From: Ondrej Zary <linux@rainbow-software.org>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 21/52] atp870u: Convert is885() to use wrappers
Date: Sun, 26 Jul 2015 22:24:28 +0200 [thread overview]
Message-ID: <1437942299-26674-22-git-send-email-linux@rainbow-software.org> (raw)
In-Reply-To: <1437942299-26674-1-git-send-email-linux@rainbow-software.org>
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/atp870u.c | 358 ++++++++++++++++++++++++------------------------
1 file changed, 179 insertions(+), 179 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 1b9276f..ad7af54 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -41,7 +41,7 @@
static struct scsi_host_template atp870u_template;
static void send_s870(struct atp_unit *dev,unsigned char c);
-static void is885(struct atp_unit *dev, unsigned int wkport,unsigned char c);
+static void is885(struct atp_unit *dev, unsigned char c);
static void tscam_885(void);
static inline void atp_writeb_base(struct atp_unit *atp, u8 reg, u8 val)
@@ -2521,9 +2521,9 @@ flash_ok_885:
tscam_885();
printk(KERN_INFO " Scanning Channel A SCSI Device ...\n");
- is885(p, base_io + 0x80, 0);
+ is885(p, 0);
printk(KERN_INFO " Scanning Channel B SCSI Device ...\n");
- is885(p, base_io + 0xc0, 1);
+ is885(p, 1);
k = inb(base_io + 0x28) & 0xcf;
k |= 0xc0;
@@ -2825,7 +2825,7 @@ static void tscam_885(void)
-static void is885(struct atp_unit *dev, unsigned int wkport,unsigned char c)
+static void is885(struct atp_unit *dev, unsigned char c)
{
unsigned char i, j, k, rmb, n, lvdmode;
unsigned short int m;
@@ -2839,7 +2839,7 @@ static void is885(struct atp_unit *dev, unsigned int wkport,unsigned char c)
static unsigned char wide[6] = {0x80, 1, 2, 3, 1, 0};
static unsigned char u3[9] = { 0x80,1,6,4,0x09,00,0x0e,0x01,0x02 };
- lvdmode=inb(wkport + 0x1b) >> 7;
+ lvdmode=atp_readb_io(dev, c, 0x1b) >> 7;
for (i = 0; i < 16; i++) {
m = 1;
@@ -2851,93 +2851,93 @@ static void is885(struct atp_unit *dev, unsigned int wkport,unsigned char c)
printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[c]);
continue;
}
- outb(0x01, wkport + 0x1b);
- outb(0x08, wkport + 0x01);
- outb(0x7f, wkport + 0x02);
- outb(satn[0], wkport + 0x03);
- outb(satn[1], wkport + 0x04);
- outb(satn[2], wkport + 0x05);
- outb(satn[3], wkport + 0x06);
- outb(satn[4], wkport + 0x07);
- outb(satn[5], wkport + 0x08);
- outb(0, wkport + 0x0f);
- outb(dev->id[c][i].devsp, wkport + 0x11);
+ atp_writeb_io(dev, c, 0x1b, 0x01);
+ atp_writeb_io(dev, c, 1, 0x08);
+ atp_writeb_io(dev, c, 2, 0x7f);
+ atp_writeb_io(dev, c, 3, satn[0]);
+ atp_writeb_io(dev, c, 4, satn[1]);
+ atp_writeb_io(dev, c, 5, satn[2]);
+ atp_writeb_io(dev, c, 6, satn[3]);
+ atp_writeb_io(dev, c, 7, satn[4]);
+ atp_writeb_io(dev, c, 8, satn[5]);
+ atp_writeb_io(dev, c, 0x0f, 0);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][i].devsp);
- outb(0, wkport + 0x12);
- outb(satn[6], wkport + 0x13);
- outb(satn[7], wkport + 0x14);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, satn[6]);
+ atp_writeb_io(dev, c, 0x14, satn[7]);
j = i;
if ((j & 0x08) != 0) {
j = (j & 0x07) | 0x40;
}
- outb(j, wkport + 0x15);
- outb(satn[8], wkport + 0x18);
+ atp_writeb_io(dev, c, 0x15, j);
+ atp_writeb_io(dev, c, 0x18, satn[8]);
- while ((inb(wkport + 0x1f) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if ((inb(wkport + 0x17) != 0x11) && (inb(wkport + 0x17) != 0x8e)) {
+ if ((atp_readb_io(dev, c, 0x17) != 0x11) && (atp_readb_io(dev, c, 0x17) != 0x8e)) {
continue;
}
- while (inb(wkport + 0x17) != 0x8e)
+ while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
dev->active_id[c] |= m;
- outb(0x30, wkport + 0x10);
- outb(0x00, wkport + 0x14);
+ atp_writeb_io(dev, c, 0x10, 0x30);
+ atp_writeb_io(dev, c, 0x14, 0x00);
phase_cmd:
- outb(0x08, wkport + 0x18);
- while ((inb(wkport + 0x1f) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x17);
+ j = atp_readb_io(dev, c, 0x17);
if (j != 0x16) {
- outb(0x41, wkport + 0x10);
+ atp_writeb_io(dev, c, 0x10, 0x41);
goto phase_cmd;
}
sel_ok:
- outb(inqd[0], wkport + 0x03);
- outb(inqd[1], wkport + 0x04);
- outb(inqd[2], wkport + 0x05);
- outb(inqd[3], wkport + 0x06);
- outb(inqd[4], wkport + 0x07);
- outb(inqd[5], wkport + 0x08);
- outb(0, wkport + 0x0f);
- outb(dev->id[c][i].devsp, wkport + 0x11);
- outb(0, wkport + 0x12);
- outb(inqd[6], wkport + 0x13);
- outb(inqd[7], wkport + 0x14);
- outb(inqd[8], wkport + 0x18);
- while ((inb(wkport + 0x1f) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 3, inqd[0]);
+ atp_writeb_io(dev, c, 4, inqd[1]);
+ atp_writeb_io(dev, c, 5, inqd[2]);
+ atp_writeb_io(dev, c, 6, inqd[3]);
+ atp_writeb_io(dev, c, 7, inqd[4]);
+ atp_writeb_io(dev, c, 8, inqd[5]);
+ atp_writeb_io(dev, c, 0x0f, 0);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][i].devsp);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, inqd[6]);
+ atp_writeb_io(dev, c, 0x14, inqd[7]);
+ atp_writeb_io(dev, c, 0x18, inqd[8]);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if ((inb(wkport + 0x17) != 0x11) && (inb(wkport + 0x17) != 0x8e)) {
+ if ((atp_readb_io(dev, c, 0x17) != 0x11) && (atp_readb_io(dev, c, 0x17) != 0x8e)) {
continue;
}
- while (inb(wkport + 0x17) != 0x8e)
+ while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
- outb(0x00, wkport + 0x1b);
- outb(0x08, wkport + 0x18);
+ atp_writeb_io(dev, c, 0x1b, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
j = 0;
rd_inq_data:
- k = inb(wkport + 0x1f);
+ k = atp_readb_io(dev, c, 0x1f);
if ((k & 0x01) != 0) {
- mbuf[j++] = inb(wkport + 0x19);
+ mbuf[j++] = atp_readb_io(dev, c, 0x19);
goto rd_inq_data;
}
if ((k & 0x80) == 0) {
goto rd_inq_data;
}
- j = inb(wkport + 0x17);
+ j = atp_readb_io(dev, c, 0x17);
if (j == 0x16) {
goto inq_ok;
}
- outb(0x46, wkport + 0x10);
- outb(0, wkport + 0x12);
- outb(0, wkport + 0x13);
- outb(0, wkport + 0x14);
- outb(0x08, wkport + 0x18);
- while ((inb(wkport + 0x1f) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x10, 0x46);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, 0);
+ atp_writeb_io(dev, c, 0x14, 0);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if (inb(wkport + 0x17) != 0x16) {
+ if (atp_readb_io(dev, c, 0x17) != 0x16) {
goto sel_ok;
}
inq_ok:
@@ -2959,40 +2959,40 @@ inq_ok:
goto chg_wide;
}
- outb(0x01, wkport + 0x1b);
- outb(satn[0], wkport + 0x03);
- outb(satn[1], wkport + 0x04);
- outb(satn[2], wkport + 0x05);
- outb(satn[3], wkport + 0x06);
- outb(satn[4], wkport + 0x07);
- outb(satn[5], wkport + 0x08);
- outb(0, wkport + 0x0f);
- outb(dev->id[c][i].devsp, wkport + 0x11);
- outb(0, wkport + 0x12);
- outb(satn[6], wkport + 0x13);
- outb(satn[7], wkport + 0x14);
- outb(satn[8], wkport + 0x18);
-
- while ((inb(wkport + 0x1f) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x1b, 0x01);
+ atp_writeb_io(dev, c, 3, satn[0]);
+ atp_writeb_io(dev, c, 4, satn[1]);
+ atp_writeb_io(dev, c, 5, satn[2]);
+ atp_writeb_io(dev, c, 6, satn[3]);
+ atp_writeb_io(dev, c, 7, satn[4]);
+ atp_writeb_io(dev, c, 8, satn[5]);
+ atp_writeb_io(dev, c, 0x0f, 0);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][i].devsp);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, satn[6]);
+ atp_writeb_io(dev, c, 0x14, satn[7]);
+ atp_writeb_io(dev, c, 0x18, satn[8]);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if ((inb(wkport + 0x17) != 0x11) && (inb(wkport + 0x17) != 0x8e)) {
+ if ((atp_readb_io(dev, c, 0x17) != 0x11) && (atp_readb_io(dev, c, 0x17) != 0x8e)) {
continue;
}
- while (inb(wkport + 0x17) != 0x8e)
+ while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
try_u3:
j = 0;
- outb(0x09, wkport + 0x14);
- outb(0x20, wkport + 0x18);
+ atp_writeb_io(dev, c, 0x14, 0x09);
+ atp_writeb_io(dev, c, 0x18, 0x20);
- while ((inb(wkport + 0x1f) & 0x80) == 0) {
- if ((inb(wkport + 0x1f) & 0x01) != 0)
- outb(u3[j++], wkport + 0x19);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, c, 0x19, u3[j++]);
cpu_relax();
}
- while ((inb(wkport + 0x17) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, c, 0x17) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x17) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
@@ -3004,13 +3004,13 @@ try_u3:
}
continue;
u3p_out:
- outb(0x20, wkport + 0x18);
- while ((inb(wkport + 0x1f) & 0x80) == 0) {
- if ((inb(wkport + 0x1f) & 0x01) != 0)
- outb(0, wkport + 0x19);
+ atp_writeb_io(dev, c, 0x18, 0x20);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, c, 0x19, 0);
cpu_relax();
}
- j = inb(wkport + 0x17) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
@@ -3022,19 +3022,19 @@ u3p_out:
}
continue;
u3p_in:
- outb(0x09, wkport + 0x14);
- outb(0x20, wkport + 0x18);
+ atp_writeb_io(dev, c, 0x14, 0x09);
+ atp_writeb_io(dev, c, 0x18, 0x20);
k = 0;
u3p_in1:
- j = inb(wkport + 0x1f);
+ j = atp_readb_io(dev, c, 0x1f);
if ((j & 0x01) != 0) {
- mbuf[k++] = inb(wkport + 0x19);
+ mbuf[k++] = atp_readb_io(dev, c, 0x19);
goto u3p_in1;
}
if ((j & 0x80) == 0x00) {
goto u3p_in1;
}
- j = inb(wkport + 0x17) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
@@ -3046,11 +3046,11 @@ u3p_in1:
}
continue;
u3p_cmd:
- outb(0x30, wkport + 0x10);
- outb(0x00, wkport + 0x14);
- outb(0x08, wkport + 0x18);
- while ((inb(wkport + 0x1f) & 0x80) == 0x00);
- j = inb(wkport + 0x17);
+ atp_writeb_io(dev, c, 0x10, 0x30);
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00);
+ j = atp_readb_io(dev, c, 0x17);
if (j != 0x16) {
if (j == 0x4e) {
goto u3p_out;
@@ -3077,40 +3077,40 @@ u3p_cmd:
continue;
}
chg_wide:
- outb(0x01, wkport + 0x1b);
- outb(satn[0], wkport + 0x03);
- outb(satn[1], wkport + 0x04);
- outb(satn[2], wkport + 0x05);
- outb(satn[3], wkport + 0x06);
- outb(satn[4], wkport + 0x07);
- outb(satn[5], wkport + 0x08);
- outb(0, wkport + 0x0f);
- outb(dev->id[c][i].devsp, wkport + 0x11);
- outb(0, wkport + 0x12);
- outb(satn[6], wkport + 0x13);
- outb(satn[7], wkport + 0x14);
- outb(satn[8], wkport + 0x18);
-
- while ((inb(wkport + 0x1f) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x1b, 0x01);
+ atp_writeb_io(dev, c, 3, satn[0]);
+ atp_writeb_io(dev, c, 4, satn[1]);
+ atp_writeb_io(dev, c, 5, satn[2]);
+ atp_writeb_io(dev, c, 6, satn[3]);
+ atp_writeb_io(dev, c, 7, satn[4]);
+ atp_writeb_io(dev, c, 8, satn[5]);
+ atp_writeb_io(dev, c, 0x0f, 0);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][i].devsp);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, satn[6]);
+ atp_writeb_io(dev, c, 0x14, satn[7]);
+ atp_writeb_io(dev, c, 0x18, satn[8]);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if ((inb(wkport + 0x17) != 0x11) && (inb(wkport + 0x17) != 0x8e)) {
+ if ((atp_readb_io(dev, c, 0x17) != 0x11) && (atp_readb_io(dev, c, 0x17) != 0x8e)) {
continue;
}
- while (inb(wkport + 0x17) != 0x8e)
+ while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
try_wide:
j = 0;
- outb(0x05, wkport + 0x14);
- outb(0x20, wkport + 0x18);
+ atp_writeb_io(dev, c, 0x14, 0x05);
+ atp_writeb_io(dev, c, 0x18, 0x20);
- while ((inb(wkport + 0x1f) & 0x80) == 0) {
- if ((inb(wkport + 0x1f) & 0x01) != 0)
- outb(wide[j++], wkport + 0x19);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, c, 0x19, wide[j++]);
cpu_relax();
}
- while ((inb(wkport + 0x17) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, c, 0x17) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x17) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
@@ -3122,13 +3122,13 @@ try_wide:
}
continue;
widep_out:
- outb(0x20, wkport + 0x18);
- while ((inb(wkport + 0x1f) & 0x80) == 0) {
- if ((inb(wkport + 0x1f) & 0x01) != 0)
- outb(0, wkport + 0x19);
+ atp_writeb_io(dev, c, 0x18, 0x20);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, c, 0x19, 0);
cpu_relax();
}
- j = inb(wkport + 0x17) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
@@ -3140,19 +3140,19 @@ widep_out:
}
continue;
widep_in:
- outb(0xff, wkport + 0x14);
- outb(0x20, wkport + 0x18);
+ atp_writeb_io(dev, c, 0x14, 0xff);
+ atp_writeb_io(dev, c, 0x18, 0x20);
k = 0;
widep_in1:
- j = inb(wkport + 0x1f);
+ j = atp_readb_io(dev, c, 0x1f);
if ((j & 0x01) != 0) {
- mbuf[k++] = inb(wkport + 0x19);
+ mbuf[k++] = atp_readb_io(dev, c, 0x19);
goto widep_in1;
}
if ((j & 0x80) == 0x00) {
goto widep_in1;
}
- j = inb(wkport + 0x17) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
@@ -3164,12 +3164,12 @@ widep_in1:
}
continue;
widep_cmd:
- outb(0x30, wkport + 0x10);
- outb(0x00, wkport + 0x14);
- outb(0x08, wkport + 0x18);
- while ((inb(wkport + 0x1f) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x10, 0x30);
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x17);
+ j = atp_readb_io(dev, c, 0x17);
if (j != 0x16) {
if (j == 0x4e) {
goto widep_out;
@@ -3215,52 +3215,52 @@ set_sync:
if ((m & dev->wide_id[c]) != 0) {
j |= 0x01;
}
- outb(j, wkport + 0x1b);
- outb(satn[0], wkport + 0x03);
- outb(satn[1], wkport + 0x04);
- outb(satn[2], wkport + 0x05);
- outb(satn[3], wkport + 0x06);
- outb(satn[4], wkport + 0x07);
- outb(satn[5], wkport + 0x08);
- outb(0, wkport + 0x0f);
- outb(dev->id[c][i].devsp, wkport + 0x11);
- outb(0, wkport + 0x12);
- outb(satn[6], wkport + 0x13);
- outb(satn[7], wkport + 0x14);
- outb(satn[8], wkport + 0x18);
-
- while ((inb(wkport + 0x1f) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x1b, j);
+ atp_writeb_io(dev, c, 3, satn[0]);
+ atp_writeb_io(dev, c, 4, satn[1]);
+ atp_writeb_io(dev, c, 5, satn[2]);
+ atp_writeb_io(dev, c, 6, satn[3]);
+ atp_writeb_io(dev, c, 7, satn[4]);
+ atp_writeb_io(dev, c, 8, satn[5]);
+ atp_writeb_io(dev, c, 0x0f, 0);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][i].devsp);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, satn[6]);
+ atp_writeb_io(dev, c, 0x14, satn[7]);
+ atp_writeb_io(dev, c, 0x18, satn[8]);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- if ((inb(wkport + 0x17) != 0x11) && (inb(wkport + 0x17) != 0x8e)) {
+ if ((atp_readb_io(dev, c, 0x17) != 0x11) && (atp_readb_io(dev, c, 0x17) != 0x8e)) {
continue;
}
- while (inb(wkport + 0x17) != 0x8e)
+ while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
try_sync:
j = 0;
- outb(0x06, wkport + 0x14);
- outb(0x20, wkport + 0x18);
+ atp_writeb_io(dev, c, 0x14, 0x06);
+ atp_writeb_io(dev, c, 0x18, 0x20);
- while ((inb(wkport + 0x1f) & 0x80) == 0) {
- if ((inb(wkport + 0x1f) & 0x01) != 0) {
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0) {
if ((m & dev->wide_id[c]) != 0) {
if ((m & dev->ultra_map[c]) != 0) {
- outb(synuw[j++], wkport + 0x19);
+ atp_writeb_io(dev, c, 0x19, synuw[j++]);
} else {
- outb(synw[j++], wkport + 0x19);
+ atp_writeb_io(dev, c, 0x19, synw[j++]);
}
} else {
if ((m & dev->ultra_map[c]) != 0) {
- outb(synu[j++], wkport + 0x19);
+ atp_writeb_io(dev, c, 0x19, synu[j++]);
} else {
- outb(synn[j++], wkport + 0x19);
+ atp_writeb_io(dev, c, 0x19, synn[j++]);
}
}
}
}
- while ((inb(wkport + 0x17) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, c, 0x17) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x17) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
@@ -3272,13 +3272,13 @@ try_sync:
}
continue;
phase_outs:
- outb(0x20, wkport + 0x18);
- while ((inb(wkport + 0x1f) & 0x80) == 0x00) {
- if ((inb(wkport + 0x1f) & 0x01) != 0x00)
- outb(0x00, wkport + 0x19);
+ atp_writeb_io(dev, c, 0x18, 0x20);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0x00)
+ atp_writeb_io(dev, c, 0x19, 0x00);
cpu_relax();
}
- j = inb(wkport + 0x17);
+ j = atp_readb_io(dev, c, 0x17);
if (j == 0x85) {
goto tar_dcons;
}
@@ -3294,20 +3294,20 @@ phase_outs:
}
continue;
phase_ins:
- outb(0x06, wkport + 0x14);
- outb(0x20, wkport + 0x18);
+ atp_writeb_io(dev, c, 0x14, 0x06);
+ atp_writeb_io(dev, c, 0x18, 0x20);
k = 0;
phase_ins1:
- j = inb(wkport + 0x1f);
+ j = atp_readb_io(dev, c, 0x1f);
if ((j & 0x01) != 0x00) {
- mbuf[k++] = inb(wkport + 0x19);
+ mbuf[k++] = atp_readb_io(dev, c, 0x19);
goto phase_ins1;
}
if ((j & 0x80) == 0x00) {
goto phase_ins1;
}
- while ((inb(wkport + 0x17) & 0x80) == 0x00);
- j = inb(wkport + 0x17);
+ while ((atp_readb_io(dev, c, 0x17) & 0x80) == 0x00);
+ j = atp_readb_io(dev, c, 0x17);
if (j == 0x85) {
goto tar_dcons;
}
@@ -3323,13 +3323,13 @@ phase_ins1:
}
continue;
phase_cmds:
- outb(0x30, wkport + 0x10);
+ atp_writeb_io(dev, c, 0x10, 0x30);
tar_dcons:
- outb(0x00, wkport + 0x14);
- outb(0x08, wkport + 0x18);
- while ((inb(wkport + 0x1f) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- j = inb(wkport + 0x17);
+ j = atp_readb_io(dev, c, 0x17);
if (j != 0x16) {
continue;
}
@@ -3376,7 +3376,7 @@ tar_dcons:
printk("dev->id[%2d][%2d].devsp = %2x\n",c,i,dev->id[c][i].devsp);
#endif
}
- outb(0x80, wkport + 0x16);
+ atp_writeb_io(dev, c, 0x16, 0x80);
}
module_init(atp870u_init);
--
Ondrej Zary
next prev parent reply other threads:[~2015-07-26 20:55 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-26 20:24 [PATCH 00/52] atp870u: Major rework Ondrej Zary
2015-07-26 20:24 ` [PATCH 01/52] atp870u: Remove workport Ondrej Zary
2015-07-26 20:24 ` [PATCH 02/52] atp870u: Remove tmport1 Ondrej Zary
2015-07-26 20:24 ` [PATCH 03/52] atp870u: Untangle tmport Ondrej Zary
2015-07-26 20:24 ` [PATCH 04/52] atp870u: Untangle tmport #2 Ondrej Zary
2015-07-26 20:24 ` [PATCH 05/52] atp870u: Untangle tmport #3 Ondrej Zary
2015-07-26 20:24 ` [PATCH 06/52] atp870u: Untangle tmport #4 Ondrej Zary
2015-07-26 20:24 ` [PATCH 07/52] atp870u: Untangle tmport #5 Ondrej Zary
2015-07-26 20:24 ` [PATCH 08/52] atp870u: Untangle tmport #6 Ondrej Zary
2015-07-26 20:24 ` [PATCH 09/52] atp870u: Untangle tmport #7 Ondrej Zary
2015-07-26 20:24 ` [PATCH 10/52] atp870u: Untangle tmport #8 Ondrej Zary
2015-07-26 20:24 ` [PATCH 11/52] atp870u: Untangle tmpcip Ondrej Zary
2015-07-26 20:24 ` [PATCH 12/52] atp870u: Untangle tmpcip #2 Ondrej Zary
2015-07-26 20:24 ` [PATCH 13/52] atp870u: Remove ugly gotos Ondrej Zary
2015-07-26 20:24 ` [PATCH 14/52] atp870u: Remove ugly gotos #2 Ondrej Zary
2015-07-26 20:24 ` [PATCH 15/52] atp870u: Remove ugly gotos #3 Ondrej Zary
2015-07-26 20:24 ` [PATCH 16/52] atp870u: Remove ugly gotos #4 Ondrej Zary
2015-07-26 20:24 ` [PATCH 17/52] atp870u: Remove ugly gotos #5 Ondrej Zary
2015-07-26 20:24 ` [PATCH 18/52] atp870u: Introduce HW access wrappers Ondrej Zary
2015-07-26 20:24 ` [PATCH 19/52] atp870u: Convert is870() to use wrappers Ondrej Zary
2015-07-26 20:24 ` [PATCH 20/52] atp870u: Convert is880() " Ondrej Zary
2015-07-26 20:24 ` Ondrej Zary [this message]
2015-07-26 20:24 ` [PATCH 22/52] atp870u: Unify code format in is870(), is880() and is885() Ondrej Zary
2015-07-26 20:24 ` [PATCH 23/52] atp870u: Add channel parameter to is870() and is880() Ondrej Zary
2015-07-26 20:24 ` [PATCH 24/52] atp870u: Move chip-specific lines out of is880() and is885() Ondrej Zary
2015-07-26 20:24 ` [PATCH 25/52] atp870u: Remove is880() Ondrej Zary
2015-07-26 20:24 ` [PATCH 26/52] atp870u: Add wide_chip parameter to is870() and is885() Ondrej Zary
2015-07-26 20:24 ` [PATCH 27/52] atp870u: Add remaining 870 support to is885() Ondrej Zary
2015-07-26 20:24 ` [PATCH 28/52] atp870u: Move 870-specific code out of is870() Ondrej Zary
2015-07-26 20:24 ` [PATCH 29/52] atp870u: Remove is870() Ondrej Zary
2015-07-26 20:24 ` [PATCH 30/52] atp870u: Rename is885() to atp_is() Ondrej Zary
2015-07-26 20:24 ` [PATCH 31/52] atp870u: Convert remaining in[bwl] and out[bwl] to wrappers Ondrej Zary
2015-07-26 20:24 ` [PATCH 32/52] atp870u: Replace port 0x80 delay by udelay Ondrej Zary
2015-07-26 20:24 ` [PATCH 33/52] atp870u: Fix incorrect writeb_io access to register 0x3a Ondrej Zary
2015-07-26 20:24 ` [PATCH 34/52] atp870u: Introduce atp_set_host_id Ondrej Zary
2015-07-26 20:24 ` [PATCH 35/52] atp870u: Reduce log spam on module load/unload Ondrej Zary
2015-07-26 20:24 ` [PATCH 36/52] atp870u: Remove empty tscam_885() Ondrej Zary
2015-07-26 20:24 ` [PATCH 37/52] atp870u: Use module_pci_driver Ondrej Zary
2015-07-26 20:24 ` [PATCH 38/52] atp870u: Use n_io_port in request_region and release_region Ondrej Zary
2015-07-26 20:24 ` [PATCH 39/52] atp870u: Remove useless and broken card counting Ondrej Zary
2015-07-26 20:24 ` [PATCH 40/52] atp870u: Remove unused irq from struct atp_unit Ondrej Zary
2015-07-26 20:24 ` [PATCH 41/52] atp870u: Improve _probe() Ondrej Zary
2015-07-26 20:24 ` [PATCH 42/52] atp870u: Improve unsupported chip detection Ondrej Zary
2015-07-26 20:24 ` [PATCH 43/52] atp870u: Remove chip_ver from struct atp_unit Ondrej Zary
2015-07-26 20:24 ` [PATCH 44/52] atp870u: Simplify _probe() Ondrej Zary
2015-07-26 20:24 ` [PATCH 45/52] atp870u: Introduce is880(), is885() and remove dev_id Ondrej Zary
2015-07-26 20:24 ` [PATCH 46/52] atp870u: Use pci_request_regions Ondrej Zary
2015-07-26 20:24 ` [PATCH 47/52] atp870u: Request IRQ later, remove weird locking Ondrej Zary
2015-07-26 20:24 ` [PATCH 48/52] atp870u: Remove scam_on from struct atp_unit Ondrej Zary
2015-07-26 20:24 ` [PATCH 49/52] atp870u: Initialize tables earlier Ondrej Zary
2015-07-26 20:24 ` [PATCH 50/52] atp870u: Introduce atp880_init() Ondrej Zary
2015-07-26 20:24 ` [PATCH 51/52] atp870u: Introduce atp885_init() Ondrej Zary
2015-07-26 20:24 ` [PATCH 52/52] atp870u: Introduce atp870_init() Ondrej Zary
2015-07-27 8:56 ` [PATCH 00/52] atp870u: Major rework Hannes Reinecke
2015-10-04 7:57 ` Christoph Hellwig
-- strict thread matches above, loose matches on Subject: below --
2015-11-17 18:23 [PATCH 00/52] [resend] " Ondrej Zary
2015-11-17 18:23 ` [PATCH 21/52] atp870u: Convert is885() to use wrappers Ondrej Zary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437942299-26674-22-git-send-email-linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).