRY;
}
break;
case UNIT_ATTENTION:
- if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
- /*
- * Power On, Reset, or Bus Device Reset, just retry.
- */
- return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x04)
- /*
- * Device internal reset
- */
- return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x01)
+ if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) {
/*
- * Mode Parameter Changed
+ * Power On, Reset, or Bus Device Reset.
+ * Might have obscured a state transition,
+ * so schedule a recheck.
*/
+ alua_check(sdev, true);
return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06)
+ }
+ if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
/*
* ALUA state changed
*/
+ alua_check(sdev, true);
return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07)
+ }
+ if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
/*
* Implicit ALUA state transition failed
*/
+ alua_check(sdev, true);
return ADD_TO_MLQUEUE;
+ }
break;
}
@@ -899,7 +897,7 @@ static void alua_qdata_work(struct work_struct *work)
static void alua_rtpg_queue(struct alua_port_group *pg,
struct scsi_device *sdev,
- struct alua_queue_data *qdata)
+ struct alua_queue_data *qdata, bool force)
{
int start_queue = 0;
unsigned long flags;
@@ -920,7 +918,9 @@ static void alua_rtpg_queue(struct alua_port_group *pg,
pg->rtpg_sdev = sdev;
scsi_device_get(sdev);
start_queue = 1;
- }
+ } else if (!(pg->flags & ALUA_PG_RUN_RTPG) && force)
+ start_queue = 1;
+
spin_unlock_irqrestore(&pg->rtpg_lock, flags);
if (start_queue)
@@ -959,7 +959,7 @@ static int alua_initialize(struct scsi_device *sdev, struct alua_dh_data *h)
complete(&h->init_complete);
if (pg) {
pg->expiry = 0;
- alua_rtpg_queue(pg, sdev, NULL);
+ alua_rtpg_queue(pg, sdev, NULL, true);
kref_put(&pg->kref, release_port_group);
}
return h->error;
@@ -1072,7 +1072,7 @@ static int alua_activate(struct scsi_device *sdev,
pg->flags |= ALUA_OPTIMIZE_STPG;
spin_unlock_irqrestore(&pg->rtpg_lock, flags);
}
- alua_rtpg_queue(pg, sdev, qdata);
+ alua_rtpg_queue(pg, sdev, qdata, true);
kref_put(&pg->kref, release_port_group);
out:
if (fn)
@@ -1086,7 +1086,7 @@ out:
*
* Check the device status
*/
-static void alua_check(struct scsi_device *sdev)
+static void alua_check(struct scsi_device *sdev, bool force)
{
struct alua_dh_data *h = sdev->handler_data;
struct alua_port_group *pg;
@@ -1096,7 +1096,7 @@ static void alua_check(struct scsi_device *sdev)
if (pg) {
kref_get(&pg->kref);
rcu_read_unlock();
- alua_rtpg_queue(pg, sdev, NULL);
+ alua_rtpg_queue(pg, sdev, NULL, force);
kref_put(&pg->kref, release_port_group);
} else
rcu_read_unlock();
--
1.8.5.2
next prev parent reply other threads:[~2015-07-08 9:06 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-08 9:05 [PATCHv2 00/20] asynchronous ALUA device handler Hannes Reinecke
2015-07-08 9:05 ` [PATCH 01/20] scsi_dh_alua: Disable ALUA handling for non-disk devices Hannes Reinecke
2015-07-08 9:06 ` [PATCH 02/20] scsi_dh_alua: Use vpd_pg83 information Hannes Reinecke
2015-07-08 9:06 ` [PATCH 03/20] scsi_dh_alua: improved logging Hannes Reinecke
2015-07-08 9:06 ` [PATCH 04/20] scsi_dh_alua: Improve error handling Hannes Reinecke
2015-07-24 14:48 ` Christoph Hellwig
2015-07-25 15:42 ` Hannes Reinecke
2015-07-08 9:06 ` [PATCH 05/20] scsi: remove scsi_show_sense_hdr() Hannes Reinecke
2015-07-08 9:06 ` [PATCH 06/20] scsi_dh_alua: use flag for RTPG extended header Hannes Reinecke
2015-07-08 9:06 ` [PATCH 07/20] scsi_dh_alua: Pass buffer as function argument Hannes Reinecke
2015-07-24 14:48 ` Christoph Hellwig
2015-07-08 9:06 ` [PATCH 08/20] scsi_dh_alua: Make stpg synchronous Hannes Reinecke
2015-07-24 14:51 ` Christoph Hellwig
2015-07-25 15:44 ` Hannes Reinecke
2015-07-08 9:06 ` [PATCH 09/20] scsi_dh_alua: switch to scsi_execute() Hannes Reinecke
2015-07-24 14:53 ` Christoph Hellwig
2015-07-25 15:44 ` Hannes Reinecke
2015-07-08 9:06 ` [PATCH 10/20] scsi_dh_alua: put sense buffer on stack Hannes Reinecke
2015-07-08 9:06 ` [PATCH 11/20] scsi_dh_alua: Use separate alua_port_group structure Hannes Reinecke
2015-07-24 14:58 ` Christoph Hellwig
2015-07-25 15:52 ` Hannes Reinecke
2015-07-08 9:06 ` [PATCH 12/20] scsi_dh_alua: allocate RTPG buffer separately Hannes Reinecke
2015-07-24 14:59 ` Christoph Hellwig
2015-07-08 9:06 ` [PATCH 13/20] scsi_dh_alua: simplify sense code handling Hannes Reinecke
2015-07-24 15:00 ` Christoph Hellwig
2015-07-08 9:06 ` [PATCH 14/20] scsi_dh_alua: parse target device id Hannes Reinecke
2015-07-24 15:07 ` Christoph Hellwig
2015-07-24 15:28 ` Martin K. Petersen
2015-07-25 16:00 ` Hannes Reinecke
2015-07-25 15:53 ` Hannes Reinecke
2015-07-08 9:06 ` [PATCH 15/20] revert "scsi_dh_alua: ALUA hander attach should succeed while TPG is transitioning" Hannes Reinecke
2015-07-08 9:06 ` [PATCH 16/20] scsi_dh_alua: Use workqueue for RTPG Hannes Reinecke
2015-07-24 15:21 ` Christoph Hellwig
2015-07-25 15:58 ` Hannes Reinecke
2015-07-08 9:06 ` Hannes Reinecke [this message]
2015-07-08 9:06 ` [PATCH 18/20] scsi_dh_alua: update all port states Hannes Reinecke
2015-07-08 9:06 ` [PATCH 19/20] scsi_dh_alua: Send TEST UNIT READY to poll for transitioning Hannes Reinecke
2015-07-08 9:06 ` [PATCH 20/20] scsi_dh_alua: Update version to 2.0 Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436346378-96518-18-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=bart.vanassche@sandisk.com \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).