From: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: JBottomley-wo1vFcy6AUs@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org,
hare-l3A5Bk7waGM@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v2 05/32] scsi: hisi_sas: scan device tree
Date: Mon, 26 Oct 2015 22:14:36 +0800 [thread overview]
Message-ID: <1445868903-183817-6-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1445868903-183817-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Scan the device tree for all properties. Also
do this:
- do ioremap for SAS registers
- allocate memory for interrupt names
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 9 +++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 38 ++++++++++++++++++++++++++++++++++-
2 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 6f57fd1..ace4254 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -28,6 +28,9 @@
#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
#define HISI_SAS_COMMAND_ENTRIES 8192
+#define HISI_SAS_NAME_LEN 32
+#define HISI_SAS_CTRL_REG_CNT 5
+
struct hisi_sas_phy {
struct asd_sas_phy sas_phy;
};
@@ -44,6 +47,9 @@ struct hisi_hba {
struct sas_ha_struct *p;
struct platform_device *pdev;
+ void __iomem *regs;
+ struct regmap *ctrl;
+ u32 ctrl_reg[HISI_SAS_CTRL_REG_CNT];
u8 sas_addr[SAS_ADDR_SIZE];
int n_phy;
@@ -53,6 +59,9 @@ struct hisi_hba {
struct Scsi_Host *shost;
struct hisi_sas_phy phy[HISI_SAS_MAX_PHYS];
struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
+
+ int queue_count;
+ char *int_names;
const struct hisi_sas_hw *hw; /* Low level hw interface */
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7555307..91f6504 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -40,9 +40,13 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
const struct hisi_sas_hw *hw)
{
+ int num;
+ struct resource *res;
struct Scsi_Host *shost;
struct hisi_hba *hisi_hba;
struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+ struct property *sas_addr_prop;
shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
if (!shost)
@@ -54,6 +58,39 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
hisi_hba->shost = shost;
SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+ sas_addr_prop = of_find_property(np, "sas-addr", NULL);
+ if (!sas_addr_prop || (sas_addr_prop->length != SAS_ADDR_SIZE))
+ goto err_out;
+ memcpy(hisi_hba->sas_addr, sas_addr_prop->value, SAS_ADDR_SIZE);
+
+ if (of_property_read_u32_array(np, "ctrl-reg",
+ (u32 *) &hisi_hba->ctrl_reg,
+ HISI_SAS_CTRL_REG_CNT))
+ goto err_out;
+
+ if (of_property_read_u32(np, "phy-count", &hisi_hba->n_phy))
+ goto err_out;
+
+ if (of_property_read_u32(np, "queue-count", &hisi_hba->queue_count))
+ goto err_out;
+
+ num = of_irq_count(np);
+ hisi_hba->int_names = devm_kcalloc(dev, num,
+ HISI_SAS_NAME_LEN,
+ GFP_KERNEL);
+ if (!hisi_hba->int_names)
+ goto err_out;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hisi_hba->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(hisi_hba->regs))
+ goto err_out;
+
+ hisi_hba->ctrl = syscon_regmap_lookup_by_phandle(
+ np, "hisilicon,sas-syscon");
+ if (IS_ERR(hisi_hba->ctrl))
+ goto err_out;
+
return shost;
err_out:
dev_err(dev, "shost alloc failed\n");
@@ -80,7 +117,6 @@ int hisi_sas_probe(struct platform_device *pdev,
sha = SHOST_TO_SAS_HA(shost);
hisi_hba = shost_priv(shost);
platform_set_drvdata(pdev, sha);
- hisi_hba->n_phy = HISI_SAS_MAX_PHYS;
phy_nr = port_nr = hisi_hba->n_phy;
arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-10-26 14:14 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-26 14:14 [PATCH v2 00/32] HiSilicon SAS driver John Garry
2015-10-26 14:14 ` [PATCH v2 01/32] [SCSI] sas: centralise ssp frame information units John Garry
2015-10-26 14:14 ` [PATCH v2 02/32] devicetree: bindings: scsi: HiSi SAS John Garry
2015-10-26 14:45 ` Mark Rutland
2015-10-27 13:09 ` John Garry
2015-10-27 14:39 ` Mark Rutland
2015-10-27 14:54 ` zhangfei
2015-10-27 15:03 ` Mark Rutland
[not found] ` <562F9016.50807-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-10-27 15:06 ` John Garry
[not found] ` <1445868903-183817-3-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-26 14:55 ` John Garry
2015-10-26 14:14 ` [PATCH v2 03/32] scsi: hisi_sas: add initial bare main driver John Garry
2015-10-26 14:14 ` [PATCH v2 04/32] scsi: hisi_sas: add scsi host registration John Garry
[not found] ` <1445868903-183817-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-26 14:14 ` John Garry [this message]
[not found] ` <1445868903-183817-6-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-26 14:48 ` [PATCH v2 05/32] scsi: hisi_sas: scan device tree Mark Rutland
2015-10-26 14:51 ` John Garry
2015-10-26 19:55 ` kbuild test robot
2015-10-26 14:14 ` [PATCH v2 19/32] scsi: hisi_sas: add v1 HW initialisation code John Garry
2015-10-26 14:14 ` [PATCH v2 06/32] scsi: hisi_sas: add HW DMA structures John Garry
2015-10-26 14:14 ` [PATCH v2 07/32] scsi: hisi_sas: allocate memories and create pools John Garry
2015-10-26 14:14 ` [PATCH v2 08/32] scsi: hisi_sas: add hisi_sas_remove John Garry
2015-10-26 14:14 ` [PATCH v2 09/32] scsi: hisi_sas: add slot init code John Garry
2015-10-26 14:14 ` [PATCH v2 10/32] scsi: hisi_sas: add cq structure initialization John Garry
2015-10-26 14:14 ` [PATCH v2 11/32] scsi: hisi_sas: add phy SAS ADDR initialization John Garry
2015-10-26 14:14 ` [PATCH v2 12/32] scsi: hisi_sas: set dev DMA mask John Garry
2015-10-26 14:14 ` [PATCH v2 13/32] scsi: hisi_sas: add hisi_hba workqueue John Garry
2015-10-26 14:14 ` [PATCH v2 14/32] scsi: hisi_sas: add hisi sas device type John Garry
2015-10-26 14:14 ` [PATCH v2 15/32] scsi: hisi_sas: add phy and port init John Garry
2015-10-26 14:14 ` [PATCH v2 16/32] scsi: hisi_sas: add timer and spinlock init John Garry
2015-10-26 14:14 ` [PATCH v2 17/32] scsi: hisi_sas: add v1 hw module init John Garry
2015-10-26 14:14 ` [PATCH v2 18/32] scsi: hisi_sas: add v1 hardware register definitions John Garry
2015-10-26 14:14 ` [PATCH v2 20/32] scsi: hisi_sas: add v1 hw interrupt init John Garry
2015-10-26 14:14 ` [PATCH v2 21/32] scsi: hisi_sas: add path from phyup irq to SAS framework John Garry
2015-10-26 14:14 ` [PATCH v2 22/32] scsi: hisi_sas: add ssp command function John Garry
2015-10-26 14:14 ` [PATCH v2 23/32] scsi: hisi_sas: add cq interrupt handler John Garry
2015-10-26 14:14 ` [PATCH v2 24/32] scsi: hisi_sas: add dev_found and port_formed John Garry
2015-10-26 14:14 ` [PATCH v2 25/32] scsi: hisi_sas: add abnormal irq handler John Garry
[not found] ` <1445868903-183817-26-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-30 14:10 ` Arnd Bergmann
2015-10-30 16:58 ` John Garry
2015-10-26 14:14 ` [PATCH v2 26/32] scsi: hisi_sas: add bcast interrupt handler John Garry
2015-10-26 14:14 ` [PATCH v2 27/32] scsi: hisi_sas: add smp protocol support John Garry
[not found] ` <1445868903-183817-28-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-30 13:53 ` Arnd Bergmann
2015-10-30 16:22 ` John Garry
2015-11-02 17:03 ` John Garry
2015-11-02 20:29 ` Arnd Bergmann
2015-11-03 11:42 ` John Garry
[not found] ` <56389DA6.6070103-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-11-03 12:27 ` Arnd Bergmann
2015-10-26 14:14 ` [PATCH v2 28/32] scsi: hisi_sas: add scan finished and start John Garry
2015-10-26 14:15 ` [PATCH v2 29/32] scsi: hisi_sas: add tmf methods John Garry
2015-10-26 14:15 ` [PATCH v2 30/32] scsi: hisi_sas: add control phy handler John Garry
2015-10-26 14:15 ` [PATCH v2 31/32] scsi: hisi_sas: add fatal irq handler John Garry
2015-10-26 14:15 ` [PATCH v2 32/32] MAINTAINERS: add maintainer for HiSi SAS driver John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445868903-183817-6-git-send-email-john.garry@huawei.com \
--to=john.garry-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=JBottomley-wo1vFcy6AUs@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=hare-l3A5Bk7waGM@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).