From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: QLogic-Storage-Upstream@qlogic.com, linux-scsi@vger.kernel.org,
"James E.J. Bottomley" <JBottomley@odin.com>
Cc: Oleksandr Khoshaba <oleksandr.khoshaba@gmail.com>,
Oleksandr Khoshaba <Oleksandr.Khoshaba@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH 1/1] scsi: qla4xxx: print MAC and SID via %p[mM][R]
Date: Wed, 30 Sep 2015 20:14:44 +0300 [thread overview]
Message-ID: <1443633284-14633-1-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
From: Oleksandr Khoshaba <oleksandr.khoshaba@gmail.com>
In the kernel we have nice specifier to print MAC by given pointer to the
address in binary form.
Signed-off-by: Oleksandr Khoshaba <Oleksandr.Khoshaba@gmail.com>
Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/scsi/qla4xxx/ql4_mbx.c | 5 +----
drivers/scsi/qla4xxx/ql4_nx.c | 8 ++------
drivers/scsi/qla4xxx/ql4_os.c | 15 ++++-----------
3 files changed, 7 insertions(+), 21 deletions(-)
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index c291fdf..1da04f3 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -2032,10 +2032,7 @@ int qla4xxx_set_param_ddbentry(struct scsi_qla_host *ha,
ptid = (uint16_t *)&fw_ddb_entry->isid[1];
*ptid = cpu_to_le16((uint16_t)ddb_entry->sess->target_id);
- DEBUG2(ql4_printk(KERN_INFO, ha, "ISID [%02x%02x%02x%02x%02x%02x]\n",
- fw_ddb_entry->isid[5], fw_ddb_entry->isid[4],
- fw_ddb_entry->isid[3], fw_ddb_entry->isid[2],
- fw_ddb_entry->isid[1], fw_ddb_entry->isid[0]));
+ DEBUG2(ql4_printk(KERN_INFO, ha, "ISID [%pmR]\n", fw_ddb_entry->isid));
iscsi_opts = le16_to_cpu(fw_ddb_entry->iscsi_options);
memset(fw_ddb_entry->iscsi_alias, 0, sizeof(fw_ddb_entry->iscsi_alias));
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 7c33658..05a4b77 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -4094,12 +4094,8 @@ int qla4_8xxx_get_sys_info(struct scsi_qla_host *ha)
ha->phy_port_num = sys_info->port_num;
ha->iscsi_pci_func_cnt = sys_info->iscsi_pci_func_cnt;
- DEBUG2(printk("scsi%ld: %s: "
- "mac %02x:%02x:%02x:%02x:%02x:%02x "
- "serial %s\n", ha->host_no, __func__,
- ha->my_mac[0], ha->my_mac[1], ha->my_mac[2],
- ha->my_mac[3], ha->my_mac[4], ha->my_mac[5],
- ha->serial_number));
+ DEBUG2(printk("scsi%ld: %s: mac %pM serial %s\n",
+ ha->host_no, __func__, ha->my_mac, ha->serial_number));
status = QLA_SUCCESS;
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 6d25879..0cc230d 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -6305,13 +6305,9 @@ static int qla4xxx_compare_tuple_ddb(struct scsi_qla_host *ha,
* ISID would not match firmware generated ISID.
*/
if (is_isid_compare) {
- DEBUG2(ql4_printk(KERN_INFO, ha, "%s: old ISID [%02x%02x%02x"
- "%02x%02x%02x] New ISID [%02x%02x%02x%02x%02x%02x]\n",
- __func__, old_tddb->isid[5], old_tddb->isid[4],
- old_tddb->isid[3], old_tddb->isid[2], old_tddb->isid[1],
- old_tddb->isid[0], new_tddb->isid[5], new_tddb->isid[4],
- new_tddb->isid[3], new_tddb->isid[2], new_tddb->isid[1],
- new_tddb->isid[0]));
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: old ISID [%pmR] New ISID [%pmR]\n",
+ __func__, old_tddb->isid, new_tddb->isid));
if (memcmp(&old_tddb->isid[0], &new_tddb->isid[0],
sizeof(old_tddb->isid)))
@@ -7926,10 +7922,7 @@ qla4xxx_sysfs_ddb_get_param(struct iscsi_bus_flash_session *fnode_sess,
rc = sprintf(buf, "%u\n", fnode_conn->keepalive_timeout);
break;
case ISCSI_FLASHNODE_ISID:
- rc = sprintf(buf, "%02x%02x%02x%02x%02x%02x\n",
- fnode_sess->isid[0], fnode_sess->isid[1],
- fnode_sess->isid[2], fnode_sess->isid[3],
- fnode_sess->isid[4], fnode_sess->isid[5]);
+ rc = sprintf(buf, "%pm\n", fnode_sess->isid);
break;
case ISCSI_FLASHNODE_TSID:
rc = sprintf(buf, "%u\n", fnode_sess->tsid);
--
2.5.1
reply other threads:[~2015-09-30 17:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443633284-14633-1-git-send-email-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=JBottomley@odin.com \
--cc=QLogic-Storage-Upstream@qlogic.com \
--cc=linux-scsi@vger.kernel.org \
--cc=oleksandr.khoshaba@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).