From: Christoph Hellwig <hch@lst.de>
To: James Bottomley <james.bottomley@hansenpartnership.com>
Cc: atoth@atoth.sote.hu, aradford@gmail.com, linux-scsi@vger.kernel.org
Subject: [PATCH] 3w-9xxx: don't unmap bounce buffered commands
Date: Sat, 3 Oct 2015 19:16:07 +0200 [thread overview]
Message-ID: <1443892567-9562-2-git-send-email-hch@lst.de> (raw)
In-Reply-To: <1443892567-9562-1-git-send-email-hch@lst.de>
3w controller don't dma map small single SGL entry commands but instead
bounce buffer them. Add a helper to identify these commands and don't
call scsi_dma_unmap for them.
Based on an earlier patch from James Bottomley.
Fixes: 118c85 ("3w-9xxx: fix command completion race")
Reported-by: T??th Attila <atoth@atoth.sote.hu>
Tested-by: T??th Attila <atoth@atoth.sote.hu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/scsi/3w-9xxx.c | 28 +++++++++++++++++++++-------
1 file changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index add419d..a56a7b2 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -212,6 +212,17 @@ static const struct file_operations twa_fops = {
.llseek = noop_llseek,
};
+/*
+ * The controllers use an inline buffer instead of a mapped SGL for small,
+ * single entry buffers. Note that we treat a zero-length transfer like
+ * a mapped SGL.
+ */
+static bool twa_command_mapped(struct scsi_cmnd *cmd)
+{
+ return scsi_sg_count(cmd) != 1 ||
+ scsi_bufflen(cmd) >= TW_MIN_SGL_LENGTH;
+}
+
/* This function will complete an aen request from the isr */
static int twa_aen_complete(TW_Device_Extension *tw_dev, int request_id)
{
@@ -1339,7 +1350,8 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance)
}
/* Now complete the io */
- scsi_dma_unmap(cmd);
+ if (twa_command_mapped(cmd))
+ scsi_dma_unmap(cmd);
cmd->scsi_done(cmd);
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
@@ -1582,7 +1594,8 @@ static int twa_reset_device_extension(TW_Device_Extension *tw_dev)
struct scsi_cmnd *cmd = tw_dev->srb[i];
cmd->result = (DID_RESET << 16);
- scsi_dma_unmap(cmd);
+ if (twa_command_mapped(cmd))
+ scsi_dma_unmap(cmd);
cmd->scsi_done(cmd);
}
}
@@ -1765,12 +1778,14 @@ static int twa_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_
retval = twa_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL);
switch (retval) {
case SCSI_MLQUEUE_HOST_BUSY:
- scsi_dma_unmap(SCpnt);
+ if (twa_command_mapped(SCpnt))
+ scsi_dma_unmap(SCpnt);
twa_free_request_id(tw_dev, request_id);
break;
case 1:
SCpnt->result = (DID_ERROR << 16);
- scsi_dma_unmap(SCpnt);
+ if (twa_command_mapped(SCpnt))
+ scsi_dma_unmap(SCpnt);
done(SCpnt);
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
@@ -1831,8 +1846,7 @@ static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
/* Map sglist from scsi layer to cmd packet */
if (scsi_sg_count(srb)) {
- if ((scsi_sg_count(srb) == 1) &&
- (scsi_bufflen(srb) < TW_MIN_SGL_LENGTH)) {
+ if (!twa_command_mapped(srb)) {
if (srb->sc_data_direction == DMA_TO_DEVICE ||
srb->sc_data_direction == DMA_BIDIRECTIONAL)
scsi_sg_copy_to_buffer(srb,
@@ -1905,7 +1919,7 @@ static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int re
{
struct scsi_cmnd *cmd = tw_dev->srb[request_id];
- if (scsi_bufflen(cmd) < TW_MIN_SGL_LENGTH &&
+ if (!twa_command_mapped(cmd) &&
(cmd->sc_data_direction == DMA_FROM_DEVICE ||
cmd->sc_data_direction == DMA_BIDIRECTIONAL)) {
if (scsi_sg_count(cmd) == 1) {
--
1.9.1
next prev parent reply other threads:[~2015-10-03 17:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-03 17:16 3w-9xxxx dma unmap fix Christoph Hellwig
2015-10-03 17:16 ` Christoph Hellwig [this message]
2015-10-06 0:52 ` [PATCH] 3w-9xxx: don't unmap bounce buffered commands adam radford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443892567-9562-2-git-send-email-hch@lst.de \
--to=hch@lst.de \
--cc=aradford@gmail.com \
--cc=atoth@atoth.sote.hu \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).