linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: John Garry <john.garry@huawei.com>
To: JBottomley@odin.com, robh+dt@kernel.org, pawel.moll@arm.com,
	mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
	galak@codeaurora.org, arnd@arndb.de
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linuxarm@huawei.com,
	john.garry2@mail.dcu.ie, hare@suse.de, xuwei5@hisilicon.com,
	zhangfei.gao@linaro.org, John Garry <john.garry@huawei.com>
Subject: [PATCH v2 03/32] scsi: hisi_sas: add initial bare main driver
Date: Mon, 26 Oct 2015 22:14:34 +0800	[thread overview]
Message-ID: <1445868903-183817-4-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1445868903-183817-1-git-send-email-john.garry@huawei.com>

This patch adds the initial bare main driver for the
HiSilicon SAS HBA. This only introduces the changes to
build and load the main driver module.

The complete driver consists of the core main module and
also a module platform driver for driving the hw.

The HBA is a platform device.

Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/Kconfig                  |  1 +
 drivers/scsi/Makefile                 |  1 +
 drivers/scsi/hisi_sas/Kconfig         |  6 +++++
 drivers/scsi/hisi_sas/Makefile        |  1 +
 drivers/scsi/hisi_sas/hisi_sas.h      | 26 +++++++++++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_main.c | 44 +++++++++++++++++++++++++++++++++++
 6 files changed, 79 insertions(+)
 create mode 100644 drivers/scsi/hisi_sas/Kconfig
 create mode 100644 drivers/scsi/hisi_sas/Makefile
 create mode 100644 drivers/scsi/hisi_sas/hisi_sas.h
 create mode 100644 drivers/scsi/hisi_sas/hisi_sas_main.c

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 95f7a76..5c345f9 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1774,5 +1774,6 @@ source "drivers/scsi/pcmcia/Kconfig"
 source "drivers/scsi/device_handler/Kconfig"
 
 source "drivers/scsi/osd/Kconfig"
+source "drivers/scsi/hisi_sas/Kconfig"
 
 endmenu
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 1a8c9b5..03c30de 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -158,6 +158,7 @@ obj-$(CONFIG_CHR_DEV_SCH)	+= ch.o
 obj-$(CONFIG_SCSI_ENCLOSURE)	+= ses.o
 
 obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas/
 
 # This goes last, so that "real" scsi devices probe earlier
 obj-$(CONFIG_SCSI_DEBUG)	+= scsi_debug.o
diff --git a/drivers/scsi/hisi_sas/Kconfig b/drivers/scsi/hisi_sas/Kconfig
new file mode 100644
index 0000000..37a0c71
--- /dev/null
+++ b/drivers/scsi/hisi_sas/Kconfig
@@ -0,0 +1,6 @@
+config SCSI_HISI_SAS
+	tristate "HiSilicon SAS"
+	select SCSI_SAS_LIBSAS
+	select BLK_DEV_INTEGRITY
+	help
+		This driver supports HiSilicon's SAS HBA
diff --git a/drivers/scsi/hisi_sas/Makefile b/drivers/scsi/hisi_sas/Makefile
new file mode 100644
index 0000000..d86b05e
--- /dev/null
+++ b/drivers/scsi/hisi_sas/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SCSI_HISI_SAS)		+= hisi_sas_main.o
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
new file mode 100644
index 0000000..a5cec22
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef _HISI_SAS_H_
+#define _HISI_SAS_H_
+
+#include <linux/dmapool.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <scsi/libsas.h>
+
+#define DRV_VERSION "v1.0"
+
+#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
new file mode 100644
index 0000000..67977a3
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include "hisi_sas.h"
+#define DRV_NAME "hisi_sas"
+
+
+static struct scsi_transport_template *hisi_sas_stt;
+
+static struct sas_domain_function_template hisi_sas_transport_ops = {
+};
+
+static __init int hisi_sas_init(void)
+{
+	pr_info("hisi_sas: driver version %s\n", DRV_VERSION);
+
+	hisi_sas_stt = sas_domain_attach_transport(&hisi_sas_transport_ops);
+	if (!hisi_sas_stt)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static __exit void hisi_sas_exit(void)
+{
+	sas_release_transport(hisi_sas_stt);
+}
+
+module_init(hisi_sas_init);
+module_exit(hisi_sas_exit);
+
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
+MODULE_DESCRIPTION("HISILICON SAS controller driver");
+MODULE_ALIAS("platform:" DRV_NAME);
-- 
1.9.1

  parent reply	other threads:[~2015-10-26 14:14 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-26 14:14 [PATCH v2 00/32] HiSilicon SAS driver John Garry
2015-10-26 14:14 ` [PATCH v2 01/32] [SCSI] sas: centralise ssp frame information units John Garry
2015-10-26 14:14 ` [PATCH v2 02/32] devicetree: bindings: scsi: HiSi SAS John Garry
2015-10-26 14:45   ` Mark Rutland
2015-10-27 13:09     ` John Garry
2015-10-27 14:39       ` Mark Rutland
2015-10-27 14:54         ` zhangfei
2015-10-27 15:03           ` Mark Rutland
     [not found]           ` <562F9016.50807-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-10-27 15:06             ` John Garry
     [not found]   ` <1445868903-183817-3-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-26 14:55     ` John Garry
2015-10-26 14:14 ` John Garry [this message]
2015-10-26 14:14 ` [PATCH v2 04/32] scsi: hisi_sas: add scsi host registration John Garry
2015-10-26 14:14 ` [PATCH v2 06/32] scsi: hisi_sas: add HW DMA structures John Garry
2015-10-26 14:14 ` [PATCH v2 07/32] scsi: hisi_sas: allocate memories and create pools John Garry
2015-10-26 14:14 ` [PATCH v2 08/32] scsi: hisi_sas: add hisi_sas_remove John Garry
2015-10-26 14:14 ` [PATCH v2 09/32] scsi: hisi_sas: add slot init code John Garry
2015-10-26 14:14 ` [PATCH v2 10/32] scsi: hisi_sas: add cq structure initialization John Garry
2015-10-26 14:14 ` [PATCH v2 11/32] scsi: hisi_sas: add phy SAS ADDR initialization John Garry
2015-10-26 14:14 ` [PATCH v2 12/32] scsi: hisi_sas: set dev DMA mask John Garry
2015-10-26 14:14 ` [PATCH v2 13/32] scsi: hisi_sas: add hisi_hba workqueue John Garry
2015-10-26 14:14 ` [PATCH v2 14/32] scsi: hisi_sas: add hisi sas device type John Garry
2015-10-26 14:14 ` [PATCH v2 15/32] scsi: hisi_sas: add phy and port init John Garry
2015-10-26 14:14 ` [PATCH v2 16/32] scsi: hisi_sas: add timer and spinlock init John Garry
2015-10-26 14:14 ` [PATCH v2 17/32] scsi: hisi_sas: add v1 hw module init John Garry
2015-10-26 14:14 ` [PATCH v2 18/32] scsi: hisi_sas: add v1 hardware register definitions John Garry
     [not found] ` <1445868903-183817-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-26 14:14   ` [PATCH v2 05/32] scsi: hisi_sas: scan device tree John Garry
     [not found]     ` <1445868903-183817-6-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-26 14:48       ` Mark Rutland
2015-10-26 14:51         ` John Garry
2015-10-26 19:55       ` kbuild test robot
2015-10-26 14:14   ` [PATCH v2 19/32] scsi: hisi_sas: add v1 HW initialisation code John Garry
2015-10-26 14:14 ` [PATCH v2 20/32] scsi: hisi_sas: add v1 hw interrupt init John Garry
2015-10-26 14:14 ` [PATCH v2 21/32] scsi: hisi_sas: add path from phyup irq to SAS framework John Garry
2015-10-26 14:14 ` [PATCH v2 22/32] scsi: hisi_sas: add ssp command function John Garry
2015-10-26 14:14 ` [PATCH v2 23/32] scsi: hisi_sas: add cq interrupt handler John Garry
2015-10-26 14:14 ` [PATCH v2 24/32] scsi: hisi_sas: add dev_found and port_formed John Garry
2015-10-26 14:14 ` [PATCH v2 25/32] scsi: hisi_sas: add abnormal irq handler John Garry
     [not found]   ` <1445868903-183817-26-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-30 14:10     ` Arnd Bergmann
2015-10-30 16:58       ` John Garry
2015-10-26 14:14 ` [PATCH v2 26/32] scsi: hisi_sas: add bcast interrupt handler John Garry
2015-10-26 14:14 ` [PATCH v2 27/32] scsi: hisi_sas: add smp protocol support John Garry
     [not found]   ` <1445868903-183817-28-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-30 13:53     ` Arnd Bergmann
2015-10-30 16:22       ` John Garry
2015-11-02 17:03         ` John Garry
2015-11-02 20:29           ` Arnd Bergmann
2015-11-03 11:42             ` John Garry
     [not found]               ` <56389DA6.6070103-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-11-03 12:27                 ` Arnd Bergmann
2015-10-26 14:14 ` [PATCH v2 28/32] scsi: hisi_sas: add scan finished and start John Garry
2015-10-26 14:15 ` [PATCH v2 29/32] scsi: hisi_sas: add tmf methods John Garry
2015-10-26 14:15 ` [PATCH v2 30/32] scsi: hisi_sas: add control phy handler John Garry
2015-10-26 14:15 ` [PATCH v2 31/32] scsi: hisi_sas: add fatal irq handler John Garry
2015-10-26 14:15 ` [PATCH v2 32/32] MAINTAINERS: add maintainer for HiSi SAS driver John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445868903-183817-4-git-send-email-john.garry@huawei.com \
    --to=john.garry@huawei.com \
    --cc=JBottomley@odin.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=hare@suse.de \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=john.garry2@mail.dcu.ie \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=xuwei5@hisilicon.com \
    --cc=zhangfei.gao@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).