linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yaniv Gardi <ygardi@codeaurora.org>
To: robherring2@gmail.com, James.Bottomley@HansenPartnership.com,
	pebolle@tiscali.nl, hch@infradead.org
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, santoshsy@gmail.com,
	linux-scsi-owner@vger.kernel.org, subhashj@codeaurora.org,
	ygardi@codeaurora.org, gbroner@codeaurora.org,
	draviv@codeaurora.org, Kishon Vijay Abraham I <kishon@ti.com>
Subject: [PATCH v3 1/8] phy: qcom-ufs: fix build error when the component is built as a module
Date: Sun, 23 Aug 2015 16:09:34 +0300	[thread overview]
Message-ID: <1440335381-5122-2-git-send-email-ygardi@codeaurora.org> (raw)
In-Reply-To: <1440335381-5122-1-git-send-email-ygardi@codeaurora.org>

Export the following functions in order to avoid build errors
when the component PHY_QCOM_UFS is compiled as a module:

ERROR: "ufs_qcom_phy_disable_ref_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_enable_ref_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_is_pcs_ready"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_disable_iface_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_start_serdes"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_calibrate_phy"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_enable_dev_ref_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_set_tx_lane_enable"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_disable_dev_ref_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_save_controller_version"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_enable_iface_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
make[1]: *** [__modpost] Error 1

Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>

---
 drivers/phy/phy-qcom-ufs.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
index f9c618f..6140a8b 100644
--- a/drivers/phy/phy-qcom-ufs.c
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -432,6 +432,7 @@ out_disable_src:
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_ref_clk);
 
 static
 int ufs_qcom_phy_disable_vreg(struct phy *phy,
@@ -474,6 +475,7 @@ void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
 		phy->is_ref_clk_enabled = false;
 	}
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_ref_clk);
 
 #define UFS_REF_CLK_EN	(1 << 5)
 
@@ -517,11 +519,13 @@ void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy)
 {
 	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_dev_ref_clk);
 
 void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
 {
 	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk);
 
 /* Turn ON M-PHY RMMI interface clocks */
 int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
@@ -550,6 +554,7 @@ int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_iface_clk);
 
 /* Turn OFF M-PHY RMMI interface clocks */
 void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
@@ -562,6 +567,7 @@ void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
 		phy->is_iface_clk_enabled = false;
 	}
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_iface_clk);
 
 int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
 {
@@ -578,6 +584,7 @@ int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
 
 int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
 {
@@ -595,6 +602,7 @@ int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable);
 
 void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
 					  u8 major, u16 minor, u16 step)
@@ -605,6 +613,7 @@ void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
 	ufs_qcom_phy->host_ctrl_rev_minor = minor;
 	ufs_qcom_phy->host_ctrl_rev_step = step;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
 
 int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
 {
@@ -625,6 +634,7 @@ int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
 
 int ufs_qcom_phy_remove(struct phy *generic_phy,
 			struct ufs_qcom_phy *ufs_qcom_phy)
@@ -662,6 +672,7 @@ int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
 	return ufs_qcom_phy->phy_spec_ops->
 			is_physical_coding_sublayer_ready(ufs_qcom_phy);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
 
 int ufs_qcom_phy_power_on(struct phy *generic_phy)
 {
-- 
1.8.5.2

-- 
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  reply	other threads:[~2015-08-23 13:10 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-23 13:09 [PATCH v2 0/8] Fix error message and present UFS variant Yaniv Gardi
2015-08-23 13:09 ` Yaniv Gardi [this message]
2015-08-25 11:52   ` [PATCH v3 1/8] phy: qcom-ufs: fix build error when the component is built as a module ygardi
2015-08-23 13:09 ` [PATCH v3 2/8] scsi: ufs-qcom: fix compilation warning if compiled " Yaniv Gardi
2015-08-25 11:53   ` ygardi
2015-08-23 13:09 ` [PATCH v3 3/8] scsi: ufs-qcom: update configuration option of SCSI_UFS_QCOM component Yaniv Gardi
2015-08-25 11:53   ` ygardi
2015-08-23 13:09 ` [PATCH v3 4/8] add ufshcd_get_variant ufshcd_set_variant Yaniv Gardi
2015-08-25 11:53   ` ygardi
2015-08-23 13:09 ` [PATCH v3 5/8] scsi: ufs: creates wrapper functions for vops Yaniv Gardi
2015-08-25 11:53   ` ygardi
2015-08-23 13:09 ` [PATCH v3 6/8] scsi: ufs: make the UFS variant a platform device Yaniv Gardi
2015-08-25 11:54   ` ygardi
2015-08-27 17:56   ` Rob Herring
2015-08-30  8:43     ` ygardi
2015-08-30 13:18       ` Rob Herring
2015-10-25  9:24         ` ygardi
2015-10-25  9:31     ` ygardi
2015-08-23 13:09 ` [PATCH v3 7/8] scsi: ufs-qcom: add debug prints for test bus Yaniv Gardi
2015-08-25 11:54   ` ygardi
2015-08-23 13:09 ` [PATCH v3 8/8] scsi: ufs-qcom: add QUniPro hardware support and power optimizations Yaniv Gardi
2015-08-25 11:55   ` ygardi
2015-08-24 23:47 ` [PATCH v2 0/8] Fix error message and present UFS variant Akinobu Mita
2015-08-25 11:49   ` ygardi
2015-10-20  8:03   ` ygardi
2015-08-25 11:52 ` [PATCH v3 " ygardi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1440335381-5122-2-git-send-email-ygardi@codeaurora.org \
    --to=ygardi@codeaurora.org \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=draviv@codeaurora.org \
    --cc=gbroner@codeaurora.org \
    --cc=hch@infradead.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi-owner@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=pebolle@tiscali.nl \
    --cc=robherring2@gmail.com \
    --cc=santoshsy@gmail.com \
    --cc=subhashj@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).