From: John Garry <john.garry@huawei.com>
To: JBottomley@odin.com, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, arnd@arndb.de
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linuxarm@huawei.com,
john.garry2@mail.dcu.ie, hare@suse.de, xuwei5@hisilicon.com,
zhangfei.gao@linaro.org, John Garry <john.garry@huawei.com>
Subject: [PATCH v2 25/32] scsi: hisi_sas: add abnormal irq handler
Date: Mon, 26 Oct 2015 22:14:56 +0800 [thread overview]
Message-ID: <1445868903-183817-26-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1445868903-183817-1-git-send-email-john.garry@huawei.com>
Add abnormal irq handler. This handler is concerned with
phy down event.
Also add port formed and port deformed handlers.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 2 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 136 +++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 70 +++++++++++++++++
3 files changed, 208 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index fc2457f..e52f5d3 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -139,6 +139,7 @@ struct hisi_sas_hw {
struct hisi_sas_slot *slot, int abort);
void (*free_device)(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
+ int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
int complete_hdr_size;
};
@@ -344,6 +345,7 @@ extern int hisi_sas_probe(struct platform_device *pdev,
const struct hisi_sas_hw *ops);
extern int hisi_sas_remove(struct platform_device *pdev);
+extern void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy);
extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
struct sas_task *task,
struct hisi_sas_slot *slot);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 9e62eda..88bf72f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -454,6 +454,89 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
INIT_WORK(&phy->phyup_ws, hisi_sas_phyup_work);
}
+static void hisi_sas_port_notify_formed(struct asd_sas_phy *sas_phy, int lock)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct hisi_hba *hisi_hba = NULL;
+ int i = 0;
+ struct hisi_sas_phy *phy = sas_phy->lldd_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+ struct hisi_sas_port *port;
+ unsigned long flags = 0;
+
+ if (!sas_port)
+ return;
+
+ while (sas_ha->sas_phy[i]) {
+ if (sas_ha->sas_phy[i] == sas_phy) {
+ hisi_hba = (struct hisi_hba *)sas_ha->lldd_ha;
+ port = &hisi_hba->port[i];
+ break;
+ }
+ i++;
+ }
+
+ if (hisi_hba == NULL) {
+ pr_err("%s: could not find hba\n", __func__);
+ return;
+ }
+
+ if (lock)
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ port->port_attached = 1;
+ port->id = phy->port_id;
+ phy->port = port;
+ sas_port->lldd_port = port;
+
+ if (lock)
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+}
+
+static void hisi_sas_do_release_task(struct hisi_hba *hisi_hba,
+ int phy_no, struct domain_device *device)
+{
+ struct hisi_sas_phy *phy;
+ struct hisi_sas_port *port;
+ struct hisi_sas_slot *slot, *slot2;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ phy = &hisi_hba->phy[phy_no];
+ port = phy->port;
+ if (!port)
+ return;
+
+ list_for_each_entry_safe(slot, slot2, &port->list, entry) {
+ struct sas_task *task;
+
+ task = slot->task;
+ if (device && task->dev != device)
+ continue;
+
+ dev_info(dev, "Release slot [%d:%d], task [%p]:\n",
+ slot->dlvry_queue, slot->dlvry_queue_slot, task);
+ hisi_hba->hw->slot_complete(hisi_hba, slot, 1);
+ }
+}
+
+static void hisi_sas_port_notify_deformed(struct asd_sas_phy *sas_phy,
+ int lock)
+{
+ struct domain_device *device;
+ struct hisi_sas_phy *phy = sas_phy->lldd_phy;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct asd_sas_port *sas_port = sas_phy->port;
+ int phy_no = 0;
+
+ while (phy != &hisi_hba->phy[phy_no]) {
+ phy_no++;
+
+ if (phy_no >= hisi_hba->n_phy)
+ return;
+ }
+ list_for_each_entry(device, &sas_port->dev_list, dev_list_node)
+ hisi_sas_do_release_task(phy->hisi_hba, phy_no, device);
+}
+
static int hisi_sas_dev_found(struct domain_device *device)
{
return hisi_sas_dev_found_notify(device, 1);
@@ -488,6 +571,57 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
return hisi_sas_task_exec(task, gfp_flags, NULL, 0, NULL);
}
+
+static void hisi_sas_port_formed(struct asd_sas_phy *sas_phy)
+{
+ hisi_sas_port_notify_formed(sas_phy, 1);
+}
+
+static void hisi_sas_port_deformed(struct asd_sas_phy *sas_phy)
+{
+ hisi_sas_port_notify_deformed(sas_phy, 1);
+}
+
+static void hisi_sas_phy_disconnected(struct hisi_sas_phy *phy)
+{
+ phy->phy_attached = 0;
+ phy->phy_type = 0;
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ phy->port = NULL;
+}
+
+void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+
+ if (rdy) {
+ /* Phy down but ready */
+ hisi_sas_bytes_dmaed(hisi_hba, phy_no);
+ hisi_sas_port_notify_formed(sas_phy, 0);
+ } else {
+ struct hisi_sas_port *port = phy->port;
+
+ /* Phy down and not ready */
+ sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
+ sas_phy_disconnected(sas_phy);
+
+ if (port) {
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ int port_id = port->id;
+
+ if (!hisi_hba->hw->get_wideport_bitmap(hisi_hba,
+ port_id))
+ port->port_attached = 0;
+ } else if (phy->phy_type & PORT_TYPE_SATA)
+ port->port_attached = 0;
+ }
+ hisi_sas_phy_disconnected(phy);
+ }
+}
+EXPORT_SYMBOL_GPL(hisi_sas_phy_down);
+
static struct scsi_transport_template *hisi_sas_stt;
static struct scsi_host_template hisi_sas_sht = {
@@ -513,6 +647,8 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
.lldd_dev_found = hisi_sas_dev_found,
.lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
+ .lldd_port_formed = hisi_sas_port_formed,
+ .lldd_port_deformed = hisi_sas_port_deformed,
};
static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index f9ebe7e..8a9498e74 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -809,6 +809,18 @@ static void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
}
+static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
+{
+ int i, bitmap = 0;
+ u32 phy_port_num_ma = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
+ bitmap |= 1 << i;
+
+ return bitmap;
+}
+
/**
* This function allocates across all queues to load balance.
* It uses the current cpu as the method to balance the
@@ -1339,6 +1351,61 @@ end:
return res;
}
+static irqreturn_t int_abnormal_v1_hw(int irq, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ u32 irq_value, irq_mask_old;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int phy_no = sas_phy->id;
+
+ /* mask_int0 */
+ irq_mask_old = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0_MSK);
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3fffff);
+
+ /* read int0 */
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
+
+ if (irq_value & CHL_INT0_PHYCTRL_NOTRDY_MSK) {
+ u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
+
+ hisi_sas_phy_down(hisi_hba, phy_no,
+ (phy_state & 1 << phy_no) ? 1 : 0);
+ }
+
+ if (irq_value & CHL_INT0_ID_TIMEOUT_MSK)
+ dev_dbg(dev, "abnormal: ID_TIMEOUT phy%d identify timeout\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_DWS_LOST_MSK)
+ dev_dbg(dev, "abnormal: DWS_LOST phy%d dws lost\n", phy_no);
+
+ if (irq_value & CHL_INT0_SN_FAIL_NGR_MSK)
+ dev_dbg(dev, "abnormal: SN_FAIL_NGR phy%d sn fail ngr\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_SL_IDAF_FAIL_MSK ||
+ irq_value & CHL_INT0_SL_OPAF_FAIL_MSK)
+ dev_dbg(dev, "abnormal: SL_ID/OPAF_FAIL phy%d check adr frm err\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_SL_PS_FAIL_OFF)
+ dev_dbg(dev, "abnormal: SL_PS_FAIL phy%d fail\n", phy_no);
+
+ /* write to zero */
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, irq_value);
+
+ if (irq_value & CHL_INT0_PHYCTRL_NOTRDY_MSK)
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK,
+ 0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
+ else
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK,
+ irq_mask_old);
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
{
struct hisi_sas_cq *cq = p;
@@ -1391,11 +1458,13 @@ static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
{"Phy Up"},
+ {"Abnormal"},
};
static const char cq_int_name[32] = "cq";
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_phyup_v1_hw,
+ int_abnormal_v1_hw
};
static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
@@ -1520,6 +1589,7 @@ static const struct hisi_sas_hw hisi_sas_v1_hw = {
.get_free_slot = get_free_slot_v1_hw,
.start_delivery = start_delivery_v1_hw,
.slot_complete = slot_complete_v1_hw,
+ .get_wideport_bitmap = get_wideport_bitmap_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
next prev parent reply other threads:[~2015-10-26 14:14 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-26 14:14 [PATCH v2 00/32] HiSilicon SAS driver John Garry
2015-10-26 14:14 ` [PATCH v2 01/32] [SCSI] sas: centralise ssp frame information units John Garry
2015-10-26 14:14 ` [PATCH v2 02/32] devicetree: bindings: scsi: HiSi SAS John Garry
2015-10-26 14:45 ` Mark Rutland
2015-10-27 13:09 ` John Garry
2015-10-27 14:39 ` Mark Rutland
2015-10-27 14:54 ` zhangfei
2015-10-27 15:03 ` Mark Rutland
[not found] ` <562F9016.50807-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-10-27 15:06 ` John Garry
[not found] ` <1445868903-183817-3-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-26 14:55 ` John Garry
2015-10-26 14:14 ` [PATCH v2 03/32] scsi: hisi_sas: add initial bare main driver John Garry
2015-10-26 14:14 ` [PATCH v2 04/32] scsi: hisi_sas: add scsi host registration John Garry
[not found] ` <1445868903-183817-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-26 14:14 ` [PATCH v2 05/32] scsi: hisi_sas: scan device tree John Garry
[not found] ` <1445868903-183817-6-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-26 14:48 ` Mark Rutland
2015-10-26 14:51 ` John Garry
2015-10-26 19:55 ` kbuild test robot
2015-10-26 14:14 ` [PATCH v2 19/32] scsi: hisi_sas: add v1 HW initialisation code John Garry
2015-10-26 14:14 ` [PATCH v2 06/32] scsi: hisi_sas: add HW DMA structures John Garry
2015-10-26 14:14 ` [PATCH v2 07/32] scsi: hisi_sas: allocate memories and create pools John Garry
2015-10-26 14:14 ` [PATCH v2 08/32] scsi: hisi_sas: add hisi_sas_remove John Garry
2015-10-26 14:14 ` [PATCH v2 09/32] scsi: hisi_sas: add slot init code John Garry
2015-10-26 14:14 ` [PATCH v2 10/32] scsi: hisi_sas: add cq structure initialization John Garry
2015-10-26 14:14 ` [PATCH v2 11/32] scsi: hisi_sas: add phy SAS ADDR initialization John Garry
2015-10-26 14:14 ` [PATCH v2 12/32] scsi: hisi_sas: set dev DMA mask John Garry
2015-10-26 14:14 ` [PATCH v2 13/32] scsi: hisi_sas: add hisi_hba workqueue John Garry
2015-10-26 14:14 ` [PATCH v2 14/32] scsi: hisi_sas: add hisi sas device type John Garry
2015-10-26 14:14 ` [PATCH v2 15/32] scsi: hisi_sas: add phy and port init John Garry
2015-10-26 14:14 ` [PATCH v2 16/32] scsi: hisi_sas: add timer and spinlock init John Garry
2015-10-26 14:14 ` [PATCH v2 17/32] scsi: hisi_sas: add v1 hw module init John Garry
2015-10-26 14:14 ` [PATCH v2 18/32] scsi: hisi_sas: add v1 hardware register definitions John Garry
2015-10-26 14:14 ` [PATCH v2 20/32] scsi: hisi_sas: add v1 hw interrupt init John Garry
2015-10-26 14:14 ` [PATCH v2 21/32] scsi: hisi_sas: add path from phyup irq to SAS framework John Garry
2015-10-26 14:14 ` [PATCH v2 22/32] scsi: hisi_sas: add ssp command function John Garry
2015-10-26 14:14 ` [PATCH v2 23/32] scsi: hisi_sas: add cq interrupt handler John Garry
2015-10-26 14:14 ` [PATCH v2 24/32] scsi: hisi_sas: add dev_found and port_formed John Garry
2015-10-26 14:14 ` John Garry [this message]
[not found] ` <1445868903-183817-26-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-30 14:10 ` [PATCH v2 25/32] scsi: hisi_sas: add abnormal irq handler Arnd Bergmann
2015-10-30 16:58 ` John Garry
2015-10-26 14:14 ` [PATCH v2 26/32] scsi: hisi_sas: add bcast interrupt handler John Garry
2015-10-26 14:14 ` [PATCH v2 27/32] scsi: hisi_sas: add smp protocol support John Garry
[not found] ` <1445868903-183817-28-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-30 13:53 ` Arnd Bergmann
2015-10-30 16:22 ` John Garry
2015-11-02 17:03 ` John Garry
2015-11-02 20:29 ` Arnd Bergmann
2015-11-03 11:42 ` John Garry
[not found] ` <56389DA6.6070103-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-11-03 12:27 ` Arnd Bergmann
2015-10-26 14:14 ` [PATCH v2 28/32] scsi: hisi_sas: add scan finished and start John Garry
2015-10-26 14:15 ` [PATCH v2 29/32] scsi: hisi_sas: add tmf methods John Garry
2015-10-26 14:15 ` [PATCH v2 30/32] scsi: hisi_sas: add control phy handler John Garry
2015-10-26 14:15 ` [PATCH v2 31/32] scsi: hisi_sas: add fatal irq handler John Garry
2015-10-26 14:15 ` [PATCH v2 32/32] MAINTAINERS: add maintainer for HiSi SAS driver John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445868903-183817-26-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=JBottomley@odin.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=hare@suse.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=john.garry2@mail.dcu.ie \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=xuwei5@hisilicon.com \
--cc=zhangfei.gao@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).